[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190618212457.9764-1-tim.c.chen@linux.intel.com>
Date: Tue, 18 Jun 2019 14:24:57 -0700
From: Tim Chen <tim.c.chen@...ux.intel.com>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: Tim Chen <tim.c.chen@...ux.intel.com>,
Alexei Starovoitov <alexei.starovoitov@...il.com>,
Jonathan Corbet <corbet@....net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ben Greear <greearb@...delatech.com>, stable@...r.kernel.org,
Andi Kleen <ak@...ux.intel.com>,
Dave Hansen <dave.hansen@...el.com>,
Jun Nakajima <jun.nakajima@...el.com>,
Jiri Kosina <jikos@...nel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Tom Lendacky <thomas.lendacky@....com>,
Ingo Molnar <mingo@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
Josh Poimboeuf <jpoimboe@...hat.com>,
Andrea Arcangeli <aarcange@...hat.com>,
David Woodhouse <dwmw@...zon.co.uk>,
Asit Mallick <asit.k.mallick@...el.com>,
Arjan van de Ven <arjan@...ux.intel.com>,
Jon Masters <jcm@...hat.com>,
Waiman Long <longman9394@...il.com>,
Borislav Petkov <bp@...en8.de>,
Mark Gross <mgross@...ux.intel.com>,
LKML <linux-kernel@...r.kernel.org>, x86@...nel.org
Subject: [PATCH v4] Documentation: Add section about CPU vulnerabilities for Spectre
Add documentation for Spectre vulnerability and the mitigation mechanisms:
- Explain the problem and risks
- Document the mitigation mechanisms
- Document the command line controls
- Document the sysfs files
Co-developed-by: Andi Kleen <ak@...ux.intel.com>
Signed-off-by: Andi Kleen <ak@...ux.intel.com>
Co-developed-by: Tim Chen <tim.c.chen@...ux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@...ux.intel.com>
Cc: stable@...r.kernel.org
---
Documentation/admin-guide/hw-vuln/index.rst | 1 +
Documentation/admin-guide/hw-vuln/spectre.rst | 699 ++++++++++++++++++
Documentation/userspace-api/spec_ctrl.rst | 2 +
3 files changed, 702 insertions(+)
create mode 100644 Documentation/admin-guide/hw-vuln/spectre.rst
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index ffc064c1ec68..49311f3da6f2 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -9,5 +9,6 @@ are configurable at compile, boot or run time.
.. toctree::
:maxdepth: 1
+ spectre
l1tf
mds
diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst
new file mode 100644
index 000000000000..4db0ec8b7682
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -0,0 +1,699 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Spectre Side Channels
+=====================
+
+Spectre is a class of side channel attacks that exploit branch prediction
+and speculative execution on modern CPUs to read memory, possibly
+bypassing access controls. Speculative execution side channel exploits
+do not modify memory but attempt to infer privileged data in the memory.
+
+This document covers Spectre variant 1 and Spectre variant 2.
+
+Affected processors
+-------------------
+
+Speculative execution side channel methods affect a wide range of modern
+high performance processors, since most modern high speed processors
+use branch prediction and speculative execution.
+
+The following CPUs are vulnerable:
+
+ - Intel Core, Atom, Pentium, and Xeon processors
+
+ - AMD Phenom, EPYC, and Zen processors
+
+ - IBM POWER and zSeries processors
+
+ - Higher end ARM processors
+
+ - Apple CPUs
+
+ - Higher end MIPS CPUs
+
+ - Likely most other high performance CPUs. Contact your CPU vendor for details.
+
+Whether a processor is affected or not can be read out from the Spectre
+vulnerability files in sysfs. See :ref:`spectre_sys_info`.
+
+Related CVEs
+------------
+
+The following CVE entries describe Spectre variants:
+
+ ============= ======================= =================
+ CVE-2017-5753 Bounds check bypass Spectre variant 1
+ CVE-2017-5715 Branch target injection Spectre variant 2
+ ============= ======================= =================
+
+Problem
+-------
+
+CPUs use speculative operations to improve performance. That may leave
+traces of memory accesses or computations in the processor's caches,
+buffers, and branch predictors. Malicious software may be able to
+influence the speculative execution paths, and then use the side effects
+of the speculative execution in the CPUs' caches and buffers to infer
+privileged data touched during the speculative execution.
