[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1560847368-16069-1-git-send-email-bbiswas@nvidia.com>
Date: Tue, 18 Jun 2019 01:42:48 -0700
From: Bitan Biswas <bbiswas@...dia.com>
To: Laxman Dewangan <ldewangan@...dia.com>,
Thierry Reding <treding@...dia.com>,
Jonathan Hunter <jonathanh@...dia.com>,
<linux-i2c@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Peter Rosin <peda@...ntia.se>,
Wolfram Sang <wsa@...-dreams.de>,
Dmitry Osipenko <digetx@...il.com>
CC: Shardar Mohammed <smohammed@...dia.com>,
Sowjanya Komatineni <skomatineni@...dia.com>,
Mantravadi Karthik <mkarthik@...dia.com>,
Bitan Biswas <bbiswas@...dia.com>
Subject: [PATCH V2] i2c: tegra: disable irq in tegra_i2c_xfer_msg
tegra_i2c_xfer_msg initiates the I2C transfer in DMA
or PIO mode. It involves steps that need FIFO register
access, DMA API calls like dma_sync_single_for_device, etc.
Tegra I2C ISR has calls to tegra_i2c_empty_rx_fifo in PIO mode
and in DMA/PIO mode writes different I2C registers including
I2C interrupt status. ISR cannot start processing
before the preparation step at tegra_i2c_xfer_msg is complete.
Hence, a synchronization between ISR and tegra_i2c_xfer_msg
is in place today using spinlock.
Spinlock busy waits and can add avoidable delays.
In this patch needed synchronization is achieved by disabling
I2C interrupt during preparation step and enabling interrupt
once preparation is over and spinlock is no longer needed.
Signed-off-by: Bitan Biswas <bbiswas@...dia.com>
---
drivers/i2c/busses/i2c-tegra.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6fb545e..ccc7fae 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -240,7 +240,6 @@ struct tegra_i2c_hw_feature {
* @bus_clk_rate: current I2C bus clock rate
* @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
* @is_multimaster_mode: track if I2C controller is in multi-master mode
- * @xfer_lock: lock to serialize transfer submission and processing
* @tx_dma_chan: DMA transmit channel
* @rx_dma_chan: DMA receive channel
* @dma_phys: handle to DMA resources
@@ -270,8 +269,6 @@ struct tegra_i2c_dev {
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
bool is_multimaster_mode;
- /* xfer_lock: lock to serialize transfer submission and processing */
- spinlock_t xfer_lock;
struct dma_chan *tx_dma_chan;
struct dma_chan *rx_dma_chan;
dma_addr_t dma_phys;
@@ -835,7 +832,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
status = i2c_readl(i2c_dev, I2C_INT_STATUS);
- spin_lock(&i2c_dev->xfer_lock);
if (status == 0) {
dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
@@ -935,7 +931,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
complete(&i2c_dev->msg_complete);
done:
- spin_unlock(&i2c_dev->xfer_lock);
return IRQ_HANDLED;
}
@@ -1054,7 +1049,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
u32 packet_header;
u32 int_mask;
unsigned long time_left;
- unsigned long flags;
size_t xfer_size;
u32 *buffer = NULL;
int err = 0;
@@ -1085,7 +1079,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
*/
xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
i2c_dev->bus_clk_rate);
- spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
+ if (!i2c_dev->irq_disabled) {
+ disable_irq_nosync(i2c_dev->irq);
+ i2c_dev->irq_disabled = true;
+ }
int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
tegra_i2c_unmask_irq(i2c_dev, int_mask);
@@ -1180,7 +1177,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_readl(i2c_dev, I2C_INT_MASK));
unlock:
- spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
+ if (i2c_dev->irq_disabled) {
+ i2c_dev->irq_disabled = false;
+ enable_irq(i2c_dev->irq);
+ }
if (dma) {
if (err)
@@ -1576,7 +1576,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
I2C_PACKET_HEADER_SIZE;
init_completion(&i2c_dev->msg_complete);
init_completion(&i2c_dev->dma_complete);
- spin_lock_init(&i2c_dev->xfer_lock);
if (!i2c_dev->hw->has_single_clk_source) {
fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
--
2.7.4
Powered by blists - more mailing lists