lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 6 Jun 2019 12:38:29 +0000
From:   Vishal Sagar <vsagar@...inx.com>
To:     Hans Verkuil <hverkuil@...all.nl>,
        Vishal Sagar <vishal.sagar@...inx.com>,
        Hyun Kwon <hyunk@...inx.com>,
        "laurent.pinchart@...asonboard.com" 
        <laurent.pinchart@...asonboard.com>,
        "mchehab@...nel.org" <mchehab@...nel.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        Michal Simek <michals@...inx.com>,
        "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "sakari.ailus@...ux.intel.com" <sakari.ailus@...ux.intel.com>,
        "hans.verkuil@...co.com" <hans.verkuil@...co.com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Dinesh Kumar <dineshk@...inx.com>,
        Sandip Kothari <sandipk@...inx.com>,
        Luca Ceresoli <luca@...aceresoli.net>,
        Jacopo Mondi <jacopo@...ndi.org>
Subject: RE: [PATCH v8 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx
 Subsystem driver

Hi Hans,

Thanks for reviewing.

> -----Original Message-----
> From: Hans Verkuil [mailto:hverkuil@...all.nl]
> Sent: Wednesday, June 05, 2019 6:14 PM
> To: Vishal Sagar <vishal.sagar@...inx.com>; Hyun Kwon <hyunk@...inx.com>;
> laurent.pinchart@...asonboard.com; mchehab@...nel.org;
> robh+dt@...nel.org; mark.rutland@....com; Michal Simek
> <michals@...inx.com>; linux-media@...r.kernel.org;
> devicetree@...r.kernel.org; sakari.ailus@...ux.intel.com;
> hans.verkuil@...co.com; linux-arm-kernel@...ts.infradead.org; linux-
> kernel@...r.kernel.org; Dinesh Kumar <dineshk@...inx.com>; Sandip Kothari
> <sandipk@...inx.com>; Luca Ceresoli <luca@...aceresoli.net>; Jacopo Mondi
> <jacopo@...ndi.org>
> Subject: Re: [PATCH v8 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx
> Subsystem driver
> 
> EXTERNAL EMAIL
> 
> Hi Vishal,
> 
> Some comments below...
> 
> On 6/3/19 11:59 AM, Vishal Sagar wrote:
> > The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
> > from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
> > for image processing. Please refer to PG232 for details.
> >
> > The driver is used to set the number of active lanes, if enabled
> > in hardware. The CSI2 Rx controller filters out all packets except for
> > the packets with data type fixed in hardware. RAW8 packets are always
> > allowed to pass through.
> >
> > It is also used to setup and handle interrupts and enable the core. It
> > logs all the events in respective counters between streaming on and off.
> >
> > The driver supports only the video format bridge enabled configuration.
> > Some data types like YUV 422 10bpc, RAW16, RAW20 are supported when
> the
> > CSI v2.0 feature is enabled in design. When the VCX feature is enabled,
> > the maximum number of virtual channels becomes 16 from 4.
> >
> > Signed-off-by: Vishal Sagar <vishal.sagar@...inx.com>
> > Reviewed-by: Hyun Kwon <hyun.kwon@...inx.com>
> > ---
> > v8
> > - Use clk_bulk* APIs
> > - Add gpio reset for asserting video_aresetn when stream line buffer occurs
> > - Removed short packet related events and irq handling
> >   - V4L2_EVENT_XLNXCSIRX_SPKT and V4L2_EVENT_XLNXCSIRX_SPKT_OVF
> removed
> > - Removed frame counter control
> V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER
> >   and xcsi2rxss_g_volatile_ctrl()
> > - Minor formatting fixes
> >
> > v7
> > - No change
> >
> > v6
> > - No change
> >
> > v5
> > - Removed bayer and updated related parts like set default format based
> >   on Luca Cersoli's comments.
> > - Added correct YUV422 10bpc media bus format
> >
> > v4
> > - Removed irq member from core structure
> > - Consolidated IP config prints in xcsi2rxss_log_ipconfig()
> > - Return -EINVAL in case of invalid ioctl
> > - Code formatting
> > - Added reviewed by Hyun Kwon
> >
> > v3
> > - Fixed comments given by Hyun.
> > - Removed DPHY 200 MHz clock. This will be controlled by DPHY driver
> > - Minor code formatting
> > - en_csi_v20 and vfb members removed from struct and made local to dt
> parsing
> > - lock description updated
> > - changed to ratelimited type for all dev prints in irq handler
> > - Removed YUV 422 10bpc media format
> >
> > v2
> > - Fixed comments given by Hyun and Sakari.
> > - Made all bitmask using BIT() and GENMASK()
> > - Removed unused definitions
> > - Removed DPHY access. This will be done by separate DPHY PHY driver.
> > - Added support for CSI v2.0 for YUV 422 10bpc, RAW16, RAW20 and extra
> >   virtual channels
> > - Fixed the ports as sink and source
> > - Now use the v4l2fwnode API to get number of data-lanes
> > - Added clock framework support
> > - Removed the close() function
> > - updated the set format function
> > - support only VFB enabled configuration
> >
> >  drivers/media/platform/xilinx/Kconfig           |   10 +
> >  drivers/media/platform/xilinx/Makefile          |    1 +
> >  drivers/media/platform/xilinx/xilinx-csi2rxss.c | 1406
> +++++++++++++++++++++++
> >  include/uapi/linux/xilinx-v4l2-controls.h       |   12 +
> >  include/uapi/linux/xilinx-v4l2-events.h         |   21 +
> >  5 files changed, 1450 insertions(+)
> >  create mode 100644 drivers/media/platform/xilinx/xilinx-csi2rxss.c
> >  create mode 100644 include/uapi/linux/xilinx-v4l2-events.h
> >
> > diff --git a/drivers/media/platform/xilinx/Kconfig
> b/drivers/media/platform/xilinx/Kconfig
> > index a2773ad..cd1a0fd 100644
> > --- a/drivers/media/platform/xilinx/Kconfig
> > +++ b/drivers/media/platform/xilinx/Kconfig
> > @@ -10,6 +10,16 @@ config VIDEO_XILINX
> >
> >  if VIDEO_XILINX
> >
> > +config VIDEO_XILINX_CSI2RXSS
> > +     tristate "Xilinx CSI2 Rx Subsystem"
> > +     help
> > +       Driver for Xilinx MIPI CSI2 Rx Subsystem. This is a V4L sub-device
> > +       based driver that takes input from CSI2 Tx source and converts
> > +       it into an AXI4-Stream. The subsystem comprises of a CSI2 Rx
> > +       controller, DPHY, an optional I2C controller and a Video Format
> > +       Bridge. The driver is used to set the number of active lanes and
> > +       get short packet data.
> > +
> >  config VIDEO_XILINX_TPG
> >       tristate "Xilinx Video Test Pattern Generator"
> >       depends on VIDEO_XILINX
> > diff --git a/drivers/media/platform/xilinx/Makefile
> b/drivers/media/platform/xilinx/Makefile
> > index 4cdc0b1..6119a34 100644
> > --- a/drivers/media/platform/xilinx/Makefile
> > +++ b/drivers/media/platform/xilinx/Makefile
> > @@ -3,5 +3,6 @@
> >  xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o
> >
> >  obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o
> > +obj-$(CONFIG_VIDEO_XILINX_CSI2RXSS) += xilinx-csi2rxss.o
> >  obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o
> >  obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o
> > diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > new file mode 100644
> > index 0000000..51bb80c
> > --- /dev/null
> > +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > @@ -0,0 +1,1406 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Xilinx MIPI CSI2 Rx Subsystem
> > + *
> > + * Copyright (C) 2016 - 2019 Xilinx, Inc.
> > + *
> > + * Contacts: Vishal Sagar <vishal.sagar@...inx.com>
> > + *
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/v4l2-subdev.h>
> > +#include <linux/xilinx-v4l2-controls.h>
> > +#include <linux/xilinx-v4l2-events.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-common.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +#include "xilinx-vip.h"
> > +
> > +/* Register register map */
> > +#define XCSI_CCR_OFFSET              0x00
> > +#define XCSI_CCR_SOFTRESET   BIT(1)
> > +#define XCSI_CCR_ENABLE              BIT(0)
> > +
> > +#define XCSI_PCR_OFFSET              0x04
> > +#define XCSI_PCR_MAXLANES_MASK       GENMASK(4, 3)
> > +#define XCSI_PCR_ACTLANES_MASK       GENMASK(1, 0)
> > +
> > +#define XCSI_CSR_OFFSET              0x10
> > +#define XCSI_CSR_PKTCNT              GENMASK(31, 16)
> > +#define XCSI_CSR_SPFIFOFULL  BIT(3)
> > +#define XCSI_CSR_SPFIFONE    BIT(2)
> > +#define XCSI_CSR_SLBF                BIT(1)
> > +#define XCSI_CSR_RIPCD               BIT(0)
> > +
> > +#define XCSI_GIER_OFFSET     0x20
> > +#define XCSI_GIER_GIE                BIT(0)
> > +
> > +#define XCSI_ISR_OFFSET              0x24
> > +#define XCSI_IER_OFFSET              0x28
> > +
> > +#define XCSI_ISR_FR          BIT(31)
> > +#define XCSI_ISR_VCXFE               BIT(30)
> > +#define XCSI_ISR_WCC         BIT(22)
> > +#define XCSI_ISR_ILC         BIT(21)
> > +#define XCSI_ISR_SPFIFOF     BIT(20)
> > +#define XCSI_ISR_SPFIFONE    BIT(19)
> > +#define XCSI_ISR_SLBF                BIT(18)
> > +#define XCSI_ISR_STOP                BIT(17)
> > +#define XCSI_ISR_SOTERR              BIT(13)
> > +#define XCSI_ISR_SOTSYNCERR  BIT(12)
> > +#define XCSI_ISR_ECC2BERR    BIT(11)
> > +#define XCSI_ISR_ECC1BERR    BIT(10)
> > +#define XCSI_ISR_CRCERR              BIT(9)
> > +#define XCSI_ISR_DATAIDERR   BIT(8)
> > +#define XCSI_ISR_VC3FSYNCERR BIT(7)
> > +#define XCSI_ISR_VC3FLVLERR  BIT(6)
> > +#define XCSI_ISR_VC2FSYNCERR BIT(5)
> > +#define XCSI_ISR_VC2FLVLERR  BIT(4)
> > +#define XCSI_ISR_VC1FSYNCERR BIT(3)
> > +#define XCSI_ISR_VC1FLVLERR  BIT(2)
> > +#define XCSI_ISR_VC0FSYNCERR BIT(1)
> > +#define XCSI_ISR_VC0FLVLERR  BIT(0)
