lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190610081753.11422-12-yibin.gong@nxp.com>
Date:   Mon, 10 Jun 2019 16:17:49 +0800
From:   yibin.gong@....com
To:     robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, broonie@...nel.org,
        festevam@...il.com, vkoul@...nel.org, dan.j.williams@...el.com,
        u.kleine-koenig@...gutronix.de, catalin.marinas@....com,
        l.stach@...gutronix.de, will.deacon@....com
Cc:     linux-spi@...r.kernel.org, linux-imx@....com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        dmaengine@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

From: Robin Gong <yibin.gong@....com>

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that configure
event_id1 only in case DEV_TO_DEV.

Signed-off-by: Robin Gong <yibin.gong@....com>
Acked-by: Vinod Koul <vkoul@...nel.org>
---
 drivers/dma/imx-sdma.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 525ca89..f7c150d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1202,7 +1202,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 	if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
 			(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
 		/* Handle multiple event channels differently */
-		if (sdmac->event_id1) {
+		if (sdmac->direction == DMA_DEV_TO_DEV) {
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
@@ -1370,9 +1370,9 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
-	if (sdmac->event_id1)
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
+	if (sdmac->direction == DMA_DEV_TO_DEV)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
 	sdmac->event_id0 = 0;
@@ -1670,13 +1670,11 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
-	if (sdmac->event_id1) {
+	if (sdmac->direction == DMA_DEV_TO_DEV) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
 			return -EINVAL;
 		sdma_event_enable(sdmac, sdmac->event_id1);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