| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190610100238.GA25339@james-ThinkStation-P300>
Date: Mon, 10 Jun 2019 10:02:45 +0000
From: "james qian wang (Arm Technology China)" <james.qian.wang@....com>
To: Liviu Dudau <Liviu.Dudau@....com>
CC: "airlied@...ux.ie" <airlied@...ux.ie>,
Brian Starkey <Brian.Starkey@....com>,
"maarten.lankhorst@...ux.intel.com"
<maarten.lankhorst@...ux.intel.com>,
"sean@...rly.run" <sean@...rly.run>,
"Jonathan Chai (Arm Technology China)" <Jonathan.Chai@....com>,
"Julien Yin (Arm Technology China)" <Julien.Yin@....com>,
"thomas Sun (Arm Technology China)" <thomas.Sun@....com>,
"Lowry Li (Arm Technology China)" <Lowry.Li@....com>,
Ayan Halder <Ayan.Halder@....com>,
"Tiannan Zhu (Arm Technology China)" <Tiannan.Zhu@....com>,
"Yiqi Kang (Arm Technology China)" <Yiqi.Kang@....com>,
nd <nd@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
Ben Davis <Ben.Davis@....com>,
"Oscar Zhang (Arm Technology China)" <Oscar.Zhang@....com>,
"Channing Chen (Arm Technology China)" <Channing.Chen@....com>
Subject: Re: [PATCH 2/3] drm/komeda: Add split support for scaler
On Fri, Jun 07, 2019 at 05:46:36PM +0800, Liviu Dudau wrote:
> Hi James,
>
> On Mon, May 20, 2019 at 11:44:47AM +0100, james qian wang (Arm Technology China) wrote:
> > To achieve same caling effect compare with none split, the texel
> > calculation need to use the same scaling ratio before split, so add
> > "total_xxx" to pipeline to describe the hsize/vsize before split.
> > Update pipeline and d71_scaler_update accordingly.
> >
> > Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@....com>
> > ---
> > .../arm/display/komeda/d71/d71_component.c | 47 +++++++++++++++++--
> > .../drm/arm/display/komeda/komeda_pipeline.h | 19 ++++++--
> > .../display/komeda/komeda_pipeline_state.c | 21 ++++++++-
> > .../gpu/drm/arm/display/komeda/komeda_plane.c | 8 ++--
> > .../arm/display/komeda/komeda_wb_connector.c | 2 +-
> > 5 files changed, 81 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > index 3266bd54c936..d101a5cc2766 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > @@ -642,23 +642,58 @@ static void d71_scaler_update(struct komeda_component *c,
> >
> > malidp_write32(reg, BLK_IN_SIZE, HV_SIZE(st->hsize_in, st->vsize_in));
> > malidp_write32(reg, SC_OUT_SIZE, HV_SIZE(st->hsize_out, st->vsize_out));
> > + malidp_write32(reg, SC_H_CROP, HV_CROP(st->left_crop, st->right_crop));
> > +
> > + /* for right part, HW only sample the valid pixel which means the pixels
> > + * in left_crop will be jumpped, and the first sample pixel is:
> > + *
> > + * dst_a = st->total_hsize_out - st->hsize_out + st->left_crop + 0.5;
> > + *
> > + * Then the corresponding texel in src is:
> > + *
> > + * h_delta_phase = st->total_hsize_in / st->total_hsize_out;
> > + * src_a = dst_A * h_delta_phase;
> > + *
> > + * and h_init_phase is src_a deduct the real source start src_S;
> > + *
> > + * src_S = st->total_hsize_in - st->hsize_in;
> > + * h_init_phase = src_a - src_S;
> > + *