+
+Spectre variant 1 attacks take advantage of speculative execution of
+conditional branches, while Spectre variant 2 attacks use speculative
+execution of indirect branches to leak privileged memory.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
+:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+
+Spectre variant 1 (Bounds Check Bypass)
+---------------------------------------
+
+The bounds check bypass attack :ref:`[2] <spec_ref2>` takes advantage
+of speculative execution that bypass conditional branch instructions
+used for memory access bounds check (e.g. checking if the index of an
+array results in memory access within a valid range). This results in
+memory accesses to invalid memory (with out-of-bound index) that are
+done speculatively before validation checks resolve. Such speculative
+memory accesses can leave side effects, creating side channels which
+leak information to the attacker.
+
+There are some extensions of Spectre variant 1 attacks for reading data
+over the network, see :ref:`[12] <spec_ref12>`. However such attacks
+are difficult, low bandwidth, fragile, and are considered low risk.
+
+Spectre variant 2 (Branch Target Injection)
+-------------------------------------------
+
+The branch target injection attack takes advantage of speculative
+execution of indirect branches :ref:`[3] <spec_ref3>`. The indirect
+branch predictors inside the processor used to guess the target of
+indirect branches can be influenced by an attacker, causing gadget code
+to be speculatively executed, thus exposing sensitive data touched by
+the victim. The side effects left in the CPU's caches during speculative
+execution can be measured to infer data values.
+
+.. _poison_btb:
+
+In Spectre variant 2 attacks, the attacker can steer speculative indirect
+branches in the victim to gadget code by poisoning the branch target
+buffer of a CPU used for predicting indirect branch addresses. Such
+poisoning could be done by indirect branching into existing code,
+with the address offset of the indirect branch under the attacker's
+control. Since the branch prediction on impacted hardware does not
+fully disambiguate branch address and uses the offset for prediction,
+this could cause privileged code's indirect branch to jump to a gadget
+code with the same offset.
+
+The most useful gadgets take an attacker-controlled input parameter (such
+as a register value) so that the memory read can be controlled. Gadgets
+without input parameters might be possible, but the attacker would have
+very little control over what memory can be read, reducing the risk of
+the attack revealing useful data.
+
+One other variant 2 attack vector is for the attacker to poison the
+return stack buffer (RSB) :ref:`[13] <spec_ref13>` to cause speculative
+subroutine return instruction execution to go to an gadget. An attacker's
+imbalanced subroutine call instructions might "poison" entries in the
+return stack buffer which are later consumed by a victim's subroutine
+return instructions. This attack can be mitigated by flushing the return
+stack buffer on context switch, or virtual machine (VM) exit.
+
+On systems with simultaneous multi-threading (SMT), attacks are possible
+from from the sibling thread, as level 1 cache and branch target buffer
+(BTB) may be shared between hardware threads in a CPU core. A malicious
+program running on the sibling thread may influence its peer's BTB to
+steer its indirect branch speculations to gadget code, and measure the
+speculative execution's side effects left in level 1 cache to infer the
+victim's data.
+
+Attack scenarios
+----------------
+
+The following list of attack scenarios have been anticipated, but may
+not cover all possible attack vectors.
+
+1. A user process attacking the kernel
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ The attacker passes a parameter to the kernel via a register or
+ via a known address in memory during a syscall. Such parameter may
+ be used later by the kernel as an index to an array or to derive
+ a pointer for a Spectre variant 1 attack. The index or pointer
+ is invalid, but bound checks are bypassed in the code branch taken
+ for speculative execution. This could cause privileged memory to be
+ accessed and leaked.
+
+ For kernel code that has been identified where data pointers could
+ potentially be influenced for Spectre attacks, new "nospec" accessor
+ macros are used to prevent speculative loading of data.
+
+ Spectre variant 2 attacker can :ref:`poison <poison_btb>` the branch
+ target buffer (BTB) before issuing syscall to launch an attack.
