[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1560433800-12255-8-git-send-email-erwan.leray@st.com>
Date: Thu, 13 Jun 2019 15:49:57 +0200
From: Erwan Le Ray <erwan.leray@...com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
"Alexandre Torgue" <alexandre.torgue@...com>,
Rob Herring <robh+dt@...nel.org>,
"Mark Rutland" <mark.rutland@....com>
CC: <linux-serial@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Erwan Le Ray <erwan.leray@...com>,
"Fabrice Gasnier" <fabrice.gasnier@...com>,
Bich Hemon <bich.hemon@...com>
Subject: [PATCH v3 07/10] ARM: dts: stm32: update uart4 pin configurations for low power
Currently, pinctrl states defines only one "sleep" configuration for pins,
no matter the possible uart low power modes (Rx pin always kept active).
Sleep pin configuration is refined for low power modes:
- "sleep" (no wakeup & console suspend enabled): put pins in analog state
to optimize power
- "idle" (wakeup capability): keep Rx pin in alternate function
- "default" state remains untouched, to be used while the UART is active
or in case the no_console_suspend mode is enabled
Signed-off-by: Bich Hemon <bich.hemon@...com>
Signed-off-by: Erwan Le Ray <erwan.leray@...com>
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 85c417d..2e1ab1b 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -599,6 +599,23 @@
bias-disable;
};
};
+
+ uart4_idle_pins_a: uart4-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_sleep_pins_a: uart4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+ };
};
pinctrl_z: pin-controller-z@...04000 {
--
1.9.1
Powered by blists - more mailing lists