> > + * And HW precision for the initial/delta_phase is 16:16 fixed point,
> > + * the following is the simplified formula
> > + */
> > + if (st->right_part) {
> > + u32 dst_a = st->total_hsize_out - st->hsize_out + st->left_crop;
> > +
> > + if (st->en_img_enhancement)
> > + dst_a -= 1;
> > +
> > + init_ph = ((st->total_hsize_in * (2 * dst_a + 1) -
> > + 2 * st->total_hsize_out * (st->total_hsize_in -
> > + st->hsize_in)) << 15) / st->total_hsize_out;
> > + } else {
> > + init_ph = (st->total_hsize_in << 15) / st->total_hsize_out;
> > + }
> >
> > - init_ph = (st->hsize_in << 15) / st->hsize_out;
> > malidp_write32(reg, SC_H_INIT_PH, init_ph);
> >
> > - delta_ph = (st->hsize_in << 16) / st->hsize_out;
> > + delta_ph = (st->total_hsize_in << 16) / st->total_hsize_out;
> > malidp_write32(reg, SC_H_DELTA_PH, delta_ph);
> >
> > - init_ph = (st->vsize_in << 15) / st->vsize_out;
> > + init_ph = (st->total_vsize_in << 15) / st->vsize_out;
> > malidp_write32(reg, SC_V_INIT_PH, init_ph);
> >
> > - delta_ph = (st->vsize_in << 16) / st->vsize_out;
> > + delta_ph = (st->total_vsize_in << 16) / st->vsize_out;
> > malidp_write32(reg, SC_V_DELTA_PH, delta_ph);
> >
> > ctrl = 0;
> > ctrl |= st->en_scaling ? SC_CTRL_SCL : 0;
> > ctrl |= st->en_alpha ? SC_CTRL_AP : 0;
> > ctrl |= st->en_img_enhancement ? SC_CTRL_IENH : 0;
> > + /* If we use the hardware splitter we shouldn't set SC_CTRL_LS */
> > + if (st->en_split &&
> > + state->inputs[0].component->id != KOMEDA_COMPONENT_SPLITTER)
> > + ctrl |= SC_CTRL_LS;
> >
> > malidp_write32(reg, BLK_CONTROL, ctrl);
> > malidp_write32(reg, BLK_INPUT_ID0, to_d71_input_id(&state->inputs[0]));
> > @@ -716,10 +751,12 @@ static int d71_scaler_init(struct d71_dev *d71,
> > }
> >
> > scaler = to_scaler(c);
> > - set_range(&scaler->hsize, 4, d71->max_line_size);
> > + set_range(&scaler->hsize, 4, 2048);
> > set_range(&scaler->vsize, 4, 4096);
> > scaler->max_downscaling = 6;
> > scaler->max_upscaling = 64;
> > + scaler->scaling_split_overlap = 8;
> > + scaler->enh_split_overlap = 1;
> >
> > malidp_write32(c->reg, BLK_CONTROL, 0);
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > index c92733736799..4e1cf8fd89bf 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > @@ -247,15 +247,22 @@ struct komeda_scaler {
> > struct malidp_range hsize, vsize;
> > u32 max_upscaling;
> > u32 max_downscaling;
> > + u8 scaling_split_overlap; /* split overlap for scaling */
> > + u8 enh_split_overlap; /* split overlap for image enhancement */
> > };
> >
> > struct komeda_scaler_state {
> > struct komeda_component_state base;
> > u16 hsize_in, vsize_in;
> > u16 hsize_out, vsize_out;
> > + u16 total_hsize_in, total_vsize_in;
> > + u16 total_hsize_out; /* total_xxxx are size before split */
> > + u16 left_crop, right_crop;
> > u8 en_scaling : 1,
> > en_alpha : 1, /* enable alpha processing */
> > - en_img_enhancement : 1;
> > + en_img_enhancement : 1,
> > + en_split : 1,
> > + right_part; /* right part of split image */
>
> Should right_part be a 1 bit value here, same as in komeda_data_flow_cfg ?
