| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190618204202.GE25413@art_vandelay>
Date: Tue, 18 Jun 2019 16:42:02 -0400
From: Sean Paul <sean@...rly.run>
To: Rob Clark <robdclark@...il.com>
Cc: dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
Sean Paul <seanpaul@...omium.org>,
Georgi Djakov <georgi.djakov@...aro.org>,
Jayant Shekhar <jshekhar@...eaurora.org>,
Sravanthi Kollukuduru <skolluku@...eaurora.org>,
Rob Clark <robdclark@...omium.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Jordan Crouse <jcrouse@...eaurora.org>,
Jeykumar Sankaran <jsanka@...eaurora.org>,
Stephen Boyd <swboyd@...omium.org>,
Abhinav Kumar <abhinavk@...eaurora.org>,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/5] drm/msm/dpu: Integrate interconnect API in MDSS
On Tue, Jun 18, 2019 at 01:24:10PM -0700, Rob Clark wrote:
> From: Jayant Shekhar <jshekhar@...eaurora.org>
>
> The interconnect framework is designed to provide a
> standard kernel interface to control the settings of
> the interconnects on a SoC.
>
> The interconnect API uses a consumer/provider-based model,
> where the providers are the interconnect buses and the
> consumers could be various drivers.
>
> MDSS is one of the interconnect consumers which uses the
> interconnect APIs to get the path between endpoints and
> set its bandwidth requirement for the given interconnected
> path.
>
> Changes in v2:
> - Remove error log and unnecessary check (Jordan Crouse)
>
> Changes in v3:
> - Code clean involving variable name change, removal
> of extra paranthesis and variables (Matthias Kaehlcke)
>
> Changes in v4:
> - Add comments, spacings, tabs, proper port name
> and icc macro (Georgi Djakov)
>
> Changes in v5:
> - Commit text and parenthesis alignment (Georgi Djakov)
>
> Changes in v6:
> - Change to new icc_set API's (Doug Anderson)
>
> Changes in v7:
> - Fixed a typo
>
> Changes in v8:
> - Handle the of_icc_get() returning NULL case. In practice
> icc_set_bw() will gracefully handle the case of a NULL path,
> but it's probably best for clarity to keep num_paths=0 in
> this case.
>
> Signed-off-by: Sravanthi Kollukuduru <skolluku@...eaurora.org>
> Signed-off-by: Jayant Shekhar <jshekhar@...eaurora.org>
> Signed-off-by: Rob Clark <robdclark@...omium.org>
> Acked-by: Georgi Djakov <georgi.djakov@...aro.org>
Reviewed-by: Sean Paul <sean@...rly.run>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 ++++++++++++++++++++++--
> 1 file changed, 45 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index 7316b4ab1b85..b1d0437ac7b6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -4,11 +4,15 @@
> */
>
> #include "dpu_kms.h"
> +#include <linux/interconnect.h>
>
> #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
>
> #define HW_INTR_STATUS 0x0010
>
> +/* Max BW defined in KBps */
> +#define MAX_BW 6800000
> +
> struct dpu_irq_controller {
> unsigned long enabled_mask;
> struct irq_domain *domain;
> @@ -21,8 +25,30 @@ struct dpu_mdss {
> u32 hwversion;
> struct dss_module_power mp;
> struct dpu_irq_controller irq_controller;
> + struct icc_path *path[2];
> + u32 num_paths;
> };
>
> +static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
> + struct dpu_mdss *dpu_mdss)
> +{
> + struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
> + struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
> +
> + if (IS_ERR_OR_NULL(path0))
> + return PTR_ERR_OR_ZERO(path0);
> +
> + dpu_mdss->path[0] = path0;
> + dpu_mdss->num_paths = 1;
> +
> + if (!IS_ERR_OR_NULL(path1)) {
> + dpu_mdss->path[1] = path1;
> + dpu_mdss->num_paths++;
> + }
> +
> + return 0;
> +}
> +
> static void dpu_mdss_irq(struct irq_desc *desc)
> {
> struct dpu_mdss *dpu_mdss = irq_desc_get_handler_data(desc);
> @@ -134,7 +160,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
> + u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
> +
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
> if (ret)
> @@ -147,12 +177,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
> if (ret)
> DPU_ERROR("clock disable failed, ret:%d\n", ret);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set_bw(dpu_mdss->path[i], 0, 0);
> +
> return ret;
> }
>
> @@ -163,6 +196,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> int irq;
> + int i;
>
> pm_runtime_suspend(dev->dev);
> pm_runtime_disable(dev->dev);
> @@ -172,6 +206,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> msm_dss_put_clk(mp->clk_config, mp->num_clk);
> devm_kfree(&pdev->dev, mp->clk_config);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_put(dpu_mdss->path[i]);
> +
> if (dpu_mdss->mmio)
> devm_iounmap(&pdev->dev, dpu_mdss->mmio);
> dpu_mdss->mmio = NULL;
> @@ -211,6 +248,10 @@ int dpu_mdss_init(struct drm_device *dev)
> }
> dpu_mdss->mmio_len = resource_size(res);
>
> + ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
> + if (ret)
> + return ret;
> +
> mp = &dpu_mdss->mp;
> ret = msm_dss_parse_clock(pdev, mp);
> if (ret) {
> @@ -232,14 +273,14 @@ int dpu_mdss_init(struct drm_device *dev)
> irq_set_chained_handler_and_data(irq, dpu_mdss_irq,
> dpu_mdss);
>
> + priv->mdss = &dpu_mdss->base;
> +
> pm_runtime_enable(dev->dev);
>
> pm_runtime_get_sync(dev->dev);
> dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
> pm_runtime_put_sync(dev->dev);
>
> - priv->mdss = &dpu_mdss->base;
> -
> return ret;
>
> irq_error:
> --
> 2.20.1
>
--
Sean Paul, Software Engineer, Google / Chromium OS
Powered by blists - more mailing lists