| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1560152904-31894-1-git-send-email-haoxu.linuxkernel@gmail.com>
Date: Mon, 10 Jun 2019 15:48:24 +0800
From: Hao Xu <haoxu.linuxkernel@...il.com>
To: gregkh@...uxfoundation.org
Cc: gneukum1@...il.com, haoxu.linuxkernel@...il.com,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] staging: kpc2000: kpc_i2c: remove the macros inb_p and outb_p
remove inb_p and outb_p to call readq/writeq directly.
Signed-off-by: Hao Xu <haoxu.linuxkernel@...il.com>
---
Changes in v2:
- remove the macros inb_p/outb_p and use readq/writeq directly, per https://lkml.kernel.org/lkml/20190608134505.GA963@arch-01.home/
---
drivers/staging/kpc2000/kpc2000_i2c.c | 112 ++++++++++++++++------------------
1 file changed, 53 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/kpc2000/kpc2000_i2c.c b/drivers/staging/kpc2000/kpc2000_i2c.c
index 69e8773..246d5b3 100644
--- a/drivers/staging/kpc2000/kpc2000_i2c.c
+++ b/drivers/staging/kpc2000/kpc2000_i2c.c
@@ -122,12 +122,6 @@ struct i2c_device {
/* Not really a feature, but it's convenient to handle it as such */
#define FEATURE_IDF BIT(15)
-// FIXME!
-#undef inb_p
-#define inb_p(a) readq((void *)a)
-#undef outb_p
-#define outb_p(d, a) writeq(d, (void *)a)
-
/* Make sure the SMBus host is ready to start transmitting.
* Return 0 if it is, -EBUSY if it is not.
*/
@@ -135,7 +129,7 @@ static int i801_check_pre(struct i2c_device *priv)
{
int status;
- status = inb_p(SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv));
if (status & SMBHSTSTS_HOST_BUSY) {
dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
return -EBUSY;
@@ -144,8 +138,8 @@ static int i801_check_pre(struct i2c_device *priv)
status &= STATUS_FLAGS;
if (status) {
//dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status);
- outb_p(status, SMBHSTSTS(priv));
- status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ writeq(status, (void *)SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
return -EBUSY;
@@ -164,15 +158,15 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
dev_err(&priv->adapter.dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
+ writeq(readq((void *)SMBHSTCNT(priv)) | SMBHSTCNT_KILL, (void *)SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
+ writeq(readq((void *)SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), (void *)SMBHSTCNT(priv));
/* Check if it worked */
- status = inb_p(SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv));
if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
- outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+ writeq(STATUS_FLAGS, (void *)SMBHSTSTS(priv));
return -ETIMEDOUT;
}
@@ -191,8 +185,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
if (result) {
/* Clear error flags */
- outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
- status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ writeq(status & STATUS_FLAGS, (void *)SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status)
dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
}
@@ -212,19 +206,19 @@ static int i801_transaction(struct i2c_device *priv, int xact)
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
* INTREN, SMBSCMD are passed in xact
*/
- outb_p(xact | I801_START, SMBHSTCNT(priv));
+ writeq(xact | I801_START, (void *)SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
do {
usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv));
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0)
return result;
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ writeq(SMBHSTSTS_INTR, (void *)SMBHSTSTS(priv));
return 0;
}
@@ -236,13 +230,13 @@ static void i801_wait_hwpec(struct i2c_device *priv)
do {
usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
if (timeout > MAX_RETRIES)
dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
- outb_p(status, SMBHSTSTS(priv));
+ writeq(status, (void *)SMBHSTSTS(priv));
}
static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int hwpec)
@@ -250,14 +244,14 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
int i, len;
int status;
- inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+ readq((void *)SMBHSTCNT(priv)); /* reset the data buffer index */
/* Use 32-byte buffer to process this transaction */
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
- outb_p(len, SMBHSTDAT0(priv));
+ writeq(len, (void *)SMBHSTDAT0(priv));
for (i = 0; i < len; i++)
- outb_p(data->block[i+1], SMBBLKDAT(priv));
+ writeq(data->block[i+1], (void *)SMBBLKDAT(priv));
}
status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
@@ -265,13 +259,13 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
return status;
if (read_write == I2C_SMBUS_READ) {
- len = inb_p(SMBHSTDAT0(priv));
+ len = readq((void *)SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
data->block[0] = len;
for (i = 0; i < len; i++)
- data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+ data->block[i + 1] = readq((void *)SMBBLKDAT(priv));
}
return 0;
}
@@ -291,8 +285,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- outb_p(len, SMBHSTDAT0(priv));
- outb_p(data->block[1], SMBBLKDAT(priv));
+ writeq(len, (void *)SMBHSTDAT0(priv));
+ writeq(data->block[1], (void *)SMBBLKDAT(priv));
}
for (i = 1; i <= len; i++) {
@@ -307,28 +301,28 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
else
smbcmd = I801_BLOCK_DATA;
}
