[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20190613195903.GA23650@bogus>
Date: Thu, 13 Jun 2019 13:59:03 -0600
From: Rob Herring <robh@...nel.org>
To: allen <allen.chen@....com.tw>
Cc: Pi-Hsun Shih <pihsun@...omium.org>,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <treding@...dia.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Michal Vokáč <michal.vokac@...ft.com>,
Johan Hovold <johan@...nel.org>,
Nickey Yang <nickey.yang@...k-chips.com>,
Michal Simek <monstr@...str.eu>,
Linus Walleij <linus.walleij@...aro.org>,
Ben Whitten <ben.whitten@...il.com>,
"open list:DRM DRIVERS" <dri-devel@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/3] dt-bindings: Add binding for IT6505.
On Wed, May 08, 2019 at 05:31:56PM +0800, allen wrote:
> From: Allen Chen <allen.chen@....com.tw>
>
> Add a DT binding documentation for IT6505.
>
> Signed-off-by: Allen Chen <allen.chen@....com.tw>
>
> ---
> .../bindings/display/bridge/ite,it6505.txt | 30 ++++++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> 2 files changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
> new file mode 100644
> index 0000000..c3506ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
> @@ -0,0 +1,30 @@
> +iTE it6505 DP bridge bindings
> +
> +Required properties:
> + - compatible: "ite,it6505"
> + - reg: i2c address of the bridge
> + - ovdd-supply: I/O voltage
> + - pwr18-supply: Core voltage
> + - interrupts: interrupt specifier of INT pin
> + - reset-gpios: gpio specifier of RESET pin
> +
> +Example:
> + it6505dptx: it6505dptx@5c {
> + compatible = "ite,it6505";
> + status = "okay";
> + interrupt-parent = <&pio>;
> + interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
> + reg = <0x5c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&it6505_pins>;
> + ovdd-supply = <&mt6358_vsim1_reg>;
> + pwr18-supply = <&it6505_pp18_reg>;
> + reset-gpios = <&pio 179 1>;
> + hpd-gpios = <&pio 9 0>;
HPD would be part of the connector, not this bridge chip if a GPIO is
used.
> + extcon = <&usbc_extcon>;
This should use the usb-connector binding if this is a Type C connector.
Or it should have a dp-connector node connection if just a DP connector.
> + port {
> + it6505_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 2c3fc51..c088646 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -184,6 +184,7 @@ iom Iomega Corporation
> isee ISEE 2007 S.L.
> isil Intersil
> issi Integrated Silicon Solutions Inc.
> +ite iTE Tech. Inc.
This file is a schema now, so you'll have to update this.
> itead ITEAD Intelligent Systems Co.Ltd
> iwave iWave Systems Technologies Pvt. Ltd.
> jdi Japan Display Inc.
> --
> 1.9.1
>
Powered by blists - more mailing lists