| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPUE2uvONxJN7MdUKU-tCx59kd+x+pbYqPH8fLKbSp4_cvSzJg@mail.gmail.com>
Date: Fri, 14 Jun 2019 14:54:24 -0700
From: Gwendal Grignou <gwendal@...omium.org>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Benson Leung <bleung@...omium.org>,
Guenter Roeck <groeck@...omium.org>,
Lee Jones <lee.jones@...aro.org>, linux-iio@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v7 2/2] iio: cros_ec: Add lid angle driver
On Sat, May 18, 2019 at 2:53 AM Jonathan Cameron <jic23@...nel.org> wrote:
>
> On Fri, 17 May 2019 16:38:56 -0700
> Gwendal Grignou <gwendal@...omium.org> wrote:
>
> > Add a IIO driver that reports the angle between the lid and the base for
> > ChromeOS convertible device.
> >
> > Tested on eve with ToT EC firmware.
> > Check driver is loaded and lid angle is correct.
> >
> > Signed-off-by: Gwendal Grignou <gwendal@...omium.org>
> Hi Gwendal.
>
> Please do list dependencies in patches. I think this one is still
> dependent on the larger set of MFD changes.
>
> For my reference
>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
>
> Please do poke if this seems to have gotten lost once the precursors
> are upstream.
The large set of MFD changes for update cros_ec_commands.h has landed
in a immutable branch:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git branch
ib-mfd-cros-5.3.
Thanks,
Gwendal.
>
> Thanks,
>
> Jonathan
>
> > ---
> > Changes in v7:
> > - Split patch in two: This is the IIO section.
> >
> > Changes in v6:
> > - Fix lock held in an error path error.
> >
> > Changes in v5:
> > - Remove unnecessary define.
> > - v4 was the wrong patch file
> >
> > Changes in v3:
> > - Use static channel array, simplify code because index is always 0.
> >
> > Changes in v2:
> > - Fix license, remove driver_module field.
> >
> > drivers/iio/common/cros_ec_sensors/Kconfig | 9 ++
> > drivers/iio/common/cros_ec_sensors/Makefile | 1 +
> > .../cros_ec_sensors/cros_ec_lid_angle.c | 139 ++++++++++++++++++
> > 3 files changed, 149 insertions(+)
> > create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> >
> > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> > index 135f6825903f..aacc2ab9c34f 100644
> > --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
> > Accelerometers, Gyroscope and Magnetometer that are
> > presented by the ChromeOS EC Sensor hub.
> > Creates an IIO device for each functions.
> > +
> > +config IIO_CROS_EC_SENSORS_LID_ANGLE
> > + tristate "ChromeOS EC Sensor for lid angle"
> > + depends on IIO_CROS_EC_SENSORS_CORE
> > + help
> > + Module to report the angle between lid and base for some
> > + convertible devices.
> > + This module is loaded when the EC can calculate the angle between the base
> > + and the lid.
> > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> > index ec716ff2a775..a35ee232ac07 100644
> > --- a/drivers/iio/common/cros_ec_sensors/Makefile
> > +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> > @@ -4,3 +4,4 @@
> >
> > obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
> > obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
> > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > new file mode 100644
> > index 000000000000..876dfd176b0e
> > --- /dev/null
> > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > @@ -0,0 +1,139 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +/*
> > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
> > + *
> > + * Copyright 2018 Google, Inc
> > + *
> > + * This driver uses the cros-ec interface to communicate with the Chrome OS
> > + * EC about counter sensors. Counters are presented through
> > + * iio sysfs.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/common/cros_ec_sensors_core.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/kfifo_buf.h>
> > +#include <linux/iio/trigger.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#include <linux/iio/trigger_consumer.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/cros_ec.h>
> > +#include <linux/mfd/cros_ec_commands.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#define DRV_NAME "cros-ec-lid-angle"
> > +
> > +/*
> > + * One channel for the lid angle, the other for timestamp.
> > + */
> > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
> > + {
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > + .scan_type.realbits = CROS_EC_SENSOR_BITS,
> > + .scan_type.storagebits = CROS_EC_SENSOR_BITS,
> > + .scan_type.sign = 'u',
> > + .type = IIO_ANGL
> > + },
> > + IIO_CHAN_SOFT_TIMESTAMP(1)
> > +};
> > +
> > +/* State data for ec_sensors iio driver. */
> > +struct cros_ec_lid_angle_state {
> > + /* Shared by all sensors */
> > + struct cros_ec_sensors_core_state core;
> > +};
> > +
> > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
> > + unsigned long scan_mask, s16 *data)
> > +{
> > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> > + int ret;
> > +
> > + st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
> > + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
> > + if (ret) {
> > + dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
> > + return ret;
> > + }
> > +
> > + *data = st->resp->lid_angle.value;
> > + return 0;
> > +}
> > +
> > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
> > + s16 data;
> > + int ret;
> > +
> > + mutex_lock(&st->core.cmd_lock);
> > + ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
> > + if (ret == 0) {
> > + *val = data;
> > + ret = IIO_VAL_INT;
> > + }
> > + mutex_unlock(&st->core.cmd_lock);
> > + return ret;
> > +}
> > +
> > +static const struct iio_info cros_ec_lid_angle_info = {
> > + .read_raw = &cros_ec_lid_angle_read,
> > +};
> > +
> > +static int cros_ec_lid_angle_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct iio_dev *indio_dev;
> > + struct cros_ec_lid_angle_state *state;
> > + int ret;
> > +
> > + indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
> > + if (ret)
> > + return ret;
> > +
> > + indio_dev->info = &cros_ec_lid_angle_info;
> > + state = iio_priv(indio_dev);
> > + indio_dev->channels = cros_ec_lid_angle_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
> > +
> > + state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
> > +
> > + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > + cros_ec_sensors_capture, NULL);
> > + if (ret)
> > + return ret;
> > +
> > + return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> > +static const struct platform_device_id cros_ec_lid_angle_ids[] = {
> > + {
> > + .name = DRV_NAME,
> > + },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
> > +
> > +static struct platform_driver cros_ec_lid_angle_platform_driver = {
> > + .driver = {
> > + .name = DRV_NAME,
> > + .pm = &cros_ec_sensors_pm_ops,
> > + },
> > + .probe = cros_ec_lid_angle_probe,
> > + .id_table = cros_ec_lid_angle_ids,
> > +};
> > +module_platform_driver(cros_ec_lid_angle_platform_driver);
> > +
> > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
> > +MODULE_LICENSE("GPL v2");
>
Powered by blists - more mailing lists