linux-kernel - [PATCH v3 6/7] ARM: defconfig: enable cpufreq driver for RPi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190611175839.28351-7-nsaenzjulienne@suse.de>
Date:   Tue, 11 Jun 2019 19:58:44 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     stefan.wahren@...e.com, Eric Anholt <eric@...olt.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com
Cc:     mbrugger@...e.de, viresh.kumar@...aro.org, rjw@...ysocki.net,
        sboyd@...nel.org, ptesarik@...e.com,
        linux-rpi-kernel@...ts.infradead.org, ssuloev@...altech.com,
        linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        mturquette@...libre.com, linux-pm@...r.kernel.org,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Russell King <linux@...linux.org.uk>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 6/7] ARM: defconfig: enable cpufreq driver for RPi

This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.

In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---

Changes since v2:
  - Change default governor to conservative in bcm2835_defconfig
  - Set all as builtin in bcm2835_defconfig

 arch/arm/configs/bcm2835_defconfig  | 9 +++++++++
 arch/arm/configs/multi_v7_defconfig | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index dcf7610cfe55..519ff58e67b3 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -37,6 +37,14 @@ CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_VFP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
@@ -132,6 +140,7 @@ CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
 CONFIG_SND_BCM2835=m
 CONFIG_VIDEO_BCM2835=m
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_MAILBOX=y
 CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6b748f214eae..0fd60a83f768 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -102,6 +102,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
@@ -899,6 +900,7 @@ CONFIG_STAGING_BOARD=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_QCOM_CLK_RPM=y
 CONFIG_APQ_MMCC_8084=y
-- 
2.21.0