> > +
> > +#define XCSI_INTR_PROT_MASK  (XCSI_ISR_VC3FSYNCERR |
> XCSI_ISR_VC3FLVLERR |\
> > +                              XCSI_ISR_VC2FSYNCERR | XCSI_ISR_VC2FLVLERR |\
> > +                              XCSI_ISR_VC1FSYNCERR | XCSI_ISR_VC1FLVLERR |\
> > +                              XCSI_ISR_VC0FSYNCERR | XCSI_ISR_VC0FLVLERR |\
> > +                              XCSI_ISR_VCXFE)
> > +
> > +#define XCSI_INTR_PKTLVL_MASK        (XCSI_ISR_ECC2BERR |
> XCSI_ISR_ECC1BERR |\
> > +                              XCSI_ISR_CRCERR | XCSI_ISR_DATAIDERR)
> > +
> > +#define XCSI_INTR_DPHY_MASK  (XCSI_ISR_SOTERR |
> XCSI_ISR_SOTSYNCERR)
> > +
> > +#define XCSI_INTR_SPKT_MASK  (XCSI_ISR_SPFIFOF | XCSI_ISR_SPFIFONE)
> > +
> > +#define XCSI_INTR_ERR_MASK   (XCSI_ISR_WCC | XCSI_ISR_ILC |
> XCSI_ISR_SLBF |\
> > +                              XCSI_ISR_STOP)
> > +
> > +#define XCSI_INTR_FRAMERCVD_MASK     (XCSI_ISR_FR)
> > +
> > +#define XCSI_ISR_ALLINTR_MASK        (XCSI_INTR_PROT_MASK |
> XCSI_INTR_PKTLVL_MASK |\
> > +                              XCSI_INTR_DPHY_MASK | XCSI_INTR_SPKT_MASK |\
> > +                              XCSI_INTR_ERR_MASK | XCSI_INTR_FRAMERCVD_MASK)
> > +
> > +/*
> > + * Removed VCXFE mask as it doesn't exist in IER
> > + * Removed STOP state irq as this will keep driver in irq handler only
> > + */
> > +#define XCSI_IER_INTR_MASK   (XCSI_ISR_ALLINTR_MASK &\
> > +                              ~(XCSI_ISR_STOP | XCSI_ISR_VCXFE))
> > +
> > +#define XCSI_SPKTR_OFFSET    0x30
> > +#define XCSI_SPKTR_DATA              GENMASK(23, 8)
> > +#define XCSI_SPKTR_VC                GENMASK(7, 6)
> > +#define XCSI_SPKTR_DT                GENMASK(5, 0)
> > +
> > +#define XCSI_VCXR_OFFSET     0x34
> > +#define XCSI_VCXR_VCERR              GENMASK(23, 0)
> > +#define XCSI_VCXR_VCSTART    4
> > +#define XCSI_VCXR_VCEND              15
> > +#define XCSI_VCXR_FSYNCERR   BIT(1)
> > +#define XCSI_VCXR_FLVLERR    BIT(0)
> > +
> > +#define XCSI_CLKINFR_OFFSET  0x3C
> > +#define XCSI_CLKINFR_STOP    BIT(1)
> > +
> > +#define XCSI_DLXINFR_OFFSET  0x40
> > +#define XCSI_DLXINFR_STOP    BIT(5)
> > +#define XCSI_DLXINFR_SOTERR  BIT(1)
> > +#define XCSI_DLXINFR_SOTSYNCERR      BIT(0)
> > +#define XCSI_MAXDL_COUNT     0x4
> > +
> > +#define XCSI_VCXINF1R_OFFSET         0x60
> > +#define XCSI_VCXINF1R_LINECOUNT              GENMASK(31, 16)
> > +#define XCSI_VCXINF1R_LINECOUNT_SHIFT        16
> > +#define XCSI_VCXINF1R_BYTECOUNT              GENMASK(15, 0)
> > +
> > +#define XCSI_VCXINF2R_OFFSET 0x64
> > +#define XCSI_VCXINF2R_DT     GENMASK(5, 0)
> > +#define XCSI_MAXVCX_COUNT    16
> > +
> > +/*
> > + * The core takes less than 100 video clock cycles to reset.
> > + * So choosing a timeout value larger than this.
> > + */
> > +#define XCSI_TIMEOUT_VAL     1000 /* us */
> > +
> > +/* Maximum short packet events */
> > +#define XCSI_MAX_SPKT_EVENT  64
> > +
> > +/*
> > + * Sink pad connected to sensor source pad.
> > + * Source pad connected to next module like demosaic.
> > + */
> > +#define XCSI_MEDIA_PADS              2
> > +#define XCSI_DEFAULT_WIDTH   1920
> > +#define XCSI_DEFAULT_HEIGHT  1080
> > +
> > +/* Max string length for CSI Data type string */
> > +#define XCSI_PXLFMT_STRLEN_MAX       16
> > +
> > +/* MIPI CSI2 Data Types from spec */
> > +#define XCSI_DT_YUV4228B     0x1E
> > +#define XCSI_DT_YUV42210B    0x1F
> > +#define XCSI_DT_RGB444               0x20
> > +#define XCSI_DT_RGB555               0x21
> > +#define XCSI_DT_RGB565               0x22
> > +#define XCSI_DT_RGB666               0x23
> > +#define XCSI_DT_RGB888               0x24
> > +#define XCSI_DT_RAW6         0x28
> > +#define XCSI_DT_RAW7         0x29
> > +#define XCSI_DT_RAW8         0x2A
> > +#define XCSI_DT_RAW10                0x2B
> > +#define XCSI_DT_RAW12                0x2C
> > +#define XCSI_DT_RAW14                0x2D
> > +#define XCSI_DT_RAW16                0x2E
> > +#define XCSI_DT_RAW20                0x2F
> > +
> > +#define XCSI_VCX_START               4
> > +#define XCSI_MAX_VC          4
> > +#define XCSI_MAX_VCX         16
> > +
> > +#define XCSI_NEXTREG_OFFSET  4
> > +
> > +/* There are 2 events frame sync and frame level error per VC */
> > +#define XCSI_VCX_NUM_EVENTS  ((XCSI_MAX_VCX - XCSI_MAX_VC) * 2)
> > +
> > +/* Macro to return "true" or "false" string if bit is set */
> > +#define XCSI_GET_BITSET_STR(val, mask)       (val) & (mask) ? "true" : "false"
> > +
> > +/**
> > + * struct xcsi2rxss_event - Event log structure
> > + * @mask: Event mask
> > + * @name: Name of the event
> > + * @counter: Count number of events
> > + */
> > +struct xcsi2rxss_event {
> > +     u32 mask;
> > +     const char *const name;
> > +     unsigned int counter;
> > +};
> > +
> > +/*
> > + * struct xcsi2rxss_core - Core configuration CSI2 Rx Subsystem device
> structure
> > + * @dev: Platform structure
> > + * @iomem: Base address of subsystem
> > + * @enable_active_lanes: If number of active lanes can be modified
> > + * @max_num_lanes: Maximum number of lanes present
> > + * @datatype: Data type filter
> > + * @events: Structure to maintain event logs
> > + * @vcx_events: Structure to maintain VCX event logs
> > + * @en_vcx: If more than 4 VC are enabled
> > + * @clks: array of clocks
> > + * @num_clks: number of clocks
> > + * @rst_gpio: reset to video_aresetn
> > + */
> > +struct xcsi2rxss_core {
> > +     struct device *dev;
> > +     void __iomem *iomem;
> > +     bool enable_active_lanes;
> > +     u32 max_num_lanes;
> > +     u32 datatype;
> > +     struct xcsi2rxss_event *events;
> > +     struct xcsi2rxss_event *vcx_events;
> > +     bool en_vcx;
> > +     struct clk_bulk_data *clks;
> > +     int num_clks;
> > +     struct gpio_desc *rst_gpio;
> > +};
> > +
> > +/**
> > + * struct xcsi2rxss_state - CSI2 Rx Subsystem device structure
> > + * @core: Core structure for MIPI CSI2 Rx Subsystem
> > + * @subdev: The v4l2 subdev structure
> > + * @ctrl_handler: control handler
> > + * @format: Active V4L2 formats on each pad
> > + * @event: Holds the short packet event
> > + * @lock: mutex for accessing this structure
> > + * @pads: media pads
> > + * @streaming: Flag for storing streaming state
> > + *
> > + * This structure contains the device driver related parameters
> > + */
> > +struct xcsi2rxss_state {
> > +     struct xcsi2rxss_core core;
> > +     struct v4l2_subdev subdev;
> > +     struct v4l2_ctrl_handler ctrl_handler;
> > +     struct v4l2_mbus_framefmt format;
> > +     struct v4l2_event event;
> > +     /* used to protect access to this struct */
> > +     struct mutex lock;
> > +     struct media_pad pads[XCSI_MEDIA_PADS];
> > +     bool streaming;
> > +};
> > +
> > +static struct xcsi2rxss_event xcsi2rxss_events[] = {
> > +     { XCSI_ISR_FR, "Frame Received", 0 },
> > +     { XCSI_ISR_VCXFE, "VCX Frame Errors", 0 },
> > +     { XCSI_ISR_WCC, "Word Count Errors", 0 },
> > +     { XCSI_ISR_ILC, "Invalid Lane Count Error", 0 },
> > +     { XCSI_ISR_SPFIFOF, "Short Packet FIFO OverFlow Error", 0 },
> > +     { XCSI_ISR_SPFIFONE, "Short Packet FIFO Not Empty", 0 },
> > +     { XCSI_ISR_SLBF, "Streamline Buffer Full Error", 0 },
> > +     { XCSI_ISR_STOP, "Lane Stop State", 0 },
> > +     { XCSI_ISR_SOTERR, "SOT Error", 0 },
> > +     { XCSI_ISR_SOTSYNCERR, "SOT Sync Error", 0 },
> > +     { XCSI_ISR_ECC2BERR, "2 Bit ECC Unrecoverable Error", 0 },
> > +     { XCSI_ISR_ECC1BERR, "1 Bit ECC Recoverable Error", 0 },
> > +     { XCSI_ISR_CRCERR, "CRC Error", 0 },
> > +     { XCSI_ISR_DATAIDERR, "Data Id Error", 0 },
> > +     { XCSI_ISR_VC3FSYNCERR, "Virtual Channel 3 Frame Sync Error", 0 },
> > +     { XCSI_ISR_VC3FLVLERR, "Virtual Channel 3 Frame Level Error", 0 },
> > +     { XCSI_ISR_VC2FSYNCERR, "Virtual Channel 2 Frame Sync Error", 0 },
> > +     { XCSI_ISR_VC2FLVLERR, "Virtual Channel 2 Frame Level Error", 0 },
> > +     { XCSI_ISR_VC1FSYNCERR, "Virtual Channel 1 Frame Sync Error", 0 },
> > +     { XCSI_ISR_VC1FLVLERR, "Virtual Channel 1 Frame Level Error", 0 },
> > +     { XCSI_ISR_VC0FSYNCERR, "Virtual Channel 0 Frame Sync Error", 0 },
> > +     { XCSI_ISR_VC0FLVLERR, "Virtual Channel 0 Frame Level Error", 0 }
> > +};
> > +
> > +#define XCSI_NUM_EVENTS              ARRAY_SIZE(xcsi2rxss_events)
> > +
> > +static const struct clk_bulk_data xcsi2rxss_clks[] = {
> > +     { .id = "lite_aclk" },
> > +     { .id = "video_aclk" },
> > +};
> > +
> > +static inline struct xcsi2rxss_state *
> > +to_xcsi2rxssstate(struct v4l2_subdev *subdev)
> > +{
> > +     return container_of(subdev, struct xcsi2rxss_state, subdev);
> > +}
> > +
> > +/*
> > + * Register related operations
> > + */
> > +static inline u32 xcsi2rxss_read(struct xcsi2rxss_core *xcsi2rxss, u32 addr)
> > +{
> > +     return ioread32(xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_write(struct xcsi2rxss_core *xcsi2rxss, u32 addr,
> > +                                u32 value)
> > +{
> > +     iowrite32(value, xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_clr(struct xcsi2rxss_core *xcsi2rxss, u32 addr,
> > +                              u32 clr)
> > +{
> > +     xcsi2rxss_write(xcsi2rxss, addr,
> > +                     xcsi2rxss_read(xcsi2rxss, addr) & ~clr);
