| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a786a889-7414-8cb9-7618-67fa1adf705d@ti.com>
Date: Fri, 7 Jun 2019 15:58:44 -0500
From: Suman Anna <s-anna@...com>
To: Nishanth Menon <nm@...com>, Arnd Bergmann <arnd@...db.de>,
Olof Johansson <olof@...om.net>,
Santosh Shilimkar <ssantosh@...nel.org>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>
CC: <linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
Tero Kristo <t-kristo@...com>
Subject: Re: [PATCH 3/6] arm64: dts: ti: Add Support for J721E SoC
Hi Nishanth, Tero,
On 5/22/19 11:19 AM, Nishanth Menon wrote:
> The J721E SoC belongs to the K3 Multicore SoC architecture platform,
> providing advanced system integration to enable lower system costs
> of automotive applications such as infotainment, cluster, premium
> Audio, Gateway, industrial and a range of broad market applications.
> This SoC is designed around reducing the system cost by eliminating
> the need of an external system MCU and is targeted towards ASIL-B/C
> certification/requirements in addition to allowing complex software
> and system use-cases.
>
> Some highlights of this SoC are:
> * Dual Cortex-A72s in a single cluster, three clusters of lockstep
> capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
> C7x floating point Vector DSP, Two C66x floating point DSPs.
> * 3D GPU PowerVR Rogue 8XE GE8430
> * Vision Processing Accelerator (VPAC) with image signal processor and Depth
> and Motion Processing Accelerator (DMPAC)
> * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
> PRUs and dual RTUs
> * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
> up to two DPI interfaces.
> * Integrated Ethernet switch supporting up to a total of 8 external ports in
> addition to legacy Ethernet switch of up to 2 ports.
> * System MMU (SMMU) Version 3.0 and advanced virtualisation
> capabilities.
> * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
> 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
> I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
> * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
> management.
> * Configurable L3 Cache and IO-coherent architecture with high data throughput
> capable distributed DMA architecture under NAVSS
> * Centralized System Controller for Security, Power, and Resource
> Management (DMSC)
>
> See J721E Technical Reference Manual (SPRUIL1, May 2019)
> for further details: http://www.ti.com/lit/pdf/spruil1
>
> Signed-off-by: Nishanth Menon <nm@...com>
> ---
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++
> .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++
> arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++
> 3 files changed, 450 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> new file mode 100644
> index 000000000000..d42912044a5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +&cbass_main {
> + msmc_ram: sram@...00000 {
> + compatible = "mmio-sram";
> + reg = <0x0 0x70000000 0x0 0x800000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x70000000 0x800000>;
> +
> + atf-sram@0 {
> + reg = <0x0 0x20000>;
> + };
> + };
> +
> + gic500: interrupt-controller@...0000 {
> + compatible = "arm,gic-v3";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
> + <0x00 0x01900000 0x00 0x100000>; /* GICR */
> +
> + /* vcpumntirq: virtual CPU interface maintenance interrupt */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gic_its: gic-its@...00000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x00 0x01820000 0x00 0x10000>;
> + socionext,synquacer-pre-its = <0x1000000 0x400000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + smmu0: smmu@...00000 {
> + compatible = "arm,smmu-v3";
> + reg = <0x0 0x36600000 0x0 0x100000>;
> + interrupt-parent = <&gic500>;
> + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "eventq", "gerror";
> + #iommu-cells = <1>;
> + };
> +
> + secure_proxy_main: mailbox@...00000 {
> + compatible = "ti,am654-secure-proxy";
> + #mbox-cells = <1>;
> + reg-names = "target_data", "rt", "scfg";
> + reg = <0x00 0x32c00000 0x00 0x100000>,
> + <0x00 0x32400000 0x00 0x100000>,
> + <0x00 0x32800000 0x00 0x100000>;
> + interrupt-names = "rx_011";
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + main_pmx0: pinmux@...000 {
> + compatible = "pinctrl-single";
> + /* Proxy 0 addressing */
> + reg = <0x0 0x11c000 0x0 0x2b4>;
> + #pinctrl-cells = <1>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0xffffffff>;
> + };
> +
> + main_uart0: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02800000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 146>;
> + clocks = <&k3_clks 146 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart1: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02810000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 278>;
> + clocks = <&k3_clks 278 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart2: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02820000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 279>;
> + clocks = <&k3_clks 279 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart3: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02830000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 280>;
> + clocks = <&k3_clks 280 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart4: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02840000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 281>;
> + clocks = <&k3_clks 281 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart5: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02850000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 282>;
> + clocks = <&k3_clks 282 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart6: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02860000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 283>;
> + clocks = <&k3_clks 283 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart7: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02870000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 284>;
> + clocks = <&k3_clks 284 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart8: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02880000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 285>;
> + clocks = <&k3_clks 285 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart9: serial@...0000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x02890000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 286>;
