[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8181b95c-2ddb-0c54-4f2a-8938260fcc5b@arm.com>
Date: Tue, 18 Jun 2019 11:46:29 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Talel Shenhar <talel@...zon.com>, nicolas.ferre@...rochip.com,
jason@...edaemon.net, mark.rutland@....com,
mchehab+samsung@...nel.org, robh+dt@...nel.org,
davem@...emloft.net, shawn.lin@...k-chips.com, tglx@...utronix.de,
devicetree@...r.kernel.org, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org
Cc: dwmw@...zon.co.uk, benh@...nel.crashing.org, jonnyc@...zon.com,
hhhawa@...zon.com, ronenk@...zon.com, hanochu@...zon.com,
barakw@...zon.com
Subject: Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's
Annapurna Labs FIC
On 10/06/2019 09:34, Talel Shenhar wrote:
> Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.
>
> Signed-off-by: Talel Shenhar <talel@...zon.com>
> ---
> .../interrupt-controller/amazon,al-fic.txt | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> new file mode 100644
> index 0000000..4e82fd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> @@ -0,0 +1,29 @@
> +Amazon's Annapurna Labs Fabric Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> + First cell defines the index of the interrupt within the controller.
> + Second cell is used to specify the trigger type and must be one of the
> + following:
> + - bits[3:0] trigger type and level flags
> + 1 = low-to-high edge triggered
> + 4 = active high level-sensitive
> +- interrupt-parent: specifies the parent interrupt controller.
> +- interrupts: describes which input line in the interrupt parent, this
> + fic's output is connected to. This field property depends on the parent's
> + binding
> +
> +Example:
> +
> +amazon_fic: interrupt-controller@...d8a8500 {
> + compatible = "amazon,al-fic";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x0 0xfd8a8500 0x0 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +};
>
Rob, are you OK with this DT binding?
Thanks,
M.
--
Jazz is not dead. It just smells funny...
Powered by blists - more mailing lists