+ After entering the kernel, the kernel could use the poisoned branch
+ target buffer on indirect jump and jump to gadget code in speculative
+ execution.
+
+ If an attacker tries to control the memory addresses leaked during
+ speculative execution, he would also need to pass a parameter to the
+ gadget, either through a register or a known address in memory. After
+ the gadget has executed, he can measure the side effect.
+
+ The kernel can protect itself against consuming poisoned branch
+ target buffer entries by using return trampolines (also known as
+ "retpoline") :ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` for all
+ indirect branches. Return trampolines trap speculative execution paths
+ to prevent jumping to gadget code during speculative execution.
+ x86 CPUs with Enhanced Indirect Branch Restricted Speculation
+ (Enhanced IBRS) available in hardware should use the feature to
+ mitigate Spectre variant 2 instead of retpoline. Enhanced IBRS is
+ more efficient than retpoline.
+
+ There may be gadget code in firmware which could be exploited with
+ Spectre variant 2 attack by a rogue user process. To mitigate such
+ attacks on x86, Indirect Branch Restricted Speculation (IBRS) feature
+ is turned on before the kernel invokes any firmware code.
+
+2. A user process attacking another user process
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ A malicious user process can try to attack another user process,
+ either via a context switch on the same hardware thread, or from the
+ sibling hyperthread sharing a physical processor core on simultaneous
+ multi-threading (SMT) system.
+
+ Spectre variant 1 attacks generally require passing parameters
+ between the processes, which needs a data passing relationship, such
+ as remote procedure calls (RPC). Those parameters are used in gadget
+ code to derive invalid data pointers accessing privileged memory in
+ the attacked process.
+
+ Spectre variant 2 attacks can be launched from a rogue process by
+ :ref:`poisoning <poison_btb>` the branch target buffer. This can
+ influence the indirect branch targets for a victim process that either
+ runs later on the same hardware thread, or running concurrently on
+ a sibling hardware thread sharing the same physical core.
+
+ A user process can protect itself against Spectre variant 2 attacks
+ by using the prctl() syscall to disable indirect branch speculation
+ for itself. An administrator can also cordon off an unsafe process
+ from polluting the branch target buffer by disabling the process's
+ indirect branch speculation. This comes with a performance cost
+ from not using indirect branch speculation and clearing the branch
+ target buffer. When SMT is enabled on x86, for a process that has
+ indirect branch speculation disabled, Single Threaded Indirect Branch
+ Predictors (STIBP) :ref:`[4] <spec_ref4>` are turned on to prevent the
+ sibling thread from controlling branch target buffer. In addition,
+ the Indirect Branch Prediction Barrier (IBPB) is issued to clear the
+ branch target buffer when context switching to and from such process.
+
+ On x86, the return stack buffer is stuffed on context switch.
+ This prevents the branch target buffer from being used for branch
+ prediction when the return stack buffer underflows while switching to
+ a deeper call stack. Any poisoned entries in the return stack buffer
+ left by the previous process will also be cleared.
+
+ User programs should use address space randomization to make attacks
+ more difficult (Set /proc/sys/kernel/randomize_va_space = 1 or 2).
+
+3. A virtualized guest attacking the host
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ The attack mechanism is similar to how user processes attack the
+ kernel. The kernel is entered via hyper-calls or other virtualization
+ exit paths.
+
+ For Spectre variant 1 attacks, rogue guests can pass parameters
+ (e.g. in registers) via hyper-calls to derive invalid pointers to
+ speculate into privileged memory after entering the kernel. For places
+ where such kernel code has been identified, nospec accessor macros
+ are used to stop speculative memory access.
+
+ For Spectre variant 2 attacks, rogue guests can :ref:`poison
+ <poison_btb>` the branch target buffer or return stack buffer, causing
+ the kernel to jump to gadget code in the speculative execution paths.
+
+ To mitigate variant 2, the host kernel can use return trampolines
+ for indirect branches to bypass the poisoned branch target buffer,
+ and flushing the return stack buffer on VM exit. This prevents rogue
+ guests from affecting indirect branching in the host kernel.
+
+ To protect host processes from rogue guests, host processes can have
+ indirect branch speculation disabled via prctl(). The branch target
+ buffer is cleared before context switching to such processes.
