lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sat, 8 Jun 2019 23:27:23 -0300 From: Mauro Carvalho Chehab <mchehab+samsung@...nel.org> To: Linux Doc Mailing List <linux-doc@...r.kernel.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>, Mauro Carvalho Chehab <mchehab@...radead.org>, linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>, Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <maxime.ripard@...tlin.com>, Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>, dri-devel@...ts.freedesktop.org Subject: [PATCH v3 33/33] docs: EDID/HOWTO.txt: convert it and rename to howto.rst Sphinx need to know when a paragraph ends. So, do some adjustments at the file for it to be properly parsed. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. that's said, I believe that this file should be moved to the GPU/DRM documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org> --- Documentation/EDID/{HOWTO.txt => howto.rst} | 31 ++++++++++++------- .../admin-guide/kernel-parameters.txt | 2 +- drivers/gpu/drm/Kconfig | 2 +- 3 files changed, 22 insertions(+), 13 deletions(-) rename Documentation/EDID/{HOWTO.txt => howto.rst} (83%) diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/howto.rst similarity index 83% rename from Documentation/EDID/HOWTO.txt rename to Documentation/EDID/howto.rst index 539871c3b785..725fd49a88ca 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/howto.rst @@ -1,3 +1,9 @@ +:orphan: + +==== +EDID +==== + In the good old days when graphics parameters were configured explicitly in a file called xorg.conf, even broken hardware could be managed. @@ -34,16 +40,19 @@ Makefile. Please note that the EDID data structure expects the timing values in a different way as compared to the standard X11 format. X11: -HTimings: hdisp hsyncstart hsyncend htotal -VTimings: vdisp vsyncstart vsyncend vtotal + HTimings: + hdisp hsyncstart hsyncend htotal + VTimings: + vdisp vsyncstart vsyncend vtotal -EDID: -#define XPIX hdisp -#define XBLANK htotal-hdisp -#define XOFFSET hsyncstart-hdisp -#define XPULSE hsyncend-hsyncstart +EDID:: -#define YPIX vdisp -#define YBLANK vtotal-vdisp -#define YOFFSET vsyncstart-vdisp -#define YPULSE vsyncend-vsyncstart + #define XPIX hdisp + #define XBLANK htotal-hdisp + #define XOFFSET hsyncstart-hdisp + #define XPULSE hsyncend-hsyncstart + + #define YPIX vdisp + #define YBLANK vtotal-vdisp + #define YOFFSET vsyncstart-vdisp + #define YPULSE vsyncend-vsyncstart diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 3d072ca532bb..3faf37b8b001 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -930,7 +930,7 @@ edid/1680x1050.bin, or edid/1920x1080.bin is given and no file with the same name exists. Details and instructions how to build your own EDID data are - available in Documentation/EDID/HOWTO.txt. An EDID + available in Documentation/EDID/howto.rst. An EDID data set will only be used for a particular connector, if its name and a colon are prepended to the EDID name. Each connector may use a unique EDID data diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 6b34949416b1..c3a6dd284c91 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -141,7 +141,7 @@ config DRM_LOAD_EDID_FIRMWARE monitor are unable to provide appropriate EDID data. Since this feature is provided as a workaround for broken hardware, the default case is N. Details and instructions how to build your own - EDID data are given in Documentation/EDID/HOWTO.txt. + EDID data are given in Documentation/EDID/howto.rst. config DRM_DP_CEC bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support" -- 2.21.0
Powered by blists - more mailing lists