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
+ writeq(smbcmd | ENABLE_INT9, (void *)SMBHSTCNT(priv));
if (i == 1)
- outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
+ writeq(inb(SMBHSTCNT(priv)) | I801_START, (void *)SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
+ status = readq((void *)SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0)
return result;
if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- len = inb_p(SMBHSTDAT0(priv));
+ len = readq((void *)SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
/* Recover */
- while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY)
- outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ while (readq((void *)SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY)
+ writeq(SMBHSTSTS_BYTE_DONE, (void *)SMBHSTSTS(priv));
+ writeq(SMBHSTSTS_INTR, (void *)SMBHSTSTS(priv));
return -EPROTO;
}
data->block[0] = len;
@@ -336,11 +330,11 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
/* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ)
- data->block[i] = inb_p(SMBBLKDAT(priv));
+ data->block[i] = readq((void *)SMBBLKDAT(priv));
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
- outb_p(data->block[i+1], SMBBLKDAT(priv));
+ writeq(data->block[i+1], (void *)SMBBLKDAT(priv));
/* signals SMBBLKDAT ready */
- outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ writeq(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, (void *)SMBHSTSTS(priv));
}
return 0;
@@ -348,8 +342,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
static int i801_set_block_buffer_mode(struct i2c_device *priv)
{
- outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
- if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+ writeq(readq((void *)SMBAUXCTL(priv)) | SMBAUXCTL_E32B, (void *)SMBAUXCTL(priv));
+ if ((readq((void *)SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
return -EIO;
return 0;
}
@@ -412,39 +406,39 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
switch (size) {
case I2C_SMBUS_QUICK:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ writeq(((addr & 0x7f) << 1) | (read_write & 0x01), (void *)SMBHSTADD(priv));
xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ writeq(((addr & 0x7f) << 1) | (read_write & 0x01), (void *)SMBHSTADD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(command, SMBHSTCMD(priv));
+ writeq(command, (void *)SMBHSTCMD(priv));
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
+ writeq(((addr & 0x7f) << 1) | (read_write & 0x01), (void *)SMBHSTADD(priv));
+ writeq(command, (void *)SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(data->byte, SMBHSTDAT0(priv));
+ writeq(data->byte, (void *)SMBHSTDAT0(priv));
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
+ writeq(((addr & 0x7f) << 1) | (read_write & 0x01), (void *)SMBHSTADD(priv));
+ writeq(command, (void *)SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->word & 0xff, SMBHSTDAT0(priv));
- outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ writeq(data->word & 0xff, (void *)SMBHSTDAT0(priv));
+ writeq((data->word & 0xff00) >> 8, (void *)SMBHSTDAT1(priv));
}
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
+ writeq(((addr & 0x7f) << 1) | (read_write & 0x01), (void *)SMBHSTADD(priv));
+ writeq(command, (void *)SMBHSTCMD(priv));
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
@@ -452,14 +446,14 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
/* NB: page 240 of ICH5 datasheet shows that the R/#W
* bit should be cleared here, even when reading
*/
- outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ writeq((addr & 0x7f) << 1, (void *)SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading
*/
- outb_p(command, SMBHSTDAT1(priv));
+ writeq(command, (void *)SMBHSTDAT1(priv));
} else {
- outb_p(command, SMBHSTCMD(priv));
+ writeq(command, (void *)SMBHSTCMD(priv));
}
block = 1;
break;
@@ -470,10 +464,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
if (hwpec) { /* enable/disable hardware PEC */
dev_dbg(&priv->adapter.dev, " [acc] hwpec: yes\n");
- outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ writeq(readq((void *)SMBAUXCTL(priv)) | SMBAUXCTL_CRC, (void *)SMBAUXCTL(priv));
} else {
dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
- outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
+ writeq(readq((void *)SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), (void *)SMBAUXCTL(priv));
}
if (block) {
@@ -491,7 +485,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
*/
if (hwpec || block) {
dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
- outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+ writeq(readq((void *)SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), (void *)SMBAUXCTL(priv));
}
if (block) {
dev_dbg(&priv->adapter.dev, " [acc] block\n");
@@ -510,11 +504,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
case I801_BYTE: /* Result put in SMBHSTDAT0 */
case I801_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
- data->byte = inb_p(SMBHSTDAT0(priv));
+ data->byte = readq((void *)SMBHSTDAT0(priv));
break;
case I801_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
- data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
+ data->word = readq((void *)SMBHSTDAT0(priv)) + (readq((void *)SMBHSTDAT1(priv)) << 8);
break;
}
return 0;
--
1.8.3.1
Powered by blists - more mailing lists