+
+4. A virtualized guest attacking other guest
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ A rogue guest may attack another guest to get data accessible by the
+ other guest.
+
+ Spectre variant 1 attacks are possible if parameters can be passed
+ between guests. This may be done via mechanisms such as shared memory
+ or message passing. Such parameters could be used to derive data
+ pointers to privileged data in guest. The privileged data could be
+ accessed by gadget code in the victim's speculation paths.
+
+ Spectre variant 2 attacks can be launched from a rogue guest by
+ :ref:`poisoning <poison_btb>` the branch target buffer or the return
+ stack buffer. Such poisoned entries could be used to influence
+ speculation execution paths in the victim guest.
+
+ Linux kernel mitigates attacks to other guests running in the same
+ CPU hardware thread by flushing the return stack buffer on VM exit,
+ and clearing the branch target buffer before switching to a new guest.
+
+ If SMT is used, Spectre variant 2 attacks from an untrusted guest
+ in the sibling hyperthread can be mitigated by the administrator,
+ by turning off the unsafe guest's indirect branch speculation via
+ prctl(). A guest can also protect itself by turning on microcode
+ based mitigations (such as IBPB or STIBP on x86) within the guest.
+
+.. _spectre_sys_info:
+
+Spectre system information
+--------------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current
+mitigation status of the system for Spectre: whether the system is
+vulnerable, and which mitigations are active.
+
+The sysfs file showing Spectre variant 1 mitigation status is:
+
+ /sys/devices/system/cpu/vulnerabilities/spectre_v1
+
+The possible values in this file are:
+
+ ======================================= =================================
+ 'Mitigation: __user pointer sanitation' Protection in kernel on a case by
+ case base with explicit pointer
+ sanitation.
+ ======================================= =================================
+
+However, the protections are put in place on a case by case basis,
+and there is no guarantee that all possible attack vectors for Spectre
+variant 1 are covered.
+
+The spectre_v2 kernel file reports if the kernel has been compiled with
+retpoline mitigation or if the CPU has hardware mitigation, and if the
+CPU has support for additional process-specific mitigation.
+
+This file also reports CPU features enabled by microcode to mitigate
+attack between user processes:
+
+1. Indirect Branch Prediction Barrier (IBPB) to add additional
+ isolation between processes of different users.
+2. Single Thread Indirect Branch Predictors (STIBP) to add additional
+ isolation between CPU threads running on the same core.
+
+These CPU features may impact performance when used and can be enabled
+per process on a case-by-case base.
+
+The sysfs file showing Spectre variant 2 mitigation status is:
+
+ /sys/devices/system/cpu/vulnerabilities/spectre_v2
+
+The possible values in this file are:
+
+ - Kernel status:
+
+ ==================================== =================================
+ 'Not affected' The processor is not vulnerable
+ 'Vulnerable' Vulnerable, no mitigation
+ 'Mitigation: Full generic retpoline' Software-focused mitigation
+ 'Mitigation: Full AMD retpoline' AMD-specific software mitigation
+ 'Mitigation: Enhanced IBRS' Hardware-focused mitigation
+ ==================================== =================================
+
+ - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
+ used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
+
+ ========== =============================================================
+ 'IBRS_FW' Protection against user program attacks when calling firmware
+ ========== =============================================================
+
+ - Indirect branch prediction barrier (IBPB) status for protection between
+ processes of different users. This feature can be controlled through
+ prctl() per process, or through kernel command line options. This is
+ an x86 only feature. For more details see below.
+
+ =================== ========================================================
+ 'IBPB: disabled' IBPB unused
+ 'IBPB: always-on' Use IBPB on all tasks
+ 'IBPB: conditional' Use IBPB on SECCOMP or indirect branch restricted tasks
+ =================== ========================================================
+
+ - Single threaded indirect branch prediction (STIBP) status for protection
+ between different hyper threads. This feature can be controlled through
+ prctl per process, or through kernel command line options. This is x86
+ only feature. For more details see below.
