[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1560764090-22740-1-git-send-email-neeraju@codeaurora.org>
Date: Mon, 17 Jun 2019 15:04:50 +0530
From: Neeraj Upadhyay <neeraju@...eaurora.org>
To: bjorn.andersson@...aro.org, sboyd@...eaurora.org,
linus.walleij@...aro.org, timur@...eaurora.org
Cc: linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Srinivas Ramana <sramana@...eaurora.org>,
Neeraj Upadhyay <neeraju@...eaurora.org>
Subject: [PATCH v2] pinctrl: qcom: Add irq_enable callback for msm gpio
From: Srinivas Ramana <sramana@...eaurora.org>
Introduce the irq_enable callback which will be same as irq_unmask
except that it will also clear the status bit before unmask.
This will help in clearing any erroneous interrupts that would
have got latched when the interrupt is not in use.
There may be devices like UART which can use the same gpio line
for data rx as well as a wakeup gpio when in suspend. The data that
was flowing on the line may latch the interrupt and when we enable
the interrupt before going to suspend, this would trigger the
unexpected interrupt. This change helps clearing the interrupt
so that these unexpected interrupts gets cleared.
Signed-off-by: Srinivas Ramana <sramana@...eaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@...eaurora.org>
---
Changes since v1:
- Extracted common code into __msm_gpio_irq_unmask().
drivers/pinctrl/qcom/pinctrl-msm.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 6e319bc..2a127f0 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -729,7 +729,7 @@ static void msm_gpio_irq_mask(struct irq_data *d)
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
-static void msm_gpio_irq_unmask(struct irq_data *d)
+static void __msm_gpio_irq_unmask(struct irq_data *d, bool status_clear)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
@@ -741,6 +741,17 @@ static void msm_gpio_irq_unmask(struct irq_data *d)
raw_spin_lock_irqsave(&pctrl->lock, flags);
+ if (status_clear) {
+ /*
+ * clear the interrupt status bit before unmask to avoid
+ * any erroneous interrupts that would have got latched
+ * when the interrupt is not in use.
+ */
+ val = msm_readl_intr_status(pctrl, g);
+ val &= ~BIT(g->intr_status_bit);
+ msm_writel_intr_status(val, pctrl, g);
+ }
+
val = msm_readl_intr_cfg(pctrl, g);
val |= BIT(g->intr_raw_status_bit);
val |= BIT(g->intr_enable_bit);
@@ -751,6 +762,17 @@ static void msm_gpio_irq_unmask(struct irq_data *d)
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
+static void msm_gpio_irq_enable(struct irq_data *d)
+{
+
+ __msm_gpio_irq_unmask(d, true);
+}
+
+static void msm_gpio_irq_unmask(struct irq_data *d)
+{
+ __msm_gpio_irq_unmask(d, false);
+}
+
static void msm_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -978,6 +1000,7 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
chip->need_valid_mask = msm_gpio_needs_valid_mask(pctrl);
pctrl->irq_chip.name = "msmgpio";
+ pctrl->irq_chip.irq_enable = msm_gpio_irq_enable;
pctrl->irq_chip.irq_mask = msm_gpio_irq_mask;
pctrl->irq_chip.irq_unmask = msm_gpio_irq_unmask;
pctrl->irq_chip.irq_ack = msm_gpio_irq_ack;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member of the Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists