linux-kernel - [PATCH v3 1/7] drivers: regulator: qcom

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190613142231.8728-1-jeffrey.l.hugo@gmail.com>
Date:   Thu, 13 Jun 2019 07:22:31 -0700
From:   Jeffrey Hugo <jeffrey.l.hugo@...il.com>
To:     lgirdwood@...il.com, broonie@...nel.org
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
        mark.rutland@....com, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>,
        Jeffrey Hugo <jeffrey.l.hugo@...il.com>
Subject: [PATCH v3 1/7] drivers: regulator: qcom_spmi: enable linear range info

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@...il.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 53a61fb65642..fd55438c25d6 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1744,6 +1744,7 @@ MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
 static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 {
 	const struct spmi_regulator_data *reg;
+	const struct spmi_voltage_range *range;
 	const struct of_device_id *match;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -1833,6 +1834,12 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 			}
 		}
 
+		if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_HFS430) {
+			/* since there is only one range */
+			range = spmi_regulator_find_range(vreg);
+			vreg->desc.uV_step = range->step_uV;
+		}
+
 		config.dev = dev;
 		config.driver_data = vreg;
 		config.regmap = regmap;
-- 
2.17.1