+
+ ==================== ========================================================
+ 'STIBP: disabled' STIBP unused
+ 'STIBP: forced' Use STIBP on all tasks
+ 'STIBP: conditional' Use STIBP on SECCOMP or indirect branch restricted tasks
+ ==================== ========================================================
+
+ - Return stack buffer (RSB) protection status:
+
+ ============= ===========================================
+ 'RSB filling' Protection of RSB on context switch enabled
+ ============= ===========================================
+
+Full mitigation might require an microcode update from the CPU
+vendor. When the necessary microcode is not available, the kernel will
+report vulnerability.
+
+Turning on mitigation for Spectre variant 1 and Spectre variant 2
+-----------------------------------------------------------------
+
+1. Kernel mitigation
+^^^^^^^^^^^^^^^^^^^^
+
+ For the Spectre variant 1, vulnerable kernel code (as determined
+ by code audit or scanning tools) are annotated on a case by case
+ basis to use nospec accessor macros for bounds clipping :ref:`[2]
+ <spec_ref2>` to avoid any usable disclosure gadgets. However, it may
+ not cover all attack vectors for Spectre variant 1.
+
+ For Spectre variant 2 mitigation, the compiler turns indirect calls or
+ jumps in the kernel into equivalent return trampolines (retpolines)
+ :ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` to go to the target
+ addresses. Speculative execution paths under retpolines are trapped
+ in an infinite loop to prevent any speculative execution jumping to
+ a gadget.
+
+ To turn on retpoline mitigation on a vulnerable CPU, the kernel
+ needs to be compiled with a gcc compiler that supports the
+ -mindirect-branch=thunk-extern -mindirect-branch-register options.
+ If the kernel is compiled with a Clang compiler, the compiler needs
+ to support -mretpoline-external-thunk option. The kernel config
+ CONFIG_RETPOLINE needs to be turned on, and the CPU needs to run with
+ the latest updated microcode.
+
+ On Intel Skylake-era systems the mitigation covers most, but not all,
+ cases. See :ref:`[3] <spec_ref3>` for more details.
+
+ On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
+ IBRS on x86), retpoline is automatically disabled at run time.
+
+ The retpoline mitigation is turned on by default on vulnerable
+ CPUs. It can be forced on or off by the administrator
+ via the kernel command line and sysfs control files. See
+ :ref:`spectre_mitigation_control_command_line`.
+
+ On x86, indirect branch restricted speculation is turned on by default
+ before invoking any firmware code to prevent Spectre variant 2 exploits
+ using the firmware.
+
+ Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+ and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
+ attacks on the kernel generally more difficult.
+
+2. User program mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ User programs can mitigate Spectre variant 1 using LFENCE or "bounds
+ clipping". For more details see :ref:`[2] <spec_ref2>`.
+
+ For Spectre variant 2 mitigation, individual user programs
+ can be compiled with return trampolines for indirect branches.
+ This protects them from consuming poisoned entries in the branch
+ target buffer left by malicious software. Alternatively, the
+ programs can disable their indirect branch speculation via prctl()
+ (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`)
+ On x86, this will turn on STIBP to guard against attacks from the
+ sibling thread when the user program is running, and use IBPB to
+ flush the branch target buffer when switching to/from the program.
+
+ Restricting indirect branch speculation on a user program will
+ also prevent the program from launching a variant 2 attack
+ on x86. All sand-boxed SECCOMP programs have indirect branch
+ speculation restricted by default. Administrators can change
+ that behavior via the kernel command line and sysfs control files.
+ See :ref:`spectre_mitigation_control_command_line`.
+
+ Programs that disable their indirect branch speculation will have
+ more overheads and run slower.
+
+ User programs should use address space randomization
+ (/proc/sys/kernel/randomize_va_space = 1 or 2) to make attacks more
+ difficult.
+
+3. VM mitigation
+^^^^^^^^^^^^^^^^
+
+ Within the kernel, Spectre variant 1 attacks from rogue guests are
+ mitigated on a case by case basis in VM exit paths. Vulnerable code
+ uses nospec accessor macros for "bounds clipping", to avoid any
+ usable disclosure gadgets. However, this may not cover all variant
+ 1 attack vectors.
