| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 7 Jun 2019 21:11:55 +0800
From: Yang Weijiang <weijiang.yang@...el.com>
To: Jidong Xiao <jidong.xiao@...il.com>
Cc: Yang Weijiang <weijiang.yang@...el.com>, KVM <kvm@...r.kernel.org>,
Kernel development list <linux-kernel@...r.kernel.org>,
Paolo Bonzini <pbonzini@...hat.com>, mst@...hat.com,
rkrcmar@...hat.com, jmattson@...gle.com, yu.c.zhang@...el.com
Subject: Re: [PATCH v3 1/9] Documentation: Introduce EPT based Subpage
Protection
On Thu, Jun 06, 2019 at 09:57:00PM -0600, Jidong Xiao wrote:
> Hi, Weijiang,
>
> Does this require some specific Intel processors or is it supported by
> older processors as well?
>
> -Jidong
Hi, Jidong,
SPP is a feature on new platforms, so only available with new
Intel processors.
>
> On Thu, Jun 6, 2019 at 9:33 AM Yang Weijiang <weijiang.yang@...el.com> wrote:
> >
> > Signed-off-by: Yang Weijiang <weijiang.yang@...el.com>
> > ---
> > Documentation/virtual/kvm/spp_kvm.txt | 216 ++++++++++++++++++++++++++
> > 1 file changed, 216 insertions(+)
> > create mode 100644 Documentation/virtual/kvm/spp_kvm.txt
> >
> > diff --git a/Documentation/virtual/kvm/spp_kvm.txt b/Documentation/virtual/kvm/spp_kvm.txt
> > new file mode 100644
> > index 000000000000..4b5edcaf48b6
> > --- /dev/null
> > +++ b/Documentation/virtual/kvm/spp_kvm.txt
> > @@ -0,0 +1,216 @@
> > +EPT-Based Sub-Page Protection (SPP) for KVM
> > +=============================================
> > +
> > +1. Overview
> > +
> > +EPT-based Sub-Page Protection (SPP) capability to allow Virtual Machine
> > +Monitors to specify write-protection for guest physical memory at a
> > +sub-page (128 byte) granularity. When this capability is utilized, the
> > +CPU enforces write-access permissions for sub-page regions inside 4K pages
> > +as specified by the VMI tools.
> > +
> > +2. Operation of SPP
> > +
> > +Sub-Page Protection Table (SPPT) is introduced to manage sub-page
> > +write-access.
> > +
> > +SPPT is active when:
> > +a) moddule parameter spp=on is configured for kvm-intel.ko
> > +b) large paging is disabled on host
> > +c) "sub-page write protection" VM-execution control bit is set
> > +SPPT looks up the guest physical address to seek a 64-bit
> > +bitmap indicating sub-page write permission in SPPT leaf entry.
> > +
> > +When the "sub-page write protection" VM-execution control is 1, the SPPT
> > +is used to lookup write permission bits for the 128 byte sub-page regions
> > +contained in the 4KB guest physical page. EPT specifies the 4KB page
> > +write-protection privilege whereas SPPT defines the write permissions
> > +at 128-byte granularity within one 4KB page. Write accesses
> > +prevented due to sub-page permissions induces EPT violation VM exits.
> > +Similar to EPT, a logical processor uses SPPT to lookup sub-page level
> > +write permissions for guest-physical addresses only when those addresses
> > +are used to access memory.
> > +__________________________________________________________________________
> > +
> > +How SPP hardware works:
> > +__________________________________________________________________________
> > +
> > +Guest write access --> GPA --> Walk EPT --> EPT leaf entry -----|
> > +|---------------------------------------------------------------|
> > +|-> if VMexec_control.spp && ept_leaf_entry.spp_bit (bit 61)
> > + |
> > + |-> <false> --> EPT legacy behavior
> > + |
> > + |
> > + |-> <true> --> if ept_leaf_entry.writable
> > + |
> > + |-> <true> --> Ignore SPP
> > + |
> > + |-> <false> --> GPA --> Walk SPP 4-level table--|
> > + |
> > +|------------<----------get-the-SPPT-point-from-VMCS-filed-----<------|
> > +|
> > +Walk SPP L4E table
> > +|
> > +|---> if-entry-misconfiguration ------------>-------|-------<---------|
> > + | | |
> > +else | |
> > + | | |
> > + | |------------------SPP VMexit<-----------------| |
> > + | | |
> > + | |-> exit_qualification & sppt_misconfig --> sppt misconfig |
> > + | | |
> > + | |-> exit_qualification & sppt_miss --> sppt miss |
> > + |---| |
> > + | |
> > +walk SPPT L3E--|--> if-entry-misconfiguration------------>------------|
> > + | |
> > + else |
> > + | |
> > + | |
> > + walk SPPT L2E --|--> if-entry-misconfiguration-------->-------|
> > + | |
> > + else |
> > + | |
> > + | |
> > + walk SPPT L1E --|-> if-entry-misconfiguration--->----|
> > + |
> > + else
> > + |
> > + |-> if sub-page writable
> > + |-> <true> allow, write access
> > + |-> <false> disallow, EPT violation
> > +______________________________________________________________________________
> > +
> > +3. Interfaces
> > +
> > +* Feature enabling
> > +
> > +Add "spp=on" to KVM module parameter to enable SPP feature, default is off.
