| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 9 Jun 2019 12:53:38 +0200
From: Sam Ravnborg <sam@...nborg.org>
To: Jitao Shi <jitao.shi@...iatek.com>
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
linux-pwm@...r.kernel.org, David Airlie <airlied@...ux.ie>,
Matthias Brugger <matthias.bgg@...il.com>, stonea168@....com,
dri-devel@...ts.freedesktop.org,
Andy Yan <andy.yan@...k-chips.com>,
Ajay Kumar <ajaykumar.rs@...sung.com>,
Vincent Palatin <vpalatin@...omium.org>,
cawa.cheng@...iatek.com,
Russell King <rmk+kernel@....linux.org.uk>,
Thierry Reding <treding@...dia.com>,
devicetree@...r.kernel.org, linux-mediatek@...ts.infradead.org,
yingjoe.chen@...iatek.com, eddie.huang@...iatek.com,
linux-arm-kernel@...ts.infradead.org,
Rahul Sharma <rahul.sharma@...sung.com>,
srv_heupstream@...iatek.com, linux-kernel@...r.kernel.org,
Sascha Hauer <kernel@...gutronix.de>,
Sean Paul <seanpaul@...omium.org>
Subject: Re: [2/2] drm/panel: support for BOE tv101wum-n16 wuxga dsi video
mode panel
Hi Jitao.
Thanks for this new nice driver - a few comments follows.
Sam
On Sat, Jun 08, 2019 at 03:02:30PM +0800, Jitao Shi wrote:
> Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.
Like in the binding there is some confusion between nl6 versus n16.
Here the subject says one thing, and the changelogn another thing.
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 700 ++++++++++++++++++
> 3 files changed, 711 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index e36dbb4df867..5dad028e35f0 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -272,4 +272,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
> help
> Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
> Video Mode panel
> +
> +config DRM_PANEL_BOE_TV101WUM_NL6
> + tristate "BOE TV101WUM 1200x1920 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
> + DSI Video Mode panel
> +
New panel CONFIG symbols are added in alphabetically order.
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 78e3dc376bdd..fc5944231aa8 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
Drivers are added in alphabetically order after their CONFIG symbol.
> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> new file mode 100644
> index 000000000000..19590664c337
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> @@ -0,0 +1,700 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Jitao Shi <jitao.shi@...iatek.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drmP.h>
drmP.h is deprecated - do not use in new drivers.
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct boe_panel {
> + struct drm_panel base;
> + struct mipi_dsi_device *dsi;
> +
> + struct backlight_device *backlight;
> + struct regulator *pp1800;
> + struct regulator *avee;
> + struct regulator *avdd;
> + struct gpio_desc *enable_gpio;
> +
> + bool prepared;
> + bool enabled;
> +
> + const struct drm_display_mode *mode;
> +};
> +
> +enum dsi_cmd_type {
> + INIT_GENENIC_CMD,
> + INIT_DCS_CMD,
> + DELAY_CMD,
> +};
> +
> +struct panel_init_cmd {
> + enum dsi_cmd_type type;
> + size_t len;
> + const char *data;
> +};
> +
> +#define _INIT_CMD(...) { \
> + .type = INIT_GENENIC_CMD,\
> + .len = sizeof((char[]){__VA_ARGS__}), \
> + .data = (char[]){__VA_ARGS__} }
> +
> +#define _INIT_DCS_CMD(...) { \
> + .type = INIT_DCS_CMD, \
> + .len = sizeof((char[]){__VA_ARGS__}), \
> + .data = (char[]){__VA_ARGS__} }
> +
> +#define _INIT_DELAY_CMD(...) { \
> + .type = DELAY_CMD,\
> + .len = sizeof((char[]){__VA_ARGS__}), \
> + .data = (char[]){__VA_ARGS__} }
> +
> +static const struct panel_init_cmd boe_init_cmd[] = {
In the following there are some empty lines.
If they have any semantic purpose please add a comment.
If not, then drop the empty lines.