> > +}
> > +
> > +static inline void xcsi2rxss_set(struct xcsi2rxss_core *xcsi2rxss, u32 addr,
> > +                              u32 set)
> > +{
> > +     xcsi2rxss_write(xcsi2rxss, addr,
> > +                     xcsi2rxss_read(xcsi2rxss, addr) | set);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_clr_and_set - Clear and set the register with a bitmask
> > + * @xcsi2rxss: Xilinx MIPI CSI2 Rx Subsystem subdev core struct
> > + * @addr: address of register
> > + * @clr: bitmask to be cleared
> > + * @set: bitmask to be set
> > + *
> > + * Clear a bit(s) of mask @clr in the register at address @addr, then set
> > + * a bit(s) of mask @set in the register after.
> > + */
> > +static void xcsi2rxss_clr_and_set(struct xcsi2rxss_core *xcsi2rxss,
> > +                               u32 addr, u32 clr, u32 set)
> > +{
> > +     u32 reg;
> > +
> > +     reg = xcsi2rxss_read(xcsi2rxss, addr);
> > +     reg &= ~clr;
> > +     reg |= set;
> > +     xcsi2rxss_write(xcsi2rxss, addr, reg);
> > +}
> > +
> > +static void xcsi2rxss_enable(struct xcsi2rxss_core *core)
> > +{
> > +     xcsi2rxss_set(core, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE);
> > +}
> > +
> > +static void xcsi2rxss_disable(struct xcsi2rxss_core *core)
> > +{
> > +     xcsi2rxss_clr(core, XCSI_CCR_OFFSET, XCSI_CCR_ENABLE);
> > +}
> > +
> > +static void xcsi2rxss_intr_enable(struct xcsi2rxss_core *core)
> > +{
> > +     xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE);
> > +     xcsi2rxss_write(core, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK);
> > +     xcsi2rxss_set(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE);
> > +}
> > +
> > +static void xcsi2rxss_intr_disable(struct xcsi2rxss_core *core)
> > +{
> > +     xcsi2rxss_clr(core, XCSI_IER_OFFSET, XCSI_IER_INTR_MASK);
> > +     xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_reset - Does a soft reset of the MIPI CSI2 Rx Subsystem
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + *
> > + * Core takes less than 100 video clock cycles to reset.
> > + * So a larger timeout value is chosen for margin.
> > + *
> > + * Return: 0 - on success OR -ETIME if reset times out
> > + */
> > +static int xcsi2rxss_reset(struct xcsi2rxss_core *core)
> > +{
> > +     u32 timeout = XCSI_TIMEOUT_VAL;
> > +
> > +     xcsi2rxss_set(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET);
> > +
> > +     while (xcsi2rxss_read(core, XCSI_CSR_OFFSET) & XCSI_CSR_RIPCD) {
> > +             if (timeout == 0) {
> > +                     dev_err(core->dev, "soft reset timed out!\n");
> > +                     return -ETIME;
> > +             }
> > +
> > +             timeout--;
> > +             udelay(1);
> > +     }
> > +
> > +     xcsi2rxss_clr(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET);
> > +     return 0;
> > +}
> > +
> > +static void xcsi2rxss_reset_event_counters(struct xcsi2rxss_state *state)
> > +{
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < XCSI_NUM_EVENTS; i++)
> > +             state->core.events[i].counter = 0;
> > +
> > +     if (state->core.en_vcx) {
> > +             for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++)
> > +                     state->core.vcx_events[i].counter = 0;
> > +     }
> > +}
> > +
> > +/* Print event counters */
> > +static void xcsi2rxss_log_counters(struct xcsi2rxss_state *state)
> > +{
> > +     struct xcsi2rxss_core *core = &state->core;
> > +     int i;
> > +
> > +     for (i = 0; i < XCSI_NUM_EVENTS; i++) {
> > +             if (core->events[i].counter > 0) {
> > +                     dev_info(core->dev, "%s events: %d\n",
> > +                              core->events[i].name,
> > +                              core->events[i].counter);
> > +             }
> > +     }
> > +
> > +     if (core->en_vcx) {
> > +             for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) {
> > +                     if (core->vcx_events[i].counter > 0) {
> > +                             dev_info(core->dev,
> > +                                      "VC %d Frame %s err vcx events: %d\n",
> > +                                      (i / 2) + XCSI_VCX_START,
> > +                                      i & 1 ? "Sync" : "Level",
> > +                                      core->vcx_events[i].counter);
> > +                     }
> > +             }
> > +     }
> > +}
> > +
> > +static void xcsi2rxss_log_ipconfig(struct xcsi2rxss_state *state)
> > +{
> > +     struct xcsi2rxss_core *core = &state->core;
> > +
> > +     dev_dbg(core->dev, "****** Xilinx MIPI CSI2 Rx SS IP Config ******\n");
> > +     dev_dbg(core->dev, "vcx is %s", core->en_vcx ? "enabled" : "disabled");
> > +     dev_dbg(core->dev, "Enable active lanes property is %s\n",
> > +             core->enable_active_lanes ? "present" : "absent");
> > +     dev_dbg(core->dev, "Max lanes = %d", core->max_num_lanes);
> > +     dev_dbg(core->dev, "Pixel format set as 0x%x\n", core->datatype);
> > +     dev_dbg(core->dev,
> "**********************************************\n");
> > +}
> > +
> > +/**
> > + * xcsi2rxss_log_status - Logs the status of the CSI-2 Receiver
> > + * @sd: Pointer to V4L2 subdevice structure
> > + *
> > + * This function prints the current status of Xilinx MIPI CSI-2
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_log_status(struct v4l2_subdev *sd)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +     unsigned int reg, data, i, max_vc;
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +
> > +     xcsi2rxss_log_ipconfig(xcsi2rxss);
> > +
> > +     xcsi2rxss_log_counters(xcsi2rxss);
> > +
> > +     dev_info(core->dev, "***** Core Status *****\n");
> > +     data = xcsi2rxss_read(core, XCSI_CSR_OFFSET);
> > +     dev_info(core->dev, "Short Packet FIFO Full = %s\n",
> > +              XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFOFULL));
> > +     dev_info(core->dev, "Short Packet FIFO Not Empty = %s\n",
> > +              XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFONE));
> > +     dev_info(core->dev, "Stream line buffer full = %s\n",
> > +              XCSI_GET_BITSET_STR(data, XCSI_CSR_SLBF));
> > +     dev_info(core->dev, "Soft reset/Core disable in progress = %s\n",
> > +              XCSI_GET_BITSET_STR(data, XCSI_CSR_RIPCD));
> > +
> > +     /* Clk & Lane Info  */
> > +     dev_info(core->dev, "******** Clock Lane Info *********\n");
> > +     data = xcsi2rxss_read(core, XCSI_CLKINFR_OFFSET);
> > +     dev_info(core->dev, "Clock Lane in Stop State = %s\n",
> > +              XCSI_GET_BITSET_STR(data, XCSI_CLKINFR_STOP));
> > +
> > +     dev_info(core->dev, "******** Data Lane Info *********\n");
> > +     dev_info(core->dev, "Lane\tSoT Error\tSoT Sync Error\tStop State\n");
> > +     reg = XCSI_DLXINFR_OFFSET;
> > +     for (i = 0; i < XCSI_MAXDL_COUNT; i++) {
> > +             data = xcsi2rxss_read(core, reg);
> > +
> > +             dev_info(core->dev, "%d\t%s\t\t%s\t\t%s\n", i,
> > +                      XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_SOTERR),
> > +                      XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_SOTSYNCERR),
> > +                      XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_STOP));
> > +
> > +             reg += XCSI_NEXTREG_OFFSET;
> > +     }
> > +
> > +     /* Virtual Channel Image Information */
> > +     dev_info(core->dev, "********** Virtual Channel Info
> ************\n");
> > +     dev_info(core->dev, "VC\tLine Count\tByte Count\tData Type\n");
> > +     if (core->en_vcx)
> > +             max_vc = XCSI_MAX_VCX;
> > +     else
> > +             max_vc = XCSI_MAX_VC;
> > +
> > +     reg = XCSI_VCXINF1R_OFFSET;
> > +     for (i = 0; i < max_vc; i++) {
> > +             u32 line_count, byte_count, data_type;
> > +
> > +             /* Get line and byte count from VCXINFR1 Register */
> > +             data = xcsi2rxss_read(core, reg);
> > +             byte_count = data & XCSI_VCXINF1R_BYTECOUNT;
> > +             line_count = data & XCSI_VCXINF1R_LINECOUNT;
> > +             line_count >>= XCSI_VCXINF1R_LINECOUNT_SHIFT;
> > +
> > +             /* Get data type from VCXINFR2 Register */
> > +             reg += XCSI_NEXTREG_OFFSET;
> > +             data = xcsi2rxss_read(core, reg);
> > +             data_type = data & XCSI_VCXINF2R_DT;
> > +
> > +             dev_info(core->dev, "%d\t%d\t\t%d\t\t0x%x\n", i, line_count,
> > +                      byte_count, data_type);
> > +
> > +             /* Move to next pair of VC Info registers */
> > +             reg += XCSI_NEXTREG_OFFSET;
> > +     }
> > +
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +/*
> > + * xcsi2rxss_subscribe_event - Subscribe to the custom short packet
> > + * receive event.
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 File Handle
> > + * @sub: Subcribe event structure
> > + *
> > + * There are two types of events to be subscribed.
> > + *
> > + * First is to register for receiving a generic short packet.
> > + * The generic short packets received are queued up in a FIFO.
> > + * On reception of a generic short packet, an event will be generated
> > + * with the short packet contents copied to its data area.
> > + * Application subscribed to this event will poll for POLLPRI.