+
+ For Spectre variant 2 attacks from rogue guests to the kernel, the
+ Linux kernel uses retpoline or Enhanced IBRS to prevent consumption of
+ poisoned entries in branch target buffer left by rogue guests. It also
+ flushes the return stack buffer on every VM exit to prevent a return
+ stack buffer underflow so poisoned branch target buffer could be used,
+ or attacker guests leaving poisoned entries in the return stack buffer.
+
+ To mitigate guest-to-guest attacks in the same CPU hardware thread,
+ the branch target buffer is sanitized by flushing before switching
+ to a new guest on a CPU.
+
+ The above mitigations are turned on by default on vulnerable CPUs.
+
+ To mitigate guest-to-guest attacks from sibling thread when SMT is
+ in use, an untrusted guest running in the sibling thread can have
+ its indirect branch speculation disabled by administrator via prctl().
+
+ The kernel also allows guests to use any microcode based mitigation
+ they chose to use (such as IBPB or STIBP on x86) to protect themselves.
+
+.. _spectre_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Spectre variant 2 mitigation can be disabled or force enabled at the
+kernel command line.
+
+ nospectre_v2
+
+ [X86] Disable all mitigations for the Spectre variant 2
+ (indirect branch prediction) vulnerability. System may
+ allow data leaks with this option, which is equivalent
+ to spectre_v2=off.
+
+
+ spectre_v2=
+
+ [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability.
+ The default operation protects the kernel from
+ user space attacks.
+
+ on
+ unconditionally enable, implies
+ spectre_v2_user=on
+ off
+ unconditionally disable, implies
+ spectre_v2_user=off
+ auto
+ kernel detects whether your CPU model is
+ vulnerable
+
+ Selecting 'on' will, and 'auto' may, choose a
+ mitigation method at run time according to the
+ CPU, the available microcode, the setting of the
+ CONFIG_RETPOLINE configuration option, and the
+ compiler with which the kernel was built.
+
+ Selecting 'on' will also enable the mitigation
+ against user space to user space task attacks.
+
+ Selecting 'off' will disable both the kernel and
+ the user space protections.
+
+ Specific mitigations can also be selected manually:
+
+ retpoline
+ replace indirect branches
+ retpoline,generic
+ google's original retpoline
+ retpoline,amd
+ AMD-specific minimal thunk
+
+ Not specifying this option is equivalent to
+ spectre_v2=auto.
+
+For user space mitigation:
+
+ spectre_v2_user=
+
+ [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability between
+ user space tasks
+
+ on
+ Unconditionally enable mitigations. Is
+ enforced by spectre_v2=on
+
+ off
+ Unconditionally disable mitigations. Is
+ enforced by spectre_v2=off
+
+ prctl
+ Indirect branch speculation is enabled,
+ but mitigation can be enabled via prctl
+ per thread. The mitigation control state
+ is inherited on fork.
+
+ prctl,ibpb
+ Like "prctl" above, but only STIBP is
+ controlled per thread. IBPB is issued
+ always when switching between different user
+ space processes.
+
+ seccomp
+ Same as "prctl" above, but all seccomp
+ threads will enable the mitigation unless
+ they explicitly opt out.
+
+ seccomp,ibpb
+ Like "seccomp" above, but only STIBP is
+ controlled per thread. IBPB is issued
+ always when switching between different
+ user space processes.
+
+ auto
+ Kernel selects the mitigation depending on
+ the available CPU features and vulnerability.
+
+ Default mitigation:
+ If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+ Not specifying this option is equivalent to
+ spectre_v2_user=auto.
+
+ In general the kernel by default selects
+ reasonable mitigations for the current CPU. To
+ disable Spectre variant 2 mitigations boot with
+ spectre_v2=off. Spectre variant 1 mitigations
+ cannot be disabled.
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+ If all userspace applications are from trusted sources and do not
+ execute externally supplied untrusted code, then the mitigations can
+ be disabled.