> + _INIT_DELAY_CMD(24),
> + _INIT_DCS_CMD(0xB0, 0x05),
> + _INIT_DCS_CMD(0xB1, 0xE5),
> + _INIT_DCS_CMD(0xB3, 0x52),
> +
> + _INIT_DCS_CMD(0xB0, 0x00),
> + _INIT_DCS_CMD(0xB3, 0x88),
> + _INIT_DCS_CMD(0xB0, 0x04),
> + _INIT_DCS_CMD(0xB8, 0x00),
> +
> + _INIT_DCS_CMD(0xB0, 0x00),
> + _INIT_DCS_CMD(0xB6, 0x03),
> + _INIT_DCS_CMD(0xBA, 0x8B),
> + _INIT_DCS_CMD(0xBF, 0x1A),
> + _INIT_DCS_CMD(0xC0, 0x0F),
> + _INIT_DCS_CMD(0xC2, 0x0C),
> + _INIT_DCS_CMD(0xC3, 0x02),
> + _INIT_DCS_CMD(0xC4, 0x0C),
> + _INIT_DCS_CMD(0xC5, 0x02),
> +
> + _INIT_DCS_CMD(0xB0, 0x01),
> + _INIT_DCS_CMD(0xE0, 0x26),
> + _INIT_DCS_CMD(0xE1, 0x26),
> + _INIT_DCS_CMD(0xDC, 0x00),
> + _INIT_DCS_CMD(0xDD, 0x00),
> + _INIT_DCS_CMD(0xCC, 0x26),
> + _INIT_DCS_CMD(0xCD, 0x26),
> + _INIT_DCS_CMD(0xC8, 0x00),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xD2, 0x03),
> + _INIT_DCS_CMD(0xD3, 0x03),
> + _INIT_DCS_CMD(0xE6, 0x04),
> + _INIT_DCS_CMD(0xE7, 0x04),
> + _INIT_DCS_CMD(0xC4, 0x09),
> + _INIT_DCS_CMD(0xC5, 0x09),
> + _INIT_DCS_CMD(0xD8, 0x0A),
> + _INIT_DCS_CMD(0xD9, 0x0A),
> + _INIT_DCS_CMD(0xC2, 0x0B),
> + _INIT_DCS_CMD(0xC3, 0x0B),
> + _INIT_DCS_CMD(0xD6, 0x0C),
> + _INIT_DCS_CMD(0xD7, 0x0C),
> + _INIT_DCS_CMD(0xC0, 0x05),
> + _INIT_DCS_CMD(0xC1, 0x05),
> + _INIT_DCS_CMD(0xD4, 0x06),
> + _INIT_DCS_CMD(0xD5, 0x06),
> + _INIT_DCS_CMD(0xCA, 0x07),
> + _INIT_DCS_CMD(0xCB, 0x07),
> + _INIT_DCS_CMD(0xDE, 0x08),
> + _INIT_DCS_CMD(0xDF, 0x08),
> +
> + _INIT_DCS_CMD(0xB0, 0x02),
> + _INIT_DCS_CMD(0xC0, 0x00),
> + _INIT_DCS_CMD(0xC1, 0x0D),
> + _INIT_DCS_CMD(0xC2, 0x17),
> + _INIT_DCS_CMD(0xC3, 0x26),
> + _INIT_DCS_CMD(0xC4, 0x31),
> + _INIT_DCS_CMD(0xC5, 0x1C),
> + _INIT_DCS_CMD(0xC6, 0x2C),
> + _INIT_DCS_CMD(0xC7, 0x33),
> + _INIT_DCS_CMD(0xC8, 0x31),
> + _INIT_DCS_CMD(0xC9, 0x37),
> + _INIT_DCS_CMD(0xCA, 0x37),
> + _INIT_DCS_CMD(0xCB, 0x37),
> + _INIT_DCS_CMD(0xCC, 0x39),
> + _INIT_DCS_CMD(0xCD, 0x2E),
> + _INIT_DCS_CMD(0xCE, 0x2F),
> + _INIT_DCS_CMD(0xCF, 0x2F),
> + _INIT_DCS_CMD(0xD0, 0x07),
> + _INIT_DCS_CMD(0xD2, 0x00),
> + _INIT_DCS_CMD(0xD3, 0x0D),
> + _INIT_DCS_CMD(0xD4, 0x17),
> + _INIT_DCS_CMD(0xD5, 0x26),
> + _INIT_DCS_CMD(0xD6, 0x31),
> + _INIT_DCS_CMD(0xD7, 0x3F),
> + _INIT_DCS_CMD(0xD8, 0x3F),
> + _INIT_DCS_CMD(0xD9, 0x3F),
> + _INIT_DCS_CMD(0xDA, 0x3F),
