linux-kernel - [PATCH 0/6] net: macb patch set cover letter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1560642311-25585-1-git-send-email-pthombar@cadence.com>
Date:   Sun, 16 Jun 2019 00:45:11 +0100
From:   Parshuram Thombare <pthombar@...ence.com>
To:     <andrew@...n.ch>, <nicolas.ferre@...rochip.com>,
        <davem@...emloft.net>, <f.fainelli@...il.com>
CC:     <netdev@...r.kernel.org>, <hkallweit1@...il.com>,
        <linux-kernel@...r.kernel.org>, <rafalc@...ence.com>,
        <aniljoy@...ence.com>, <piotrs@...ence.com>, <pthombar@...ence.com>
Subject: [PATCH 0/6] net: macb patch set cover letter

Hello !,

This is second version of patch set containing following patches
for Cadence ethernet controller driver.

1. 0001-net-macb-add-phylink-support.patch
   Replace phylib API's with phylink API's.
2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
   This patch add support for SGMII mode.
3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch
   This patch is to configure TI PHY DP83867 in SGMII mode from
   our MAC PCI wrapper driver. 
   With this change there is no need of PHY driver and dp83867
   module must be disabled. Users wanting to setup DP83867 PHY	
   in SGMII mode can disable dp83867.ko driver, else dp83867.ko
   overwrite this configuration and PHY is setup as per dp83867.ko.
4. 0004-net-macb-add-support-for-c45-PHY.patch
   This patch is to support C45 PHY.
5. 0005-net-macb-add-support-for-high-speed-interface
   This patch add support for 10G USXGMII PCS in fixed mode.
   Since emulated PHY used in fixed mode doesn't seems to
   support anything above 1G, additional parameter is used outside
   "fixed-link" node for selecting speed and "fixed-link"
   node speed is still set at 1G.
6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
   New parameters added to Cadence ethernet controller DT binding
   for USXGMII interface.

Regards,
Parshuram Thombare

Parshuram Thombare (6):
  net: macb: add phylink support
  net: macb: add support for sgmii MAC-PHY interface
  net: macb: add PHY configuration in MACB PCI wrapper
  net: macb: add support for c45 PHY
  net: macb: add support for high speed interface
  net: macb: parameter added to cadence ethernet controller DT binding

 .../devicetree/bindings/net/macb.txt          |   4 +
 drivers/net/ethernet/cadence/Kconfig          |   2 +-
 drivers/net/ethernet/cadence/macb.h           | 136 +++-
 drivers/net/ethernet/cadence/macb_main.c      | 659 ++++++++++++++----
 drivers/net/ethernet/cadence/macb_pci.c       | 225 ++++++
 5 files changed, 860 insertions(+), 166 deletions(-)

-- 
2.17.1