+
+2. Protect sensitive programs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ For security-sensitive programs that have secrets (e.g. crypto
+ keys), protection against Spectre variant 2 can be put in place by
+ disabling indirect branch speculation when the program is running
+ (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+
+3. Sandbox untrusted programs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ Untrusted programs that could be a source of attacks can be cordoned
+ off by disabling their indirect branch speculation when they are run
+ (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+ This prevents untrusted programs from polluting the branch target
+ buffer. All programs running in SECCOMP sandboxes have indirect
+ branch speculation restricted by default. This behavior can be
+ changed via the kernel command line and sysfs control files. See
+ :ref:`spectre_mitigation_control_command_line`.
+
+3. High security mode
+^^^^^^^^^^^^^^^^^^^^^
+
+ All Spectre variant 2 mitigations can be forced on
+ at boot time for all programs (See the "on" option in
+ :ref:`spectre_mitigation_control_command_line`). This will add
+ overhead as indirect branch speculations for all programs will be
+ restricted.
+
+ On x86, branch target buffer will be flushed with IBPB when switching
+ to a new program. STIBP is left on all the time to protect programs
+ against variant 2 attacks originating from programs running on
+ sibling threads.
+
+ Alternatively, STIBP can be used only when running programs
+ whose indirect branch speculation is explicitly disabled,
+ while IBPB is still used all the time when switching to a new
+ program to clear the branch target buffer (See "ibpb" option in
+ :ref:`spectre_mitigation_control_command_line`). This "ibpb" option
+ has less performance cost than the "on" option, which leaves STIBP
+ on all the time.
+
+_lab1:
+
+References on Spectre
+---------------------
+
+Intel white papers:
+
+.. _spec_ref1:
+
+[1] `Intel analysis of speculative execution side channels <https://newsroom.intel.com/wp-content/uploads/sites/11/2018/01/Intel-Analysis-of-Speculative-Execution-Side-Channels.pdf>`_.
+
+.. _spec_ref2:
+
+[2] `Bounds check bypass <https://software.intel.com/security-software-guidance/software-guidance/bounds-check-bypass>`_.
+
+.. _spec_ref3:
+
+[3] `Deep dive: Retpoline: A branch target injection mitigation <https://software.intel.com/security-software-guidance/insights/deep-dive-retpoline-branch-target-injection-mitigation>`_.
+
+.. _spec_ref4:
+
+[4] `Deep Dive: Single Thread Indirect Branch Predictors <https://software.intel.com/security-software-guidance/insights/deep-dive-single-thread-indirect-branch-predictors>`_.
+
+AMD white papers:
+
+.. _spec_ref5:
+
+[5] `AMD64 technology indirect branch control extension <https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf>`_.
+
+.. _spec_ref6:
+
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+
+ARM white papers:
+
+.. _spec_ref7:
+
+[7] `Cache speculation side-channels <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper>`_.
+
+.. _spec_ref8:
+
+[8] `Cache speculation issues update <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/latest-updates/cache-speculation-issues-update>`_.
+
+Google white paper:
+
+.. _spec_ref9:
+
+[9] `Retpoline: a software construct for preventing branch-target-injection <https://support.google.com/faqs/answer/7625886>`_.
+
+MIPS white paper:
+
+.. _spec_ref10:
+
+[10] `MIPS: response on speculative execution and side channel vulnerabilities <https://www.mips.com/blog/mips-response-on-speculative-execution-and-side-channel-vulnerabilities/>`_.
+
+Academic papers:
+
+.. _spec_ref11:
+
+[11] `Spectre Attacks: Exploiting Speculative Execution <https://spectreattack.com/spectre.pdf>`_.
+
+.. _spec_ref12:
+
+[12] `NetSpectre: Read Arbitrary Memory over Network <https://arxiv.org/abs/1807.10535>`_.
+
+.. _spec_ref13:
+
+[13] `Spectre Returns! Speculation Attacks using the Return Stack Buffer <https://www.usenix.org/system/files/conference/woot18/woot18-paper-koruyeh.pdf>`_.
diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst
index 1129c7550a48..7ddd8f667459 100644
--- a/Documentation/userspace-api/spec_ctrl.rst
+++ b/Documentation/userspace-api/spec_ctrl.rst
@@ -49,6 +49,8 @@ If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.
+.. _set_spec_ctrl:
+
PR_SET_SPECULATION_CTRL
-----------------------
--
2.20.1
Powered by blists - more mailing lists