> > + * On getting the event, the app dequeues the event to get the short packet
> > + * data.
> > + *
> > + * Second is to register for Short packet FIFO overflow
> > + * In case the rate of receiving short packets is high and
> > + * the short packet FIFO overflows, this event will be triggered.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_subscribe_event(struct v4l2_subdev *sd,
> > +                                  struct v4l2_fh *fh,
> > +                                  struct v4l2_event_subscription *sub)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     int ret;
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +
> > +     switch (sub->type) {
> > +     case V4L2_EVENT_XLNXCSIRX_SLBF:
> > +             ret = v4l2_event_subscribe(fh, sub, XCSI_MAX_SPKT_EVENT, NULL);
> > +             break;
> > +     default:
> > +             ret = -EINVAL;
> > +     }
> > +
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_unsubscribe_event - Unsubscribe from all events registered
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 file handle
> > + * @sub: pointer to Event unsubscription structure
> > + *
> > + * Return: zero on success, else a negative error code.
> > + */
> > +static int xcsi2rxss_unsubscribe_event(struct v4l2_subdev *sd,
> > +                                    struct v4l2_fh *fh,
> > +                                    struct v4l2_event_subscription *sub)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     int ret;
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +     ret = v4l2_event_unsubscribe(fh, sub);
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_ctrl - This is used to set the Xilinx MIPI CSI-2 V4L2 controls
> > + * @ctrl: V4L2 control to be set
> > + *
> > + * This function is used to set the V4L2 controls for the Xilinx MIPI
> > + * CSI-2 Rx Subsystem. It is used to set the active lanes in the system.
> > + * The event counters can be reset.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss =
> > +             container_of(ctrl->handler, struct xcsi2rxss_state,
> > +                          ctrl_handler);
> > +     struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +     int ret = 0;
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +
> > +     switch (ctrl->id) {
> > +     case V4L2_CID_XILINX_MIPICSISS_ACT_LANES:
> > +             /*
> > +              * This will be called only when "Enable Active Lanes" parameter
> > +              * is set in design
> > +              */
> > +             if (core->enable_active_lanes) {
> > +                     u32 active_lanes;
> > +
> > +                     xcsi2rxss_clr_and_set(core, XCSI_PCR_OFFSET,
> > +                                           XCSI_PCR_ACTLANES_MASK,
> > +                                           ctrl->val - 1);
> > +                     /*
> > +                      * This delay is to allow the value to reflect as write
> > +                      * and read paths are different.
> > +                      */
> > +                     udelay(1);
> > +                     active_lanes = xcsi2rxss_read(core, XCSI_PCR_OFFSET);
> > +                     active_lanes &= XCSI_PCR_ACTLANES_MASK;
> > +                     active_lanes++;
> > +                     if (active_lanes != ctrl->val)
> > +                             dev_info(core->dev, "RxByteClkHS absent\n");
> > +                     dev_dbg(core->dev, "active lanes = %d\n", ctrl->val);
> > +             } else {
> > +                     ret = -EINVAL;
> > +             }
> > +             break;
> > +     case V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS:
> > +             xcsi2rxss_reset_event_counters(xcsi2rxss);
> > +             break;
> > +     default:
> > +             ret = -EINVAL;
> > +             break;
> > +     }
> > +
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static int xcsi2rxss_start_stream(struct xcsi2rxss_state *state)
> > +{
> > +     struct xcsi2rxss_core *core = &state->core;
> > +     int ret = 0;
> > +
> > +     xcsi2rxss_enable(core);
> > +
> > +     ret = xcsi2rxss_reset(core);
> > +     if (ret < 0) {
> > +             state->streaming = false;
> > +             return ret;
> > +     }
> > +
> > +     xcsi2rxss_intr_enable(core);
> > +     state->streaming = true;
> > +
> > +     return ret;
> > +}
> > +
> > +static void xcsi2rxss_stop_stream(struct xcsi2rxss_state *state)
> > +{
> > +     struct xcsi2rxss_core *core = &state->core;
> > +
> > +     xcsi2rxss_intr_disable(core);
> > +     xcsi2rxss_disable(core);
> > +     state->streaming = false;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_irq_handler - Interrupt handler for CSI-2
> > + * @irq: IRQ number
> > + * @dev_id: Pointer to device state
> > + *
> > + * In the interrupt handler, a list of event counters are updated for
> > + * corresponding interrupts. This is useful to get status / debug.
> > + * If the short packet FIFO not empty or overflow interrupt is received
> > + * capture the short packet and notify of event occurrence
> > + *
> > + * Return: IRQ_HANDLED after handling interrupts
> > + *         IRQ_NONE is no interrupts
> > + */
> > +static irqreturn_t xcsi2rxss_irq_handler(int irq, void *dev_id)
> > +{
> > +     struct xcsi2rxss_state *state = (struct xcsi2rxss_state *)dev_id;
> > +     struct xcsi2rxss_core *core = &state->core;
> > +     u32 status;
> > +
> > +     status = xcsi2rxss_read(core, XCSI_ISR_OFFSET) &
> XCSI_ISR_ALLINTR_MASK;
> > +     dev_dbg_ratelimited(core->dev, "interrupt status = 0x%08x\n", status);
> > +
> > +     if (!status)
> > +             return IRQ_NONE;
> > +
> > +     /* Received a short packet */
> > +     if (status & XCSI_ISR_SPFIFONE) {
> > +             dev_dbg_ratelimited(core->dev, "Short packet = 0x%08x\n",
> > +                                 xcsi2rxss_read(core, XCSI_SPKTR_OFFSET));
> > +     }
> > +
> > +     /* Short packet FIFO overflow */
> > +     if (status & XCSI_ISR_SPFIFOF)
> > +             dev_alert_ratelimited(core->dev, "Short packet FIFO overflowed\n");
> > +
> > +     /*
> > +      * Stream line buffer full
> > +      * This means there is a backpressure from downstream IP
> > +      */
> > +     if (status & XCSI_ISR_SLBF) {
> > +             dev_alert_ratelimited(core->dev, "Stream Line Buffer Full!\n");
> > +             if (core->rst_gpio) {
> > +                     gpiod_set_value(core->rst_gpio, 1);
> > +                     /* minimum 40 dphy_clk_200M cycles */
> > +                     ndelay(250);
> > +                     gpiod_set_value(core->rst_gpio, 0);
> > +             }
> > +             xcsi2rxss_stop_stream(state);
> > +             memset(&state->event, 0, sizeof(state->event));
> > +             state->event.type = V4L2_EVENT_XLNXCSIRX_SLBF;
> > +             v4l2_subdev_notify_event(&state->subdev, &state->event);
> > +     }
> > +
> > +     /* Increment event counters */
> > +     if (status & XCSI_ISR_ALLINTR_MASK) {
> > +             unsigned int i;
> > +
> > +             for (i = 0; i < XCSI_NUM_EVENTS; i++) {
> > +                     if (!(status & core->events[i].mask))
> > +                             continue;
> > +                     core->events[i].counter++;
> > +                     dev_dbg_ratelimited(core->dev, "%s: %d\n",
> > +                                         core->events[i].name,
> > +                                         core->events[i].counter);
> > +             }
> > +
> > +             if (status & XCSI_ISR_VCXFE && core->en_vcx) {
> > +                     u32 vcxstatus;
> > +
> > +                     vcxstatus = xcsi2rxss_read(core, XCSI_VCXR_OFFSET);
> > +                     vcxstatus &= XCSI_VCXR_VCERR;
> > +                     for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) {
> > +                             if (!(vcxstatus & core->vcx_events[i].mask))
> > +                                     continue;
> > +                             core->vcx_events[i].counter++;
> > +                     }
> > +                     xcsi2rxss_write(core, XCSI_VCXR_OFFSET, vcxstatus);
> > +             }
> > +     }
> > +
> > +     xcsi2rxss_write(core, XCSI_ISR_OFFSET, status);
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_stream - It is used to start/stop the streaming.
> > + * @sd: V4L2 Sub device
> > + * @enable: Flag (True / False)
> > + *
> > + * This function controls the start or stop of streaming for the
> > + * Xilinx MIPI CSI-2 Rx Subsystem.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     int ret = 0;
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +
> > +     if (enable) {
> > +             if (!xcsi2rxss->streaming) {
> > +                     /* reset the event counters */
> > +                     xcsi2rxss_reset_event_counters(xcsi2rxss);
> > +                     ret = xcsi2rxss_start_stream(xcsi2rxss);
> > +             }
> > +     } else {
> > +             if (xcsi2rxss->streaming) {
> > +                     struct gpio_desc *rst = xcsi2rxss->core.rst_gpio;
> > +
> > +                     if (rst) {
> > +                             gpiod_set_value_cansleep(rst, 1);
> > +                             usleep_range(1, 2);
