linux-kernel - Re: msm8996: qcom-qmp: apq8096-db820c fails to boot, reset back to fastboot and locks up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8cc440fd-9fd2-97a6-42e1-0a0b9c456d10@free.fr>
Date:   Thu, 13 Jun 2019 11:19:28 +0200
From:   Marc Gonzalez <marc.w.gonzalez@...e.fr>
To:     Paolo Pisati <p.pisati@...il.com>
Cc:     MSM <linux-arm-msm@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Niklas Cassel <niklas.cassel@...aro.org>,
        Stanimir Varbanov <svarbanov@...sol.com>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: Re: msm8996: qcom-qmp: apq8096-db820c fails to boot, reset back to
 fastboot and locks up

On 10/06/2019 15:44, Paolo Pisati wrote:

> From time to time, my apq8096-db820c fails to boot to userspace, reset back to
> fastboot and locks up: to easily reproduce the issue, i'm boot looping using a
> cron job with a 1 min reboot entry on the board while leaving a "while 1; do
> fastboot boot boot.img; done" on the host pc.
> 
> The issue is present in mainline up to 5.2-rc4, using defconfig and:
> 
> CONFIG_SCSI_UFS_QCOM=y
> CONFIG_PHY_QCOM_QMP=y
> CONFIG_PHY_QCOM_UFS=y
> 
> but was present in previous releases too (e.g. 4.14., 4.19, etc qcom-lt or
> mainline), where it's even easier to reproduce (e.g. takes way less reboots to
> trigger it).
> 
> These are the last lines printed out:
> ...
> [    7.407209] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
> [    7.448058] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
> [    7.461859] ufs_qcom_phy_qmp_14nm 627000.phy: invalid resource
> [    7.535434] qcom-qmp-phy 34000.phy: phy common block init timed-out
> [    7.538596] phy phy-34000.phy.0: phy init failed --> -110
> [    7.550891] qcom-pcie: probe of 600000.pcie failed with error -110
> [    7.619008] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found,
> using dummy regulator
> 
> Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
> S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
> S - IMAGE_VARIANT_STRING=M8996LAB
> S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
> S - Boot Interface: UFS
> S - Secure Boot: Off
> ...
> 
> Full boot here: https://pastebin.ubuntu.com/p/rtjVrD3yzk/
> 
> Any idea what is going on? Am i doing something wrong?

Hmmm... this might be related to:

https://patchwork.kernel.org/patch/10976217/

Regards.