> + _INIT_DCS_CMD(0xDB, 0x37),
> + _INIT_DCS_CMD(0xDC, 0x37),
> + _INIT_DCS_CMD(0xDD, 0x37),
> + _INIT_DCS_CMD(0xDE, 0x39),
> + _INIT_DCS_CMD(0xDF, 0x2E),
> + _INIT_DCS_CMD(0xE0, 0x2F),
> + _INIT_DCS_CMD(0xE1, 0x2F),
> + _INIT_DCS_CMD(0xE2, 0x07),
> +
> + _INIT_DCS_CMD(0xB0, 0x03),
> + _INIT_DCS_CMD(0xC8, 0x0B),
> + _INIT_DCS_CMD(0xC9, 0x07),
> + _INIT_DCS_CMD(0xC3, 0x00),
> + _INIT_DCS_CMD(0xE7, 0x00),
> + _INIT_DCS_CMD(0xC5, 0x2A),
> + _INIT_DCS_CMD(0xDE, 0x2A),
> + _INIT_DCS_CMD(0xCA, 0x43),
> + _INIT_DCS_CMD(0xC9, 0x07),
> + _INIT_DCS_CMD(0xE4, 0xC0),
> + _INIT_DCS_CMD(0xE5, 0x0D),
> + _INIT_DCS_CMD(0xCB, 0x00),
> +
> + _INIT_DCS_CMD(0xB0, 0x06),
> + _INIT_DCS_CMD(0xB8, 0xA5),
> + _INIT_DCS_CMD(0xC0, 0xA5),
> + _INIT_DCS_CMD(0xC7, 0x0F),
> + _INIT_DCS_CMD(0xD5, 0x32),
> + _INIT_DCS_CMD(0xB8, 0x00),
> + _INIT_DCS_CMD(0xC0, 0x00),
> + _INIT_DCS_CMD(0xBC, 0x00),
> +
> + _INIT_DCS_CMD(0xB0, 0x07),
> + _INIT_DCS_CMD(0xB1, 0x00),
> + _INIT_DCS_CMD(0xB2, 0x02),
> + _INIT_DCS_CMD(0xB3, 0x0F),
> + _INIT_DCS_CMD(0xB4, 0x25),
> + _INIT_DCS_CMD(0xB5, 0x39),
> + _INIT_DCS_CMD(0xB6, 0x4E),
> + _INIT_DCS_CMD(0xB7, 0x72),
> + _INIT_DCS_CMD(0xB8, 0x97),
> + _INIT_DCS_CMD(0xB9, 0xDC),
> + _INIT_DCS_CMD(0xBA, 0x22),
> + _INIT_DCS_CMD(0xBB, 0xA4),
> + _INIT_DCS_CMD(0xBC, 0x2B),
> + _INIT_DCS_CMD(0xBD, 0x2F),
> + _INIT_DCS_CMD(0xBE, 0xA9),
> + _INIT_DCS_CMD(0xBF, 0x25),
> + _INIT_DCS_CMD(0xC0, 0x61),
> + _INIT_DCS_CMD(0xC1, 0x97),
> + _INIT_DCS_CMD(0xC2, 0xB2),
> + _INIT_DCS_CMD(0xC3, 0xCD),
> + _INIT_DCS_CMD(0xC4, 0xD9),
> + _INIT_DCS_CMD(0xC5, 0xE7),
> + _INIT_DCS_CMD(0xC6, 0xF4),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x08),
> + _INIT_DCS_CMD(0xB1, 0x04),
> + _INIT_DCS_CMD(0xB2, 0x05),
> + _INIT_DCS_CMD(0xB3, 0x11),
> + _INIT_DCS_CMD(0xB4, 0x24),
> + _INIT_DCS_CMD(0xB5, 0x39),
> + _INIT_DCS_CMD(0xB6, 0x4F),
> + _INIT_DCS_CMD(0xB7, 0x72),
> + _INIT_DCS_CMD(0xB8, 0x98),
> + _INIT_DCS_CMD(0xB9, 0xDC),
> + _INIT_DCS_CMD(0xBA, 0x23),
> + _INIT_DCS_CMD(0xBB, 0xA6),
> + _INIT_DCS_CMD(0xBC, 0x2C),
> + _INIT_DCS_CMD(0xBD, 0x30),
> + _INIT_DCS_CMD(0xBE, 0xAA),
> + _INIT_DCS_CMD(0xBF, 0x26),
> + _INIT_DCS_CMD(0xC0, 0x62),
> + _INIT_DCS_CMD(0xC1, 0x9B),
> + _INIT_DCS_CMD(0xC2, 0xB5),
> + _INIT_DCS_CMD(0xC3, 0xCF),
> + _INIT_DCS_CMD(0xC4, 0xDB),
