| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190612085238.1763-2-peda@axentia.se>
Date: Wed, 12 Jun 2019 08:52:56 +0000
From: Peter Rosin <peda@...ntia.se>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Pankaj Bansal <pankaj.bansal@....com>,
Peter Rosin <peda@...ntia.se>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: [RESEND PATCH 1/2] dt-bindings: add register based devices' mux
controller DT bindings
From: Pankaj Bansal <pankaj.bansal@....com>
This adds device tree binding documentation for generic register based
multiplexer controlled by a bitfields in a parent device's register range.
since MMIO mux is a special case of generic register based mux, the
MMIO mux bindings have been subsumed in these bindings.
Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
Signed-off-by: Peter Rosin <peda@...ntia.se>
---
Documentation/devicetree/bindings/mux/mmio-mux.txt | 60 ----------
Documentation/devicetree/bindings/mux/reg-mux.txt | 129 +++++++++++++++++++++
2 files changed, 129 insertions(+), 60 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mux/mmio-mux.txt
create mode 100644 Documentation/devicetree/bindings/mux/reg-mux.txt
diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt
deleted file mode 100644
index a9bfb4d8b6ac..000000000000
--- a/Documentation/devicetree/bindings/mux/mmio-mux.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-MMIO register bitfield-based multiplexer controller bindings
-
-Define register bitfields to be used to control multiplexers. The parent
-device tree node must be a syscon node to provide register access.
-
-Required properties:
-- compatible : "mmio-mux"
-- #mux-control-cells : <1>
-- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
- pairs, each describing a single mux control.
-* Standard mux-controller bindings as decribed in mux-controller.txt
-
-Optional properties:
-- idle-states : if present, the state the muxes will have when idle. The
- special state MUX_IDLE_AS_IS is the default.
-
-The multiplexer state of each multiplexer is defined as the value of the
-bitfield described by the corresponding register offset and bitfield mask pair
-in the mux-reg-masks array, accessed through the parent syscon.
-
-Example:
-
- syscon {
- compatible = "syscon";
-
- mux: mux-controller {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
-
- mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
- <0x3 0x40>, /* 1: reg 0x3, bit 6 */
- idle-states = <MUX_IDLE_AS_IS>, <0>;
- };
- };
-
- video-mux {
- compatible = "video-mux";
- mux-controls = <&mux 0>;
-
- ports {
- /* inputs 0..3 */
- port@0 {
- reg = <0>;
- };
- port@1 {
- reg = <1>;
- };
- port@2 {
- reg = <2>;
- };
- port@3 {
- reg = <3>;
- };
-
- /* output */
- port@4 {
- reg = <4>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.txt b/Documentation/devicetree/bindings/mux/reg-mux.txt
new file mode 100644
index 000000000000..4afd7ba73d60
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/reg-mux.txt
@@ -0,0 +1,129 @@
+Generic register bitfield-based multiplexer controller bindings
+
+Define register bitfields to be used to control multiplexers. The parent
+device tree node must be a device node to provide register r/w access.
+
+Required properties:
+- compatible : should be one of
+ "reg-mux" : if parent device of mux controller is not syscon device
+ "mmio-mux" : if parent device of mux controller is syscon device
+- #mux-control-cells : <1>
+- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
+ pairs, each describing a single mux control.
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- idle-states : if present, the state the muxes will have when idle. The
+ special state MUX_IDLE_AS_IS is the default.
+
+The multiplexer state of each multiplexer is defined as the value of the
+bitfield described by the corresponding register offset and bitfield mask
+pair in the mux-reg-masks array.
+
+Example 1:
+The parent device of mux controller is not a syscon device.
+
+&i2c0 {
+ fpga@66 { // fpga connected to i2c
+ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+ "simple-mfd";
+ reg = <0x66>;
+
+ mux: mux-controller {
+ compatible = "reg-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+ <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+ };
+ };
+};
+
+mdio-mux-1 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 0>;
+ mdio-parent-bus = <&emdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@8 {
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
+
+mdio-mux-2 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 1>;
+ mdio-parent-bus = <&emdio2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
+
+Example 2:
+The parent device of mux controller is syscon device.
+
+syscon {
+ compatible = "syscon";
+
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+
+ mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
+ <0x3 0x40>, /* 1: reg 0x3, bit 6 */
+ idle-states = <MUX_IDLE_AS_IS>, <0>;
+ };
+};
+
+video-mux {
+ compatible = "video-mux";
+ mux-controls = <&mux 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ /* inputs 0..3 */
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ reg = <2>;
+ };
+ port@3 {
+ reg = <3>;
+ };
+
+ /* output */
+ port@4 {
+ reg = <4>;
+ };
+ };
+};
--
2.11.0
Powered by blists - more mailing lists