linux-kernel - [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190610081753.11422-1-yibin.gong@nxp.com>
Date:   Mon, 10 Jun 2019 16:17:38 +0800
From:   yibin.gong@....com
To:     robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, broonie@...nel.org,
        festevam@...il.com, vkoul@...nel.org, dan.j.williams@...el.com,
        u.kleine-koenig@...gutronix.de, catalin.marinas@....com,
        l.stach@...gutronix.de, will.deacon@....com
Cc:     linux-spi@...r.kernel.org, linux-imx@....com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        dmaengine@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family

From: Robin Gong <yibin.gong@....com>

  There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
exist on all legacy i.mx6/7 soc family before i.mx6ul.
  NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
or not.
  The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
  Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
   Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1.Add commit log for reverted patches.
  2.Add comment for 'ecspi_fixed' in sdma driver.
  3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
    rather than remove.
v3:
  1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
    /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
    Correct dts related dts patch in v2.
  2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
    in spi-imx driver to state ERR009165 fixed or not.
  3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
    errata workaroud, thus improve performance as possible.
v4:
  1.add Ack tag from Mark and Vinod
  2. remove checking 'event_id1' zero as 'event_id0'.
v5:
  1.Add another patch for compatible with the current uart driver which
    using rom script, so both uart ram script and rom script supported
    in latest firmware, by default uart rom script used. UART driver
    will be broken without this patch. Latest sdma firmware has been
    already updated in linux-firmware. 

Robin Gong (15):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove dupilicated sdma_load_context
  dmaengine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  spi: imx: add new i.mx6ul compatible name in binding doc
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dma: imx-sdma: add i.mx6ul/6sx compatible name
  dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  ARM: dts: imx6ul: add dma support on ecspi
  ARM: dts: imx6sll: correct sdma compatible
  arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  dmaengine: imx-sdma: add uart rom script

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
 arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
 arch/arm64/configs/defconfig                       |  3 +
 drivers/dma/imx-sdma.c                             | 88 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 61 ++++++++++++---
 include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
 10 files changed, 145 insertions(+), 41 deletions(-)

-- 
2.7.4