[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190617154614.wlbh6dtj54brkt67@kahuna>
Date: Mon, 17 Jun 2019 10:46:14 -0500
From: Nishanth Menon <nm@...com>
To: Rob Herring <robh@...nel.org>
CC: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Santosh Shilimkar <ssantosh@...nel.org>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>,
<linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
Tero Kristo <t-kristo@...com>
Subject: Re: [PATCH 1/6] dt-bindings: arm: ti: Add bindings for J721E SoC
On 10:45-20190614, Rob Herring wrote:
> On Wed, May 22, 2019 at 11:19:16AM -0500, Nishanth Menon wrote:
> > The J721E SoC belongs to the K3 Multicore SoC architecture platform,
> > providing advanced system integration to enable lower system costs
> > of automotive applications such as infotainment, cluster, premium
> > Audio, Gateway, industrial and a range of broad market applications.
> > This SoC is designed around reducing the system cost by eliminating
> > the need of an external system MCU and is targeted towards ASIL-B/C
> > certification/requirements in addition to allowing complex software
> > and system use-cases.
> >
> > Some highlights of this SoC are:
> > * Dual Cortex-A72s in a single cluster, three clusters of lockstep
> > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
> > C7x floating point Vector DSP, Two C66x floating point DSPs.
> > * 3D GPU PowerVR Rogue 8XE GE8430
> > * Vision Processing Accelerator (VPAC) with image signal processor and Depth
> > and Motion Processing Accelerator (DMPAC)
> > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
> > PRUs and dual RTUs
> > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
> > up to two DPI interfaces.
> > * Integrated Ethernet switch supporting up to a total of 8 external ports in
> > addition to legacy Ethernet switch of up to 2 ports.
> > * System MMU (SMMU) Version 3.0 and advanced virtualisation
> > capabilities.
> > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
> > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
> > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
> > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
> > management.
> > * Configurable L3 Cache and IO-coherent architecture with high data throughput
> > capable distributed DMA architecture under NAVSS
> > * Centralized System Controller for Security, Power, and Resource
> > Management (DMSC)
> >
> > See J721E Technical Reference Manual (SPRUIL1, May 2019)
> > for further details: http://www.ti.com/lit/pdf/spruil1
> >
> > Signed-off-by: Nishanth Menon <nm@...com>
> > ---
> > Documentation/devicetree/bindings/arm/ti/k3.txt | 3 +++
> > 1 file changed, 3 insertions(+)
>
> Okay for now, but please convert K3 and other TI SoCs to schema soon.
>
> Reviewed-by: Rob Herring <robh@...nel.org>
Thanks Rob. Will do the change to rst soon (hopefully post in the 5.3 window).
--
Regards,
Nishanth Menon
Powered by blists - more mailing lists