> > +                             gpiod_set_value_cansleep(rst, 0);
> > +                     }
> > +                     xcsi2rxss_stop_stream(xcsi2rxss);
> > +             }
> > +     }
> > +
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +     return ret;
> > +}
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__xcsi2rxss_get_pad_format(struct xcsi2rxss_state *xcsi2rxss,
> > +                        struct v4l2_subdev_pad_config *cfg,
> > +                        unsigned int pad, u32 which)
> > +{
> > +     switch (which) {
> > +     case V4L2_SUBDEV_FORMAT_TRY:
> > +             return v4l2_subdev_get_try_format(&xcsi2rxss->subdev, cfg, pad);
> > +     case V4L2_SUBDEV_FORMAT_ACTIVE:
> > +             return &xcsi2rxss->format;
> > +     default:
> > +             return NULL;
> > +     }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_get_format - Get the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to get the pad format information.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_get_format(struct v4l2_subdev *sd,
> > +                             struct v4l2_subdev_pad_config *cfg,
> > +                             struct v4l2_subdev_format *fmt)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > +     mutex_lock(&xcsi2rxss->lock);
> > +     fmt->format = *__xcsi2rxss_get_pad_format(xcsi2rxss, cfg, fmt->pad,
> > +                                               fmt->which);
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_set_format - This is used to set the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to set the pad format. Since the pad format is fixed
> > + * in hardware, it can't be modified on run time. So when a format set is
> > + * requested by application, all parameters except the format type is saved
> > + * for the pad and the original pad format is sent back to the application.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_set_format(struct v4l2_subdev *sd,
> > +                             struct v4l2_subdev_pad_config *cfg,
> > +                             struct v4l2_subdev_format *fmt)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +     struct v4l2_mbus_framefmt *__format;
> > +     u32 code;
> > +
> > +     /* only sink pad format can be updated */
> > +     mutex_lock(&xcsi2rxss->lock);
> > +
> > +     /*
> > +      * Only the format->code parameter matters for CSI as the
> > +      * CSI format cannot be changed at runtime.
> > +      * Ensure that format to set is copied to over to CSI pad format
> > +      */
> > +     __format = __xcsi2rxss_get_pad_format(xcsi2rxss, cfg,
> > +                                           fmt->pad, fmt->which);
> > +
> > +     /* Save the pad format code */
> > +     code = __format->code;
> > +
> > +     /*
> > +      * RAW8 is supported in all datatypes. So if requested media bus format
> > +      * is of RAW8 type, then allow to be set. In case core is configured to
> > +      * other RAW, YUV422 8/10 or RGB888, set appropriate media bus
> format.
> > +      */
> > +     if ((fmt->format.code == MEDIA_BUS_FMT_SBGGR8_1X8 ||
> > +          fmt->format.code == MEDIA_BUS_FMT_SGBRG8_1X8 ||
> > +          fmt->format.code == MEDIA_BUS_FMT_SGRBG8_1X8 ||
> > +          fmt->format.code == MEDIA_BUS_FMT_SRGGB8_1X8) ||
> > +         (core->datatype == XCSI_DT_RAW10 &&
> > +          (fmt->format.code == MEDIA_BUS_FMT_SBGGR10_1X10 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGBRG10_1X10 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGRBG10_1X10 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SRGGB10_1X10)) ||
> > +         (core->datatype == XCSI_DT_RAW12 &&
> > +          (fmt->format.code == MEDIA_BUS_FMT_SBGGR12_1X12 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGBRG12_1X12 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGRBG12_1X12 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SRGGB12_1X12)) ||
> > +         (core->datatype == XCSI_DT_RAW14 &&
> > +          (fmt->format.code == MEDIA_BUS_FMT_SBGGR14_1X14 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGBRG14_1X14 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGRBG14_1X14 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SRGGB14_1X14)) ||
> > +         (core->datatype == XCSI_DT_RAW16 &&
> > +          (fmt->format.code == MEDIA_BUS_FMT_SBGGR16_1X16 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGBRG16_1X16 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SGRBG16_1X16 ||
> > +           fmt->format.code == MEDIA_BUS_FMT_SRGGB16_1X16)) ||
> > +         (core->datatype == XCSI_DT_YUV4228B &&
> > +          fmt->format.code == MEDIA_BUS_FMT_UYVY8_1X16) ||
> > +         (core->datatype == XCSI_DT_YUV42210B &&
> > +          fmt->format.code == MEDIA_BUS_FMT_UYVY10_1X20) ||
> > +         (core->datatype == XCSI_DT_RGB888 &&
> > +          fmt->format.code == MEDIA_BUS_FMT_RBG888_1X24)) {
> > +             /* Copy over the format to be set */
> > +             *__format = fmt->format;
> > +     } else {
> > +             /* Restore the original pad format code */
> > +             fmt->format.code = code;
> > +             __format->code = code;
> > +             __format->width = fmt->format.width;
> > +             __format->height = fmt->format.height;
> > +     }
> > +
> > +     mutex_unlock(&xcsi2rxss->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_open - Called on v4l2_open()
> > + * @sd: Pointer to V4L2 sub device structure
> > + * @fh: Pointer to V4L2 File handle
> > + *
> > + * This function is called on v4l2_open(). It sets the default format
> > + * for both pads.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_open(struct v4l2_subdev *sd,
> > +                       struct v4l2_subdev_fh *fh)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +     struct v4l2_mbus_framefmt *format;
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < XCSI_MEDIA_PADS; i++) {
> > +             format = v4l2_subdev_get_try_format(sd, fh->pad, i);
> > +             *format = xcsi2rxss->format;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media Operations
> > + */
> > +
> > +static const struct media_entity_operations xcsi2rxss_media_ops = {
> > +     .link_validate = v4l2_subdev_link_validate
> > +};
> > +
> > +static const struct v4l2_ctrl_ops xcsi2rxss_ctrl_ops = {
> > +     .s_ctrl = xcsi2rxss_s_ctrl
> > +};
> > +
> > +static struct v4l2_ctrl_config xcsi2rxss_ctrls[] = {
> > +     {
> > +             .ops    = &xcsi2rxss_ctrl_ops,
> > +             .id     = V4L2_CID_XILINX_MIPICSISS_ACT_LANES,
> > +             .name   = "Active Lanes",
> > +             .type   = V4L2_CTRL_TYPE_INTEGER,
> > +             .min    = 1,
> > +             .max    = 4,
> > +             .step   = 1,
> > +             .def    = 1,
> > +     }, {
> > +             .ops    = &xcsi2rxss_ctrl_ops,
> > +             .id     = V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS,
> > +             .name   = "Reset Counters",
> > +             .type   = V4L2_CTRL_TYPE_BUTTON,
> > +             .min    = 0,
> > +             .max    = 1,
> > +             .step   = 1,
> > +             .def    = 0,
> > +             .flags  = V4L2_CTRL_FLAG_WRITE_ONLY,
> > +     }
> > +};
> > +
> > +static const struct v4l2_subdev_core_ops xcsi2rxss_core_ops = {
> > +     .log_status = xcsi2rxss_log_status,
> > +     .subscribe_event = xcsi2rxss_subscribe_event,
> > +     .unsubscribe_event = xcsi2rxss_unsubscribe_event
> > +};
> > +
> > +static struct v4l2_subdev_video_ops xcsi2rxss_video_ops = {
> > +     .s_stream = xcsi2rxss_s_stream
> > +};
> > +
> > +static struct v4l2_subdev_pad_ops xcsi2rxss_pad_ops = {
> > +     .get_fmt = xcsi2rxss_get_format,
> > +     .set_fmt = xcsi2rxss_set_format,
> > +};
> > +
> > +static struct v4l2_subdev_ops xcsi2rxss_ops = {
> > +     .core = &xcsi2rxss_core_ops,
> > +     .video = &xcsi2rxss_video_ops,
> > +     .pad = &xcsi2rxss_pad_ops
> > +};
> > +
> > +static const struct v4l2_subdev_internal_ops xcsi2rxss_internal_ops = {
> > +     .open = xcsi2rxss_open,
> > +};
> > +
> > +static void xcsi2rxss_set_default_format(struct xcsi2rxss_state *state)
> > +{
> > +     struct xcsi2rxss_core *core = &state->core;
> > +
> > +     memset(&state->format, 0, sizeof(state->format));
> > +
> > +     switch (core->datatype) {
> > +     case XCSI_DT_YUV4228B:
> > +             state->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
> > +             break;
> > +     case XCSI_DT_RGB888:
> > +             state->format.code = MEDIA_BUS_FMT_RBG888_1X24;
> > +             break;
> > +     case XCSI_DT_YUV42210B:
> > +             state->format.code = MEDIA_BUS_FMT_UYVY10_1X20;
> > +             break;
> > +     case XCSI_DT_RAW10:
> > +             state->format.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +             break;
> > +     case XCSI_DT_RAW12:
> > +             state->format.code = MEDIA_BUS_FMT_SRGGB12_1X12;
> > +             break;
> > +     case XCSI_DT_RAW14:
> > +             state->format.code = MEDIA_BUS_FMT_SRGGB14_1X14;
> > +             break;
> > +     case XCSI_DT_RAW16:
> > +             state->format.code = MEDIA_BUS_FMT_SRGGB16_1X16;