> + _INIT_DCS_CMD(0xC5, 0xE8),
> + _INIT_DCS_CMD(0xC6, 0xF5),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x09),
> + _INIT_DCS_CMD(0xB1, 0x04),
> + _INIT_DCS_CMD(0xB2, 0x02),
> + _INIT_DCS_CMD(0xB3, 0x16),
> + _INIT_DCS_CMD(0xB4, 0x24),
> + _INIT_DCS_CMD(0xB5, 0x3B),
> + _INIT_DCS_CMD(0xB6, 0x4F),
> + _INIT_DCS_CMD(0xB7, 0x73),
> + _INIT_DCS_CMD(0xB8, 0x99),
> + _INIT_DCS_CMD(0xB9, 0xE0),
> + _INIT_DCS_CMD(0xBA, 0x26),
> + _INIT_DCS_CMD(0xBB, 0xAD),
> + _INIT_DCS_CMD(0xBC, 0x36),
> + _INIT_DCS_CMD(0xBD, 0x3A),
> + _INIT_DCS_CMD(0xBE, 0xAE),
> + _INIT_DCS_CMD(0xBF, 0x2A),
> + _INIT_DCS_CMD(0xC0, 0x66),
> + _INIT_DCS_CMD(0xC1, 0x9E),
> + _INIT_DCS_CMD(0xC2, 0xB8),
> + _INIT_DCS_CMD(0xC3, 0xD1),
> + _INIT_DCS_CMD(0xC4, 0xDD),
> + _INIT_DCS_CMD(0xC5, 0xE9),
> + _INIT_DCS_CMD(0xC6, 0xF6),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x0A),
> + _INIT_DCS_CMD(0xB1, 0x00),
> + _INIT_DCS_CMD(0xB2, 0x02),
> + _INIT_DCS_CMD(0xB3, 0x0F),
> + _INIT_DCS_CMD(0xB4, 0x25),
> + _INIT_DCS_CMD(0xB5, 0x39),
> + _INIT_DCS_CMD(0xB6, 0x4E),
> + _INIT_DCS_CMD(0xB7, 0x72),
> + _INIT_DCS_CMD(0xB8, 0x97),
> + _INIT_DCS_CMD(0xB9, 0xDC),
> + _INIT_DCS_CMD(0xBA, 0x22),
> + _INIT_DCS_CMD(0xBB, 0xA4),
> + _INIT_DCS_CMD(0xBC, 0x2B),
> + _INIT_DCS_CMD(0xBD, 0x2F),
> + _INIT_DCS_CMD(0xBE, 0xA9),
> + _INIT_DCS_CMD(0xBF, 0x25),
> + _INIT_DCS_CMD(0xC0, 0x61),
> + _INIT_DCS_CMD(0xC1, 0x97),
> + _INIT_DCS_CMD(0xC2, 0xB2),
> + _INIT_DCS_CMD(0xC3, 0xCD),
> + _INIT_DCS_CMD(0xC4, 0xD9),
> + _INIT_DCS_CMD(0xC5, 0xE7),
> + _INIT_DCS_CMD(0xC6, 0xF4),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x0B),
> + _INIT_DCS_CMD(0xB1, 0x04),
> + _INIT_DCS_CMD(0xB2, 0x05),
> + _INIT_DCS_CMD(0xB3, 0x11),
> + _INIT_DCS_CMD(0xB4, 0x24),
> + _INIT_DCS_CMD(0xB5, 0x39),
> + _INIT_DCS_CMD(0xB6, 0x4F),
> + _INIT_DCS_CMD(0xB7, 0x72),
> + _INIT_DCS_CMD(0xB8, 0x98),
> + _INIT_DCS_CMD(0xB9, 0xDC),
> + _INIT_DCS_CMD(0xBA, 0x23),
> + _INIT_DCS_CMD(0xBB, 0xA6),
> + _INIT_DCS_CMD(0xBC, 0x2C),
> + _INIT_DCS_CMD(0xBD, 0x30),
> + _INIT_DCS_CMD(0xBE, 0xAA),
> + _INIT_DCS_CMD(0xBF, 0x26),
> + _INIT_DCS_CMD(0xC0, 0x62),
> + _INIT_DCS_CMD(0xC1, 0x9B),
> + _INIT_DCS_CMD(0xC2, 0xB5),
> + _INIT_DCS_CMD(0xC3, 0xCF),
> + _INIT_DCS_CMD(0xC4, 0xDB),
> + _INIT_DCS_CMD(0xC5, 0xE8),
