linux-kernel - Re: [PATCH 2/4] arm64: dts: fsl: ls1028a: Add eDMA node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190618131319.GC1959@dragon>
Date:   Tue, 18 Jun 2019 21:13:20 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Peng Ma <peng.ma@....com>
Cc:     vkoul@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        leoyang.li@....com, dan.j.williams@...el.com,
        dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/4] arm64: dts: fsl: ls1028a: Add eDMA node

On Mon, May 06, 2019 at 09:03:42AM +0000, Peng Ma wrote:
> Add the eDMA device tree nodes for LS1028A devices
> 
> Signed-off-by: Peng Ma <peng.ma@....com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   15 +++++++++++++++
>  1 files changed, 15 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8116fb3..71b87cb 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -235,6 +235,21 @@
>  			status = "disabled";
>  		};
>  
> +		edma0: edma@...0000 {
> +			#dma-cells = <2>;
> +			compatible = "fsl,vf610-edma";
> +			reg = <0x0 0x22c0000 0x0 0x10000>,
> +			      <0x0 0x22d0000 0x0 0x10000>,
> +			      <0x0 0x22e0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "edma-tx", "edma-err";
> +			dma-channels = <32>;
> +			clock-names = "dmamux0", "dmamux1";
> +			clocks = <&clockgen 4 1>,
> +				 <&clockgen 4 1>;
> +		};
> +

The edma@...0000 node had already been added by commit below:

  f54f7be5c5ac ("arm64: dts: ls1028a: Add Audio DT nodes")

Shawn

>  		gpio1: gpio@...0000 {
>  			compatible = "fsl,qoriq-gpio";
>  			reg = <0x0 0x2300000 0x0 0x10000>;
> -- 
> 1.7.1
>