> > +
> > +* Get/Set sub-page write access permission
> > +
> > +New KVM ioctl:
> > +
> > +KVM_SUBPAGES_GET_ACCESS:
> > +Get sub-pages write access bitmap corresponding to given rang of continuous gfn.
> > +
> > +KVM_SUBPAGES_SET_ACCESS
> > +Set sub-pages write access bitmap corresponding to given rang of continuous gfn.
> > +
> > +
> > +/* for KVM_SUBPAGES_GET_ACCESS and KVM_SUBPAGES_SET_ACCESS */
> > +struct kvm_subpage_info {
> > + __u64 gfn;
> > + __u64 npages; /* number of 4K pages */
> > + __u64 *access_map; /* sub-page write-access bitmap array */
> > +};
> > +
> > +#define KVM_SUBPAGES_GET_ACCESS _IOR(KVMIO, 0x49, struct kvm_subpage_info)
> > +#define KVM_SUBPAGES_SET_ACCESS _IOW(KVMIO, 0x4a, struct kvm_subpage_info)
> > +
> > +
> > +4. SPPT initialization
> > +
> > +* SPPT root page allocation
> > +
> > + SPPT is referenced via a 64-bit control field called "sub-page
> > + protection table pointer" (SPPTP, encoding 0x2030) which contains a
> > + 4K-align physical address.
> > +
> > + SPPT is a 4-level paging structure similar as EPT. When KVM
> > + loads mmu, it allocates a root page for SPPT L4 table as well.
> > +
> > +* EPT leaf entry SPP bit (bit 61)
> > +
> > + Set 0 to SPP bit to close SPP.
> > +
> > +5. Set/Get Sub-Page access bitmap for a bunch of guest physical pages
> > +
> > +* To utilize SPP feature, system admin should set sub-page access via
> > + SPP KVM ioctl `KVM_SUBPAGES_SET_ACCESS`, configuring EPT and SPPT in below flow:
> > +
> > + (1) If the target 4KB pages to be protected are there, it locates EPT leaf entries
> > + via the guest physical addresses, flags the bit 61 of the corresponding entries to
> > + enable sub-page protection for the pages, then setup SPPT paging structure.
> > + (2) otherwise, stores the [gfn,permission] mappings in KVM data structure. When
> > + EPT page-fault is generated due to target protected page accessing, it settles
> > + EPT entry configureation together with SPPT build-up.
> > +
> > + The SPPT paging structure format is as below:
> > +
> > + Format of the SPPT L4E, L3E, L2E:
> > + | Bit | Contents |
> > + | :----- | :------------------------------------------------------------------------|
> > + | 0 | Valid entry when set; indicates whether the entry is present |
> > + | 11:1 | Reserved (0) |
> > + | N-1:12 | Physical address of 4KB aligned SPPT LX-1 Table referenced by this entry |
> > + | 51:N | Reserved (0) |
> > + | 63:52 | Reserved (0) |
> > + Note: N is the physical address width supported by the processor. X is the page level
> > +
> > + Format of the SPPT L1E:
> > + | Bit | Contents |
> > + | :---- | :---------------------------------------------------------------- |
> > + | 0+2i | Write permission for i-th 128 byte sub-page region. |
> > + | 1+2i | Reserved (0). |
> > + Note: 0<=i<=31
> > +
> > +6. SPPT-induced vmexits
> > +
> > +* SPP VM exits
> > +
> > +Accesses using guest physical addresses may cause VM exits due to a SPPT
> > +misconfiguration or a SPPT missing.
> > +
> > +A SPPT misconfiguration vmexit occurs when, in the course of translating
> > +a guest physical address, the logical processor encounters a leaf EPT
> > +paging-structure entry mapping a 4KB page, with SPP enabled, during the
> > +SPPT lookup, a SPPT paging-structure entry contains an unsupported
> > +value.
> > +
> > +A SPPT missing vmexit occurs during the SPPT lookup there is no SPPT
> > +misconfiguration but any level of SPPT paging-structure entries are not
> > +present.
> > +
> > +NOTE. SPPT misconfigurations and SPPT miss can occur only due to an
> > +attempt to write memory with a guest physical address.
> > +
> > +* EPT violation vmexits due to SPPT
> > +
> > +EPT violations generated due to SPP sub-page
> > +permission are reported as EPT violation vmexits.
> > +
> > +7. SPPT-induced vmexits handling
> > +
> > +
> > +#define EXIT_REASON_SPP 66
> > +
> > +static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
> > + ...
> > + [EXIT_REASON_SPP] = handle_spp,
> > + ...
> > +};
> > +
> > +
> > +New exit qualification for SPPT-induced vmexits.
> > +
> > +| Bit | Contents |
> > +| :---- | :---------------------------------------------------------------- |
> > +| 10:0 | Reserved (0). |
> > +| 11 | SPPT VM exit type. Set for SPPT Miss, cleared for SPPT Misconfig. |
> > +| 12 | NMI unblocking due to IRET |
> > +| 63:13 | Reserved (0) |
> > +
> > +In addition to the exit qualification, Guest Linear Address and Guest
> > +Physical Address fields will be reported.
> > +
> > +* SPPT miss and misconfiguration
> > +
> > +Allocate a page for the SPPT entry and set the entry correctly.
> > +
> > +* EPT violation vmexits due to SPPT
> > +
> > +While hardware traverses SPPT, If the sub-page region write
> > +permission bit is set, the write is allowed, otherwise it's prevented
> > +and an EPT violation is generated.
> > --
> > 2.17.2
> >
Powered by blists - more mailing lists