> + _INIT_DCS_CMD(0xC6, 0xF5),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x0C),
> + _INIT_DCS_CMD(0xB1, 0x04),
> + _INIT_DCS_CMD(0xB2, 0x02),
> + _INIT_DCS_CMD(0xB3, 0x16),
> + _INIT_DCS_CMD(0xB4, 0x24),
> + _INIT_DCS_CMD(0xB5, 0x3B),
> + _INIT_DCS_CMD(0xB6, 0x4F),
> + _INIT_DCS_CMD(0xB7, 0x73),
> + _INIT_DCS_CMD(0xB8, 0x99),
> + _INIT_DCS_CMD(0xB9, 0xE0),
> + _INIT_DCS_CMD(0xBA, 0x26),
> + _INIT_DCS_CMD(0xBB, 0xAD),
> + _INIT_DCS_CMD(0xBC, 0x36),
> + _INIT_DCS_CMD(0xBD, 0x3A),
> + _INIT_DCS_CMD(0xBE, 0xAE),
> + _INIT_DCS_CMD(0xBF, 0x2A),
> + _INIT_DCS_CMD(0xC0, 0x66),
> + _INIT_DCS_CMD(0xC1, 0x9E),
> + _INIT_DCS_CMD(0xC2, 0xB8),
> + _INIT_DCS_CMD(0xC3, 0xD1),
> + _INIT_DCS_CMD(0xC4, 0xDD),
> + _INIT_DCS_CMD(0xC5, 0xE9),
> + _INIT_DCS_CMD(0xC6, 0xF6),
> + _INIT_DCS_CMD(0xC7, 0xFA),
> + _INIT_DCS_CMD(0xC8, 0xFC),
> + _INIT_DCS_CMD(0xC9, 0x00),
> + _INIT_DCS_CMD(0xCA, 0x00),
> + _INIT_DCS_CMD(0xCB, 0x16),
> + _INIT_DCS_CMD(0xCC, 0xAF),
> + _INIT_DCS_CMD(0xCD, 0xFF),
> + _INIT_DCS_CMD(0xCE, 0xFF),
> +
> + _INIT_DCS_CMD(0xB0, 0x00),
> + _INIT_DCS_CMD(0xB3, 0x08),
> + _INIT_DCS_CMD(0xB0, 0x04),
> + _INIT_DCS_CMD(0xB8, 0x68),
> + _INIT_DELAY_CMD(150),
> + {},
> +};
> +
> +static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct boe_panel, base);
> +}
> +
> +static int boe_panel_init(struct boe_panel *boe)
> +{
> + struct mipi_dsi_device *dsi = boe->dsi;
> + struct drm_panel *panel = &boe->base;
> + int err, i;
> +
> + for (i = 0; boe_init_cmd[i].len != 0; i++) {
> + const struct panel_init_cmd *cmd = &boe_init_cmd[i];
> +
> + switch (cmd->type) {
> + case INIT_DCS_CMD:
> + err = mipi_dsi_dcs_write(dsi, cmd->data[0],
> + (cmd->len <= 1) ? NULL :
> + &cmd->data[1], cmd->len - 1);
> + break;
> +
> + case DELAY_CMD:
> + msleep(cmd->data[0]);
> + err = 0;
> + break;
> +
> + case INIT_GENENIC_CMD:
> + default:
> + err = mipi_dsi_generic_write(dsi, cmd->data, cmd->len);
> + break;
> + }
> +
> + if (err < 0) {
> + dev_err(panel->dev,
> + "failed to write command %u\n", i);
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int boe_panel_off(struct boe_panel *boe)
> +{
> + struct mipi_dsi_device *dsi = boe->dsi;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int boe_panel_disable(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> +
> + if (!boe->enabled)
