| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 8 Jun 2019 23:26:51 -0300
From: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>
Subject: [PATCH v3 01/33] docs: aoe: convert docs to ReST and rename to *.rst
There are only two files within Documentation/aoe dir that are
documentation. The remaining ones are examples and shell
scripts.
Convert the two AoE files to ReST format, and add the others
as literal, as they're part of the documentation.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
---
Documentation/aoe/{aoe.txt => aoe.rst} | 63 +++++++++++++-----------
Documentation/aoe/examples.rst | 23 +++++++++
Documentation/aoe/index.rst | 19 +++++++
Documentation/aoe/{todo.txt => todo.rst} | 3 ++
Documentation/aoe/udev.txt | 2 +-
5 files changed, 81 insertions(+), 29 deletions(-)
rename Documentation/aoe/{aoe.txt => aoe.rst} (79%)
create mode 100644 Documentation/aoe/examples.rst
create mode 100644 Documentation/aoe/index.rst
rename Documentation/aoe/{todo.txt => todo.rst} (98%)
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.rst
similarity index 79%
rename from Documentation/aoe/aoe.txt
rename to Documentation/aoe/aoe.rst
index c71487d399d1..58747ecec71d 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.rst
@@ -1,3 +1,6 @@
+Introduction
+============
+
ATA over Ethernet is a network protocol that provides simple access to
block storage on the LAN.
@@ -22,7 +25,8 @@ document the use of the driver and are not necessary if you install
the aoetools.
-CREATING DEVICE NODES
+Creating Device Nodes
+=====================
Users of udev should find the block device nodes created
automatically, but to create all the necessary device nodes, use the
@@ -38,7 +42,8 @@ CREATING DEVICE NODES
confusing when an AoE device is not present the first time the a
command is run but appears a second later.
-USING DEVICE NODES
+Using Device Nodes
+==================
"cat /dev/etherd/err" blocks, waiting for error diagnostic output,
like any retransmitted packets.
@@ -55,7 +60,7 @@ USING DEVICE NODES
by sysfs counterparts. Using the commands in aoetools insulates
users from these implementation details.
- The block devices are named like this:
+ The block devices are named like this::
e{shelf}.{slot}
e{shelf}.{slot}p{part}
@@ -64,7 +69,8 @@ USING DEVICE NODES
first shelf (shelf address zero). That's the whole disk. The first
partition on that disk would be "e0.2p1".
-USING SYSFS
+Using sysfs
+===========
Each aoe block device in /sys/block has the extra attributes of
state, mac, and netif. The state attribute is "up" when the device
@@ -78,29 +84,29 @@ USING SYSFS
There is a script in this directory that formats this information in
a convenient way. Users with aoetools should use the aoe-stat
- command.
+ command::
- root@...ki root# sh Documentation/aoe/status.sh
- e10.0 eth3 up
- e10.1 eth3 up
- e10.2 eth3 up
- e10.3 eth3 up
- e10.4 eth3 up
- e10.5 eth3 up
- e10.6 eth3 up
- e10.7 eth3 up
- e10.8 eth3 up
- e10.9 eth3 up
- e4.0 eth1 up
- e4.1 eth1 up
- e4.2 eth1 up
- e4.3 eth1 up
- e4.4 eth1 up
- e4.5 eth1 up
- e4.6 eth1 up
- e4.7 eth1 up
- e4.8 eth1 up
- e4.9 eth1 up
+ root@...ki root# sh Documentation/aoe/status.sh
+ e10.0 eth3 up
+ e10.1 eth3 up
+ e10.2 eth3 up
+ e10.3 eth3 up
+ e10.4 eth3 up
+ e10.5 eth3 up
+ e10.6 eth3 up
+ e10.7 eth3 up
+ e10.8 eth3 up
+ e10.9 eth3 up
+ e4.0 eth1 up
+ e4.1 eth1 up
+ e4.2 eth1 up
+ e4.3 eth1 up
+ e4.4 eth1 up
+ e4.5 eth1 up
+ e4.6 eth1 up
+ e4.7 eth1 up
+ e4.8 eth1 up
+ e4.9 eth1 up
Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
option discussed below) instead of /dev/etherd/interfaces to limit
@@ -113,12 +119,13 @@ USING SYSFS
for this purpose. You can also directly use the
/dev/etherd/discover special file described above.
-DRIVER OPTIONS
+Driver Options
+==============
There is a boot option for the built-in aoe driver and a
corresponding module parameter, aoe_iflist. Without this option,
all network interfaces may be used for ATA over Ethernet. Here is a
- usage example for the module parameter.
+ usage example for the module parameter::
modprobe aoe_iflist="eth1 eth3"
diff --git a/Documentation/aoe/examples.rst b/Documentation/aoe/examples.rst
new file mode 100644
index 000000000000..91f3198e52c1
--- /dev/null
+++ b/Documentation/aoe/examples.rst
@@ -0,0 +1,23 @@
+Example of udev rules
+---------------------
+
+ .. include:: udev.txt
+ :literal:
+
+Example of udev install rules script
+------------------------------------
+
+ .. literalinclude:: udev-install.sh
+ :language: shell
+
+Example script to get status
+----------------------------
+
+ .. literalinclude:: status.sh
+ :language: shell
+
+Example of AoE autoload script
+------------------------------
+
+ .. literalinclude:: autoload.sh
+ :language: shell
diff --git a/Documentation/aoe/index.rst b/Documentation/aoe/index.rst
new file mode 100644
index 000000000000..4394b9b7913c
--- /dev/null
+++ b/Documentation/aoe/index.rst
@@ -0,0 +1,19 @@
+:orphan:
+
+=======================
+ATA over Ethernet (AoE)
+=======================
+
+.. toctree::
+ :maxdepth: 1
+
+ aoe
+ todo
+ examples
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/aoe/todo.txt b/Documentation/aoe/todo.rst
similarity index 98%
rename from Documentation/aoe/todo.txt
rename to Documentation/aoe/todo.rst
index c09dfad4aed8..dea8db5a33e1 100644
--- a/Documentation/aoe/todo.txt
+++ b/Documentation/aoe/todo.rst
@@ -1,3 +1,6 @@
+TODO
+====
+
There is a potential for deadlock when allocating a struct sk_buff for
data that needs to be written out to aoe storage. If the data is
being written from a dirty page in order to free that page, and if
diff --git a/Documentation/aoe/udev.txt b/Documentation/aoe/udev.txt
index 1f06daf03f5b..54feda5a0772 100644
--- a/Documentation/aoe/udev.txt
+++ b/Documentation/aoe/udev.txt
@@ -11,7 +11,7 @@
# udev_rules="/etc/udev/rules.d/"
# bash# ls /etc/udev/rules.d/
# 10-wacom.rules 50-udev.rules
-# bash# cp /path/to/linux-2.6.xx/Documentation/aoe/udev.txt \
+# bash# cp /path/to/linux/Documentation/aoe/udev.txt \
# /etc/udev/rules.d/60-aoe.rules
#
--
2.21.0
Powered by blists - more mailing lists