> + clocks = <&k3_clks 286 0>;
> + clock-names = "fclk";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> new file mode 100644
> index 000000000000..b72e033fa159
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +&cbass_mcu_wakeup {
> + dmsc: dmsc@...83000 {
> + compatible = "ti,k2g-sci";
> + ti,host-id = <12>;
> +
> + mbox-names = "rx", "tx";
> +
> + mboxes= <&secure_proxy_main 11>,
> + <&secure_proxy_main 13>;
> +
> + reg-names = "debug_messages";
> + reg = <0x00 0x44083000 0x0 0x1000>;
> +
> + k3_pds: power-controller {
> + compatible = "ti,sci-pm-domain";
> + #power-domain-cells = <1>;
> + };
> +
> + k3_clks: clocks {
> + compatible = "ti,k2g-sci-clk";
> + #clock-cells = <2>;
> + ti,scan-clocks-from-dt;
> + };
> +
> + k3_reset: reset-controller {
> + compatible = "ti,sci-reset";
> + #reset-cells = <2>;
> + };
> + };
> +
> + wkup_pmx0: pinmux@...1c000 {
> + compatible = "pinctrl-single";
> + /* Proxy 0 addressing */
> + reg = <0x00 0x4301c000 0x00 0x178>;
> + #pinctrl-cells = <1>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0xffffffff>;
> + };
> +
> + wkup_uart0: serial@...00000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x42300000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 287>;
> + clocks = <&k3_clks 287 0>;
> + clock-names = "fclk";
> + };
> +
> + mcu_uart0: serial@...00000 {
> + compatible = "ti,j721e-uart", "ti,am654-uart";
> + reg = <0x00 0x40a00000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <96000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 149>;
> + clocks = <&k3_clks 149 0>;
> + clock-names = "fclk";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
> new file mode 100644
> index 000000000000..e7c366c98ce1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/k3.h>
> +
> +/ {
> + model = "Texas Instruments K3 J721E SoC";
> + compatible = "ti,j721e";
> + interrupt-parent = <&gic500>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &wkup_uart0;
> + serial1 = &mcu_uart0;
> + serial2 = &main_uart0;
> + serial3 = &main_uart1;
> + serial4 = &main_uart2;
> + serial5 = &main_uart3;
> + serial6 = &main_uart4;
> + serial7 = &main_uart5;
> + serial8 = &main_uart6;
> + serial9 = &main_uart7;
> + serial10 = &main_uart8;
> + serial11 = &main_uart9;
> + };
> +
> + chosen { };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu-map {
> + cluster0: cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> +
> + core1 {
> + cpu = <&cpu1>;
> + };
> + };
> +
> + };
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a72";
> + reg = <0x000>;
> + device_type = "cpu";
> + enable-method = "psci";
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpu1: cpu@1 {
> + compatible = "arm,cortex-a72";
> + reg = <0x001>;
> + device_type = "cpu";
> + enable-method = "psci";
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&L2_0>;
> + };
> + };
> +
> + L2_0: l2-cache0 {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <2048>;
> + next-level-cache = <&msmc_l3>;
> + };
> +
> + msmc_l3: l3-cache0 {
> + compatible = "cache";
> + cache-level = <3>;
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> +
> + psci: psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> + };
> +
> + a72_timer0: timer-cl0-cpu0 {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
> + };
> +
> + pmu: pmu {
> + compatible = "arm,armv8-pmuv3";
> + /* Recommendation from GIC500 TRM Table A.3 */
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + cbass_main: interconnect@...000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
> + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
> + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
> + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
> + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
> + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
> + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
> + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
> + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
> + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
> + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
> + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
> + /* MCUSS_WKUP Range */
> + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
> + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
> + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
> + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
> + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
> + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
> + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
> + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
> + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
> + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
> + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
> + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>,
minor nit, can we have this MSMC RAM range line moved to before the
MCUSS_WKUP comment since it doesn't belong to the MCUSS range. Perhaps
can be fixed up while applying the patch.
Other than that, everything looks good.
Reviewed-by: Suman Anna <s-anna@...com>
regards
Suman
> + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
> + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
> +
> + cbass_mcu_wakeup: interconnect@...80000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
> + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
> + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
> + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
> + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
> + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
> + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
> + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
> + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
> + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
> + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
> + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
> + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
> + };
> + };
> +};
> +
> +/* Now include the peripherals for each bus segments */
> +#include "k3-j721e-main.dtsi"
> +#include "k3-j721e-mcu-wakeup.dtsi"
>
Powered by blists - more mailing lists