>
Yes, it should be a 1 bit value, will correct it
James
> > };
> >
> > struct komeda_compiz {
> > @@ -323,11 +330,16 @@ struct komeda_data_flow_cfg {
> > struct komeda_component_output input;
> > u16 in_x, in_y, in_w, in_h;
> > u32 out_x, out_y, out_w, out_h;
> > + u16 total_in_h, total_in_w;
> > + u16 total_out_w;
> > + u16 left_crop, right_crop, overlap;
> > u32 rot;
> > int blending_zorder;
> > u8 pixel_blend_mode, layer_alpha;
> > u8 needs_scaling : 1,
> > - needs_img_enhancement : 1;
> > + needs_img_enhancement : 1,
> > + needs_split : 1,
> > + right_part : 1; /* right part of display image if split enabled */
> > };
> >
> > /** struct komeda_pipeline_funcs */
> > @@ -488,6 +500,7 @@ void komeda_pipeline_disable(struct komeda_pipeline *pipe,
> > void komeda_pipeline_update(struct komeda_pipeline *pipe,
> > struct drm_atomic_state *old_state);
> >
> > -void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow);
> > +void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow,
> > + struct drm_framebuffer *fb);
> >
> > #endif /* _KOMEDA_PIPELINE_H_*/
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > index fcd34164b3c2..9657dbfe0210 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > @@ -489,11 +489,19 @@ komeda_scaler_validate(void *user,
> > st->hsize_in = dflow->in_w;
> > st->vsize_in = dflow->in_h;
> > st->hsize_out = dflow->out_w;
> > - st->vsize_out = dflow->out_w;
> > + st->vsize_out = dflow->out_h;
> > + st->right_crop = dflow->right_crop;
> > + st->left_crop = dflow->left_crop;
> > + st->total_vsize_in = dflow->total_in_h;
> > + st->total_hsize_in = dflow->total_in_w;
> > + st->total_hsize_out = dflow->total_out_w;
> > +
> > st->en_scaling = dflow->needs_scaling;
> > /* Enable alpha processing if the next stage needs the pixel alpha */
> > st->en_alpha = dflow->pixel_blend_mode != DRM_MODE_BLEND_PIXEL_NONE;
> > st->en_img_enhancement = dflow->needs_img_enhancement;
> > + st->en_split = dflow->needs_split;
> > + st->right_part = dflow->right_part;
> >
> > komeda_component_add_input(&st->base, &dflow->input, 0);
> > komeda_component_set_output(&dflow->input, &scaler->base, 0);
> > @@ -647,14 +655,23 @@ komeda_timing_ctrlr_validate(struct komeda_timing_ctrlr *ctrlr,
> > return 0;
> > }
> >
> > -void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow)
> > +void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow,
> > + struct drm_framebuffer *fb)
> > {
> > u32 w = dflow->in_w;
> > u32 h = dflow->in_h;
> >
> > + dflow->total_in_w = dflow->in_w;
> > + dflow->total_in_h = dflow->in_h;
> > + dflow->total_out_w = dflow->out_w;
> > +
> > if (drm_rotation_90_or_270(dflow->rot))
> > swap(w, h);
> >
> > + /* if format doesn't have alpha, fix blend mode to PIXEL_NONE */
> > + if (!fb->format->has_alpha)
> > + dflow->pixel_blend_mode = DRM_MODE_BLEND_PIXEL_NONE;
> > +
> > dflow->needs_scaling = (w != dflow->out_w) || (h != dflow->out_h);
> > }
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> > index aad766365bbb..75ef0e6c5d98 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> > @@ -22,10 +22,7 @@ komeda_plane_init_data_flow(struct drm_plane_state *st,
> > memset(dflow, 0, sizeof(*dflow));
> >
> > dflow->blending_zorder = st->normalized_zpos;
> > -
> > - /* if format doesn't have alpha, fix blend mode to PIXEL_NONE */
> > - dflow->pixel_blend_mode = fb->format->has_alpha ?
> > - st->pixel_blend_mode : DRM_MODE_BLEND_PIXEL_NONE;
> > + dflow->pixel_blend_mode = st->pixel_blend_mode;
> > dflow->layer_alpha = st->alpha >> 8;
> >
> > dflow->out_x = st->crtc_x;
> > @@ -46,9 +43,10 @@ komeda_plane_init_data_flow(struct drm_plane_state *st,
> > fb->modifier));
> > return -EINVAL;
> > }
> > +
> > dflow->needs_img_enhancement = kplane_st->img_enhancement;
> >
> > - komeda_complete_data_flow_cfg(dflow);
> > + komeda_complete_data_flow_cfg(dflow, fb);
> >
> > return 0;
> > }
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > index eed521218ef3..20295291572f 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > @@ -31,7 +31,7 @@ komeda_wb_init_data_flow(struct komeda_layer *wb_layer,
> > dflow->pixel_blend_mode = DRM_MODE_BLEND_PIXEL_NONE;
> > dflow->rot = DRM_MODE_ROTATE_0;
> >
> > - komeda_complete_data_flow_cfg(dflow);
> > + komeda_complete_data_flow_cfg(dflow, fb);
> >
> > return 0;
> > }
> > --
> > 2.17.1
> >
>
> Otherwise: Reviewed-by: Liviu Dudau <liviu.dudau@....com>
>
> Best regards,
> Liviu
>
>
> --
> ====================
> | I would like to |
> | fix the world, |
> | but they're not |
> | giving me the |
> \ source code! /
> ---------------
> ¯\_(ツ)_/¯
Powered by blists - more mailing lists