linux-kernel - [PATCH v2 02/10] dt-bindings: serial: add optional pinctrl states

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1560255930-22554-3-git-send-email-erwan.leray@st.com>
Date:   Tue, 11 Jun 2019 14:25:22 +0200
From:   Erwan Le Ray <erwan.leray@...com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jslaby@...e.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        "Alexandre Torgue" <alexandre.torgue@...com>,
        Rob Herring <robh+dt@...nel.org>,
        "Mark Rutland" <mark.rutland@....com>
CC:     <linux-serial@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        Erwan Le Ray <erwan.leray@...com>,
        "Fabrice Gasnier" <fabrice.gasnier@...com>,
        Bich Hemon <bich.hemon@...com>
Subject: [PATCH v2 02/10] dt-bindings: serial: add optional pinctrl states

From: Bich Hemon <bich.hemon@...com>

Add options for pinctrl states:
- "sleep" for low power
- "idle" for low power and wakeup capabilities enabled
- "no_console_suspend" for enabling console messages in low power

Signed-off-by: Bich Hemon <bich.hemon@...com>
Signed-off-by: Erwan Le Ray <erwan.leray@...com>

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 5ec80c1..64a5ea9 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -13,7 +13,14 @@ Required properties:
 - clocks: The input clock of the USART instance
 
 Optional properties:
-- pinctrl: The reference on the pins configuration
+- pinctrl-names: Set to "default". An additional "sleep" state can be defined
+  to set pins in sleep state when in low power. In case the device is used as
+  a wakeup source, "idle" state is defined in order to keep RX pin active.
+  For a console device, an optional state "no_console_suspend" can be defined
+  to enable console messages during suspend. Typically, "no_console_suspend" and
+  "default" states can refer to the same pin configuration.
+- pinctrl-n: Phandle(s) pointing to pin configuration nodes.
+  For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
 - st,hw-flow-ctrl: bool flag to enable hardware flow control.
 - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low,
   linux,rs485-enabled-at-boot-time: see rs485.txt.
@@ -31,8 +38,11 @@ usart4: serial@...04c00 {
 	reg = <0x40004c00 0x400>;
 	interrupts = <52>;
 	clocks = <&clk_pclk1>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
 	pinctrl-0 = <&pinctrl_usart4>;
+	pinctrl-1 = <&pinctrl_usart4_sleep>;
+	pinctrl-2 = <&pinctrl_usart4_idle>;
+	pinctrl-3 = <&pinctrl_usart4>;
 };
 
 usart2: serial@...04400 {
-- 
1.9.1