linux-kernel - Re: [PATCH 2/2] arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <31ea68c3-0f37-a755-775a-7180ff6747f5@baylibre.com>
Date:   Fri, 14 Jun 2019 11:20:31 +0200
From:   Neil Armstrong <narmstrong@...libre.com>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        linux-amlogic@...ts.infradead.org, khilman@...libre.com
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: meson: g12a: x96-max: add the Ethernet
 PHY interrupt line

On 10/06/2019 18:45, Martin Blumenstingl wrote:
> X96 Max has the PHY reset and interrupt lines are identical to the
> Odroid-N2:
> - GPIOZ_14 is the interrupt on X96 Max
> - GPIOZ_15 is the reset line on X96 Max
> 
> Add GPIOZ_14 as PHY interrupt line on the X96 Max so we don't have to
> poll for the PHY status.
> 
> Suggested-by: Neil Armstrong <narmstrong@...libre.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 24956edaf8e2..e3f3f37d3081 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -180,6 +180,10 @@
>  		reset-assert-us = <10000>;
>  		reset-deassert-us = <10000>;
>  		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
> +
> +		interrupt-parent = <&gpio_intc>;
> +		/* MAC_INTR on GPIOZ_14 */
> +		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
>  	};
>  };
>  
> 


[   46.844307] RTL8211F Gigabit Ethernet 0.0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.0:00, irq=28)

# cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3
...
 28:          5          0          0          0  meson-gpio-irqchip  26 Level     0.0:00
...


Acked-by: Neil Armstrong <narmstrong@...libre.com>
Tested-by: Neil Armstrong <narmstrong@...libre.com>