> + return 0;
> +
> + backlight_disable(boe->backlight);
> +
> + boe->enabled = false;
> +
> + return 0;
> +}
> +
> +static int boe_panel_unprepare(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> + int ret;
> +
> + if (!boe->prepared)
> + return 0;
> +
> + ret = boe_panel_off(boe);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to set panel off: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(150);
> + if (boe->enable_gpio)
> + gpiod_set_value(boe->enable_gpio, 0);
> + usleep_range(500, 1000);
> + regulator_disable(boe->avee);
> + regulator_disable(boe->avdd);
> + usleep_range(5000, 7000);
> + regulator_disable(boe->pp1800);
> +
> + boe->prepared = false;
> +
> + return 0;
> +}
> +
> +static int boe_panel_prepare(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> + int ret;
> +
> + if (boe->prepared)
> + return 0;
> +
> + if (boe->enable_gpio) {
> + gpiod_set_value(boe->enable_gpio, 0);
> + usleep_range(1000, 1500);
> + }
> +
> + ret = regulator_enable(boe->pp1800);
> + if (ret < 0)
> + return ret;
> +
> + usleep_range(3000, 5000);
> +
> + ret = regulator_enable(boe->avdd);
> + if (ret < 0)
> + goto poweroff1v8;
> + ret = regulator_enable(boe->avee);
> + if (ret < 0)
> + goto poweroffavdd;
> +
> + msleep(100);
> +
> + if (boe->enable_gpio) {
> + gpiod_set_value(boe->enable_gpio, 1);
> + usleep_range(10000, 12000);
> + }
> +
> + ret = boe_panel_init(boe);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to init panel: %d\n", ret);
> + goto poweroff;
> + }
> +
> + boe->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + regulator_disable(boe->avee);
> +poweroffavdd:
> + regulator_disable(boe->avdd);
> +poweroff1v8:
> + usleep_range(5000, 7000);
> + regulator_disable(boe->pp1800);
> + if (boe->enable_gpio)
> + gpiod_set_value(boe->enable_gpio, 0);
> + return ret;
> +}
> +
> +static int boe_panel_enable(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> + int ret;
> +
> + if (boe->enabled)
> + return 0;
> +
> + ret = backlight_enable(boe->backlight);
> + if (ret) {
> + DRM_DEV_ERROR(panel->drm->dev,
> + "Failed to enable backlight %d\n", ret);
There is inconsistent use of logging.
One place uses dev_err(), and here DRM_DEV_ERROR().
I learned that neither are optimal, but for now stick with one way to do
it.