> > +             break;
> > +     case XCSI_DT_RAW8:
> > +     case XCSI_DT_RGB444:
> > +     case XCSI_DT_RGB555:
> > +     case XCSI_DT_RGB565:
> > +     case XCSI_DT_RGB666:
> > +             state->format.code = MEDIA_BUS_FMT_SRGGB8_1X8;
> > +             break;
> > +     }
> > +
> > +     state->format.field = V4L2_FIELD_NONE;
> > +     state->format.colorspace = V4L2_COLORSPACE_SRGB;
> > +     state->format.width = XCSI_DEFAULT_WIDTH;
> > +     state->format.height = XCSI_DEFAULT_HEIGHT;
> > +
> > +     dev_dbg(core->dev, "default mediabus format = 0x%x",
> > +             state->format.code);
> > +}
> > +
> > +static int xcsi2rxss_parse_of(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > +     struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +     struct device_node *node = xcsi2rxss->core.dev->of_node;
> > +     struct device_node *ports = NULL;
> > +     struct device_node *port = NULL;
> > +     unsigned int nports, irq;
> > +     bool en_csi_v20, vfb;
> > +     int ret;
> > +
> > +     en_csi_v20 = of_property_read_bool(node, "xlnx,en-csi-v2-0");
> > +     if (en_csi_v20)
> > +             core->en_vcx = of_property_read_bool(node, "xlnx,en-vcx");
> > +
> > +     core->enable_active_lanes =
> > +             of_property_read_bool(node, "xlnx,en-active-lanes");
> > +
> > +     ret = of_property_read_u32(node, "xlnx,csi-pxl-format",
> > +                                &core->datatype);
> > +     if (ret < 0) {
> > +             dev_err(core->dev, "missing xlnx,csi-pxl-format property\n");
> > +             return ret;
> > +     }
> > +
> > +     switch (core->datatype) {
> > +     case XCSI_DT_YUV4228B:
> > +     case XCSI_DT_RGB444:
> > +     case XCSI_DT_RGB555:
> > +     case XCSI_DT_RGB565:
> > +     case XCSI_DT_RGB666:
> > +     case XCSI_DT_RGB888:
> > +     case XCSI_DT_RAW6:
> > +     case XCSI_DT_RAW7:
> > +     case XCSI_DT_RAW8:
> > +     case XCSI_DT_RAW10:
> > +     case XCSI_DT_RAW12:
> > +     case XCSI_DT_RAW14:
> > +             break;
> > +     case XCSI_DT_YUV42210B:
> > +     case XCSI_DT_RAW16:
> > +     case XCSI_DT_RAW20:
> > +             if (!en_csi_v20) {
> > +                     ret = -EINVAL;
> > +                     dev_dbg(core->dev, "enable csi v2 for this pixel format");
> > +             }
> > +             break;
> > +     default:
> > +             ret = -EINVAL;
> > +     }
> > +     if (ret < 0) {
> > +             dev_err(core->dev, "invalid csi-pxl-format property!\n");
> > +             return ret;
> > +     }
> > +
> > +     vfb = of_property_read_bool(node, "xlnx,vfb");
> > +     if (!vfb) {
> > +             dev_err(core->dev, "failed as VFB is disabled!\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     ports = of_get_child_by_name(node, "ports");
> > +     if (!ports)
> > +             ports = node;
> > +
> > +     nports = 0;
> > +     for_each_child_of_node(ports, port) {
> > +             struct device_node *endpoint;
> > +             struct v4l2_fwnode_endpoint v4lendpoint;
> > +             int ret;
> > +
> > +             if (!port->name || of_node_cmp(port->name, "port"))
> > +                     continue;
> > +
> > +             endpoint = of_get_next_child(port, NULL);
> > +             if (!endpoint) {
> > +                     dev_err(core->dev, "No port at\n");
> > +                     return -EINVAL;
> > +             }
> > +
> > +             /*
> > +              * since first port is sink port and it contains
> > +              * all info about data-lanes and cfa-pattern,
> > +              * don't parse second port but only check if exists
> > +              */
> > +             if (nports == XVIP_PAD_SOURCE) {
> > +                     dev_dbg(core->dev, "no need to parse source port");
> > +                     nports++;
> > +                     of_node_put(endpoint);
> > +                     continue;
> > +             }
> > +
> > +             ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint),
> > +                                              &v4lendpoint);
> > +             of_node_put(endpoint);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             dev_dbg(core->dev, "%s : port %d bus type = %d\n",
> > +                     __func__, nports, v4lendpoint.bus_type);
> > +
> > +             if (v4lendpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
> > +                     dev_dbg(core->dev, "%s : base.port = %d base.id = %d\n",
> > +                             __func__, v4lendpoint.base.port,
> > +                             v4lendpoint.base.id);
> > +
> > +                     dev_dbg(core->dev, "%s : mipi number lanes = %d\n",
> > +                             __func__,
> > +                             v4lendpoint.bus.mipi_csi2.num_data_lanes);
> > +
> > +                     core->max_num_lanes =
> > +                             v4lendpoint.bus.mipi_csi2.num_data_lanes;
> > +             }
> > +
> > +             /* Count the number of ports. */
> > +             nports++;
> > +     }
> > +
> > +     if (nports != XCSI_MEDIA_PADS) {
> > +             dev_err(core->dev, "invalid number of ports %u\n", nports);
> > +             return -EINVAL;
> > +     }
> > +
> > +     /* Register interrupt handler */
> > +     irq = irq_of_parse_and_map(node, 0);
> > +     ret = devm_request_irq(core->dev, irq, xcsi2rxss_irq_handler,
> > +                            IRQF_SHARED, "xilinx-csi2rxss", xcsi2rxss);
> > +     if (ret) {
> > +             dev_err(core->dev, "Err = %d Interrupt handler reg failed!\n",
> > +                     ret);
> > +             return ret;
> > +     }
> > +
> > +     xcsi2rxss_log_ipconfig(xcsi2rxss);
> > +
> > +     return 0;
> > +}
> > +
> > +static int xcsi2rxss_probe(struct platform_device *pdev)
> > +{
> > +     struct v4l2_subdev *subdev;
> > +     struct xcsi2rxss_state *xcsi2rxss;
> > +     struct xcsi2rxss_core *core;
> > +     struct resource *res;
> > +     int ret, num_ctrls, i;
> > +
> > +     xcsi2rxss = devm_kzalloc(&pdev->dev, sizeof(*xcsi2rxss), GFP_KERNEL);
> > +     if (!xcsi2rxss)
> > +             return -ENOMEM;
> > +
> > +     core = &xcsi2rxss->core;
> > +     core->dev = &pdev->dev;
> > +
> > +     core->clks = devm_kmemdup(core->dev, xcsi2rxss_clks,
> > +                               sizeof(xcsi2rxss_clks), GFP_KERNEL);
> > +     if (!core->clks)
> > +             return -ENOMEM;
> > +
> > +     /* Reset GPIO */
> > +     core->rst_gpio = devm_gpiod_get_optional(core->dev, "reset",
> > +                                              GPIOD_OUT_HIGH);
> > +     if (IS_ERR(core->rst_gpio)) {
> > +             if (PTR_ERR(core->rst_gpio) != -EPROBE_DEFER)
> > +                     dev_err(core->dev, "Video Reset GPIO not setup in DT");
> > +             return PTR_ERR(core->rst_gpio);
> > +     }
> > +
> > +     mutex_init(&xcsi2rxss->lock);
> > +
> > +     ret = xcsi2rxss_parse_of(xcsi2rxss);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +     core->iomem = devm_ioremap_resource(core->dev, res);
> > +     if (IS_ERR(core->iomem))
> > +             return PTR_ERR(core->iomem);
> > +
> > +     core->num_clks = ARRAY_SIZE(xcsi2rxss_clks);
> > +
> > +     ret = clk_bulk_get(core->dev, core->num_clks, core->clks);
> > +     if (ret)
> > +             return ret;
> > +
> > +     ret = clk_bulk_prepare_enable(core->num_clks, core->clks);
> > +     if (ret)
> > +             goto err_clk_put;
> > +
> > +     if (xcsi2rxss->core.rst_gpio) {
> > +             gpiod_set_value_cansleep(xcsi2rxss->core.rst_gpio, 1);
> > +             /* minimum of 40 dphy_clk_200M cycles */
> > +             usleep_range(1, 2);
> > +             gpiod_set_value_cansleep(xcsi2rxss->core.rst_gpio, 0);
> > +     }
> > +
> > +     xcsi2rxss_reset(core);
> > +
> > +     core->events = (struct xcsi2rxss_event *)&xcsi2rxss_events;
> > +
> > +     if (core->en_vcx) {
> > +             u32 alloc_size;
> > +
> > +             alloc_size = sizeof(struct xcsi2rxss_event) *
> > +                          XCSI_VCX_NUM_EVENTS;
> > +             core->vcx_events = devm_kzalloc(&pdev->dev, alloc_size,
> > +                                             GFP_KERNEL);
> > +             if (!core->vcx_events) {
> > +                     mutex_destroy(&xcsi2rxss->lock);
> > +                     ret = -ENOMEM;
> > +                     goto err_clk_disable;
> > +             }
> > +
> > +             for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++)
> > +                     core->vcx_events[i].mask = 1 << i;
> > +     }
> > +
> > +     /* Initialize V4L2 subdevice and media entity */
> > +     xcsi2rxss->pads[XVIP_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> > +     xcsi2rxss->pads[XVIP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > +
> > +     /* Initialize the default format */
> > +     xcsi2rxss_set_default_format(xcsi2rxss);
> > +
> > +     /* Initialize V4L2 subdevice and media entity */
> > +     subdev = &xcsi2rxss->subdev;
> > +     v4l2_subdev_init(subdev, &xcsi2rxss_ops);
> > +     subdev->dev = &pdev->dev;
> > +     subdev->internal_ops = &xcsi2rxss_internal_ops;
> > +     strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
> 
> Use strscpy.
> 