> + return ret;
> + }
> +
> + boe->enabled = true;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 159425,
> + .hdisplay = 1200,
> + .hsync_start = 1200 + 100,
> + .hsync_end = 1200 + 100 + 40,
> + .htotal = 1200 + 100 + 40 + 24,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 10,
> + .vsync_end = 1920 + 10 + 14,
> + .vtotal = 1920 + 10 + 14 + 4,
> + .vrefresh = 60,
> +};
> +
> +static int boe_panel_get_modes(struct drm_panel *panel)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
An extra x has sneaked in here.
wrong: "failed oo add mode %ux%ux@%u\n"
good: "failed to add mode %ux%u@%u\n"
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(panel->connector, mode);
> +
> + panel->connector->display_info.width_mm = 135;
> + panel->connector->display_info.height_mm = 216;
> + panel->connector->display_info.bpc = 8;
Please embed these constants in default_mde, and then read them from
there. So you avoid hardcoding display parameters in more places.
I think you should also add DRM_MODE_TYPE_PREFERRED - se other drivers.
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs boe_panel_funcs = {
> + .disable = boe_panel_disable,
> + .unprepare = boe_panel_unprepare,
> + .prepare = boe_panel_prepare,
> + .enable = boe_panel_enable,
> + .get_modes = boe_panel_get_modes,
> +};
> +
> +static int boe_panel_add(struct boe_panel *boe)
> +{
> + struct device *dev = &boe->dsi->dev;
> +
> + boe->avdd = devm_regulator_get(dev, "avdd");
> + if (IS_ERR(boe->avdd))
> + return PTR_ERR(boe->avdd);
> +
> + boe->avee = devm_regulator_get(dev, "avee");
> + if (IS_ERR(boe->avee))
> + return PTR_ERR(boe->avee);
> +
> + boe->pp1800 = devm_regulator_get(dev, "pp1800");
> + if (IS_ERR(boe->pp1800))
> + return PTR_ERR(boe->pp1800);
> +
> + boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(boe->enable_gpio)) {
> + dev_err(dev, "cannot get reset-gpios %ld\n",
> + PTR_ERR(boe->enable_gpio));
> + boe->enable_gpio = NULL;
> + } else {
> + gpiod_set_value(boe->enable_gpio, 0);
> + }
The enable_gpio is mandatory according to the binding.
So if this is true then error out if missing.
And drop all code that hanle that enable_gpio is optionel.
> +
> + boe->backlight = devm_of_find_backlight(dev);
> + if (IS_ERR(boe->backlight))
> + return PTR_ERR(boe->backlight);
> +
> + drm_panel_init(&boe->base);
> + boe->base.funcs = &boe_panel_funcs;
> + boe->base.dev = &boe->dsi->dev;
> +
> + return drm_panel_add(&boe->base);
> +}
> +
> +static void boe_panel_del(struct boe_panel *boe)
> +{
> + if (boe->base.dev)
> + drm_panel_remove(&boe->base);
> +}
The boe_panel_del() function only obscufates it. embed it in the only
caller.
> +
> +static int boe_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct boe_panel *boe;
> + int ret;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_LPM;
> +
> + boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL);
> + if (!boe)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, boe);
> +
> + boe->dsi = dsi;
> +
> + ret = boe_panel_add(boe);
> + if (ret < 0)
> + return ret;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int boe_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = boe_panel_disable(&boe->base);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> +
> + boe_panel_del(boe);
> +
> + return 0;
> +}
> +
> +static void boe_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
> +
> + boe_panel_disable(&boe->base);
> +}
> +
> +static const struct of_device_id boe_of_match[] = {
> + { .compatible = "boe,tv101wum-nl6", },
> + { }
Some drivers use { /* sentinel */ } here.
> +};
> +MODULE_DEVICE_TABLE(of, boe_of_match);
> +
> +static struct mipi_dsi_driver boe_panel_driver = {
> + .driver = {
> + .name = "panel-boe-tv101wum-nl6",
> + .of_match_table = boe_of_match,
> + },
> + .probe = boe_panel_probe,
> + .remove = boe_panel_remove,
> + .shutdown = boe_panel_shutdown,
> +};
> +module_mipi_dsi_driver(boe_panel_driver);
> +
> +MODULE_AUTHOR("Jitao Shi <jitao.shi@...iatek.com>");
> +MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.21.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Powered by blists - more mailing lists