Noted. I will update in next verison.

> > +     subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS |
> V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +     subdev->entity.ops = &xcsi2rxss_media_ops;
> > +     v4l2_set_subdevdata(subdev, xcsi2rxss);
> > +
> > +     ret = media_entity_pads_init(&subdev->entity, XCSI_MEDIA_PADS,
> > +                                  xcsi2rxss->pads);
> > +     if (ret < 0)
> > +             goto error;
> > +
> > +     /*
> > +      * In case the Enable Active Lanes config parameter is not set,
> > +      * dynamic lane reconfiguration is not allowed.
> > +      * So V4L2_CID_XILINX_MIPICSISS_ACT_LANES ctrl will not be registered.
> > +      * Accordingly allocate the number of controls
> > +      */
> > +     num_ctrls = ARRAY_SIZE(xcsi2rxss_ctrls);
> > +
> > +     if (!core->enable_active_lanes)
> > +             num_ctrls--;
> > +
> > +     v4l2_ctrl_handler_init(&xcsi2rxss->ctrl_handler, num_ctrls);
> > +     for (i = 0; i < ARRAY_SIZE(xcsi2rxss_ctrls); i++) {
> > +             struct v4l2_ctrl *ctrl;
> > +
> > +             if (xcsi2rxss_ctrls[i].id ==
> > +                     V4L2_CID_XILINX_MIPICSISS_ACT_LANES) {
> > +                     if (!core->enable_active_lanes) {
> > +                             /* Don't register control */
> > +                             dev_dbg(core->dev,
> > +                                     "Skip active lane control\n");
> > +                             continue;
> > +                     }
> > +                     xcsi2rxss_ctrls[i].max = core->max_num_lanes;
> > +                     xcsi2rxss_ctrls[i].def = core->max_num_lanes;
> > +             }
> > +
> > +             dev_dbg(core->dev, "%d ctrl = 0x%x\n", i,
> > +                     xcsi2rxss_ctrls[i].id);
> > +             ctrl = v4l2_ctrl_new_custom(&xcsi2rxss->ctrl_handler,
> > +                                         &xcsi2rxss_ctrls[i], NULL);
> > +             if (!ctrl) {
> > +                     dev_err(core->dev, "Failed for %s ctrl\n",
> > +                             xcsi2rxss_ctrls[i].name);
> > +                     goto error;
> > +             }
> > +     }
> > +
> > +     if (xcsi2rxss->ctrl_handler.error) {
> > +             dev_err(core->dev, "failed to add controls\n");
> > +             ret = xcsi2rxss->ctrl_handler.error;
> > +             goto error;
> > +     }
> > +
> > +     subdev->ctrl_handler = &xcsi2rxss->ctrl_handler;
> > +     ret = v4l2_ctrl_handler_setup(&xcsi2rxss->ctrl_handler);
> > +     if (ret < 0) {
> > +             dev_err(core->dev, "failed to set controls\n");
> > +             goto error;
> > +     }
> > +
> > +     platform_set_drvdata(pdev, xcsi2rxss);
> > +
> > +     ret = v4l2_async_register_subdev(subdev);
> > +     if (ret < 0) {
> > +             dev_err(core->dev, "failed to register subdev\n");
> > +             goto error;
> > +     }
> > +
> > +     dev_info(core->dev, "Xilinx CSI2 Rx Subsystem device found!\n");
> > +
> > +     return 0;
> > +error:
> > +     v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > +     media_entity_cleanup(&subdev->entity);
> > +     mutex_destroy(&xcsi2rxss->lock);
> > +err_clk_disable:
> > +     clk_bulk_disable_unprepare(core->num_clks, core->clks);
> > +err_clk_put:
> > +     clk_bulk_put(core->num_clks, core->clks);
> > +     return ret;
> > +}
> > +
> > +static int xcsi2rxss_remove(struct platform_device *pdev)
> > +{
> > +     struct xcsi2rxss_state *xcsi2rxss = platform_get_drvdata(pdev);
> > +     struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +     struct v4l2_subdev *subdev = &xcsi2rxss->subdev;
> > +
> > +     v4l2_async_unregister_subdev(subdev);
> > +     v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > +     media_entity_cleanup(&subdev->entity);
> > +     mutex_destroy(&xcsi2rxss->lock);
> > +     clk_bulk_disable_unprepare(core->num_clks, core->clks);
> > +     clk_bulk_put(core->num_clks, core->clks);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id xcsi2rxss_of_id_table[] = {
> > +     { .compatible = "xlnx,mipi-csi2-rx-subsystem-4.0",},
> > +     { }
> > +};
> > +MODULE_DEVICE_TABLE(of, xcsi2rxss_of_id_table);
> > +
> > +static struct platform_driver xcsi2rxss_driver = {
> > +     .driver = {
> > +             .name           = "xilinx-csi2rxss",
> > +             .of_match_table = xcsi2rxss_of_id_table,
> > +     },
> > +     .probe                  = xcsi2rxss_probe,
> > +     .remove                 = xcsi2rxss_remove,
> > +};
> > +
> > +module_platform_driver(xcsi2rxss_driver);
> > +
> > +MODULE_AUTHOR("Vishal Sagar <vsagar@...inx.com>");
> > +MODULE_DESCRIPTION("Xilinx MIPI CSI2 Rx Subsystem Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/uapi/linux/xilinx-v4l2-controls.h
> b/include/uapi/linux/xilinx-v4l2-controls.h
> > index b6441fe..f023623 100644
> > --- a/include/uapi/linux/xilinx-v4l2-controls.h
> > +++ b/include/uapi/linux/xilinx-v4l2-controls.h
> > @@ -71,4 +71,16 @@
> >  /* Noise level */
> >  #define V4L2_CID_XILINX_TPG_NOISE_GAIN               (V4L2_CID_XILINX_TPG
> + 17)
> >
> > +/*
> > + * Xilinx MIPI CSI2 Rx Subsystem
> > + */
> > +
> > +/* Base ID */
> > +#define V4L2_CID_XILINX_MIPICSISS            (V4L2_CID_USER_BASE + 0xc080)
> 
> For private controls you need to reserve a range in include/uapi/linux/v4l2-
> controls.h.
> See e.g. V4L2_CID_USER_IMX_BASE.
> 

I had followed how this was done for V4L2_CID_XILINX_TPG.
I will change it in next version.

> > +
> > +/* Active Lanes */
> > +#define V4L2_CID_XILINX_MIPICSISS_ACT_LANES
> (V4L2_CID_XILINX_MIPICSISS + 1)
> > +/* Reset all event counters */
> > +#define V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS
> (V4L2_CID_XILINX_MIPICSISS + 2)
> 
> Please improve a bit on the documentation of the controls. What are they
> used for, when can you use them? I.e. I suspect changing active lanes while
> streaming is probably a bad idea (and do you check for that?).
> 
> This is the only documentation there will be for these controls, so keep
> in mind the poor end-user who has to understand how to use them.
> 

I will add more documentation about these controls.

> > +
> >  #endif /* __UAPI_XILINX_V4L2_CONTROLS_H__ */
> > diff --git a/include/uapi/linux/xilinx-v4l2-events.h b/include/uapi/linux/xilinx-
> v4l2-events.h
> > new file mode 100644
> > index 0000000..2aa357c
> > --- /dev/null
> > +++ b/include/uapi/linux/xilinx-v4l2-events.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Xilinx V4L2 Events
> > + *
> > + * Copyright (C) 2019 Xilinx, Inc.
> > + *
> > + * Contacts: Vishal Sagar <vishal.sagar@...inx.com>
> > + *
> > + */
> > +
> > +#ifndef __UAPI_XILINX_V4L2_EVENTS_H__
> > +#define __UAPI_XILINX_V4L2_EVENTS_H__
> > +
> > +#include <linux/videodev2.h>
> > +
> > +/* Xilinx CSI2 Receiver events */
> > +#define V4L2_EVENT_XLNXCSIRX_CLASS   (V4L2_EVENT_PRIVATE_START |
> 0x100)
> 
> Ugly prefix. V4L2_EVENT_XILINX_CSIRX_CLASS looks much better.
> 

Ok I will update the name to use V4L2_EVENT_XILINX_CSIRX_CLASS.

> Also use 0x200 instead of 0x100. 0x100 is already in use by omap3.
> 

Noted.

> > +/* Stream Line Buffer full */
> > +#define V4L2_EVENT_XLNXCSIRX_SLBF    (V4L2_EVENT_XLNXCSIRX_CLASS |
> 0x1)
> 
> This needs to be documented a lot better: what does the event mean? what
> should userspace do if this event arrives?
> 

Noted. I will document this better in next version.

> > +
> > +#endif /* __UAPI_XILINX_V4L2_EVENTS_H__ */
> >
> 
> I would probably also combine these two public headers into one:
> 
> include/uapi/linux/xilinx-csi2rxss.h
> 
> It's overkill IMHO to have two headers for this.
> 

Ok I will consolidate it into a single xilinx-csi2rxss.h header file.

> Regards,
> 
>         Hans

Regards
Vishal Sagar

Powered by blists - more mailing lists