| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAOMZO5B3BRbpAHCAHFvFXDZjPcF+sc=PMwwkntzcBWtRQR+2gQ@mail.gmail.com>
Date: Wed, 19 Jun 2019 11:06:03 -0300
From: Fabio Estevam <festevam@...il.com>
To: Robert Chiras <robert.chiras@....com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
DRI mailing list <dri-devel@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH v2 2/2] drm/panel: Add support for Raydium RM67191 panel driver
On Tue, Jun 18, 2019 at 10:31 AM Robert Chiras <robert.chiras@....com> wrote:
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
> @@ -0,0 +1,709 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * i.MX drm driver - Raydium MIPI-DSI panel driver
Please remove the "i.MX drm driver" as there is nothing i.MX specific
in this driver.
> + *
> + * Copyright 2019 NXP
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +/* Write Manufacture Command Set Control */
> +#define WRMAUCCTR 0xFE
> +
> +#define COL_FMT_16BPP 0x55
> +#define COL_FMT_18BPP 0x66
> +#define COL_FMT_24BPP 0x77
> +
> +/* Manufacturer Command Set pages (CMD2) */
> +struct cmd_set_entry {
> + u8 cmd;
> + u8 param;
> +};
> +
> +/*
> + * There is no description in the Reference Manual about these commands.
> + * We received them from vendor, so just use them as is.
> + */
> +static const struct cmd_set_entry manufacturer_cmd_set[] = {
> + {0xFE, 0x0B},
> + {0x28, 0x40},
> + {0x29, 0x4F},
> + {0xFE, 0x0E},
> + {0x4B, 0x00},
> + {0x4C, 0x0F},
> + {0x4D, 0x20},
> + {0x4E, 0x40},
> + {0x4F, 0x60},
> + {0x50, 0xA0},
> + {0x51, 0xC0},
> + {0x52, 0xE0},
> + {0x53, 0xFF},
> + {0xFE, 0x0D},
> + {0x18, 0x08},
> + {0x42, 0x00},
> + {0x08, 0x41},
> + {0x46, 0x02},
> + {0x72, 0x09},
> + {0xFE, 0x0A},
> + {0x24, 0x17},
> + {0x04, 0x07},
> + {0x1A, 0x0C},
> + {0x0F, 0x44},
> + {0xFE, 0x04},
> + {0x00, 0x0C},
> + {0x05, 0x08},
> + {0x06, 0x08},
> + {0x08, 0x08},
> + {0x09, 0x08},
> + {0x0A, 0xE6},
> + {0x0B, 0x8C},
> + {0x1A, 0x12},
> + {0x1E, 0xE0},
> + {0x29, 0x93},
> + {0x2A, 0x93},
> + {0x2F, 0x02},
> + {0x31, 0x02},
> + {0x33, 0x05},
> + {0x37, 0x2D},
> + {0x38, 0x2D},
> + {0x3A, 0x1E},
> + {0x3B, 0x1E},
> + {0x3D, 0x27},
> + {0x3F, 0x80},
> + {0x40, 0x40},
> + {0x41, 0xE0},
> + {0x4F, 0x2F},
> + {0x50, 0x1E},
> + {0xFE, 0x06},
> + {0x00, 0xCC},
> + {0x05, 0x05},
> + {0x07, 0xA2},
> + {0x08, 0xCC},
> + {0x0D, 0x03},
> + {0x0F, 0xA2},
> + {0x32, 0xCC},
> + {0x37, 0x05},
> + {0x39, 0x83},
> + {0x3A, 0xCC},
> + {0x41, 0x04},
> + {0x43, 0x83},
> + {0x44, 0xCC},
> + {0x49, 0x05},
> + {0x4B, 0xA2},
> + {0x4C, 0xCC},
> + {0x51, 0x03},
> + {0x53, 0xA2},
> + {0x75, 0xCC},
> + {0x7A, 0x03},
> + {0x7C, 0x83},
> + {0x7D, 0xCC},
> + {0x82, 0x02},
> + {0x84, 0x83},
> + {0x85, 0xEC},
> + {0x86, 0x0F},
> + {0x87, 0xFF},
> + {0x88, 0x00},
> + {0x8A, 0x02},
> + {0x8C, 0xA2},
> + {0x8D, 0xEA},
> + {0x8E, 0x01},
> + {0x8F, 0xE8},
> + {0xFE, 0x06},
> + {0x90, 0x0A},
> + {0x92, 0x06},
> + {0x93, 0xA0},
> + {0x94, 0xA8},
> + {0x95, 0xEC},
> + {0x96, 0x0F},
> + {0x97, 0xFF},
> + {0x98, 0x00},
> + {0x9A, 0x02},
> + {0x9C, 0xA2},
> + {0xAC, 0x04},
> + {0xFE, 0x06},
> + {0xB1, 0x12},
> + {0xB2, 0x17},
> + {0xB3, 0x17},
> + {0xB4, 0x17},
> + {0xB5, 0x17},
> + {0xB6, 0x11},
> + {0xB7, 0x08},
> + {0xB8, 0x09},
> + {0xB9, 0x06},
> + {0xBA, 0x07},
> + {0xBB, 0x17},
> + {0xBC, 0x17},
> + {0xBD, 0x17},
> + {0xBE, 0x17},
> + {0xBF, 0x17},
> + {0xC0, 0x17},
> + {0xC1, 0x17},
> + {0xC2, 0x17},
> + {0xC3, 0x17},
> + {0xC4, 0x0F},
> + {0xC5, 0x0E},
> + {0xC6, 0x00},
> + {0xC7, 0x01},
> + {0xC8, 0x10},
> + {0xFE, 0x06},
> + {0x95, 0xEC},
> + {0x8D, 0xEE},
> + {0x44, 0xEC},
> + {0x4C, 0xEC},
> + {0x32, 0xEC},
> + {0x3A, 0xEC},
> + {0x7D, 0xEC},
> + {0x75, 0xEC},
> + {0x00, 0xEC},
> + {0x08, 0xEC},
> + {0x85, 0xEC},
> + {0xA6, 0x21},
> + {0xA7, 0x05},
> + {0xA9, 0x06},
> + {0x82, 0x06},
> + {0x41, 0x06},
> + {0x7A, 0x07},
> + {0x37, 0x07},
> + {0x05, 0x06},
> + {0x49, 0x06},
> + {0x0D, 0x04},
> + {0x51, 0x04},
> +};
> +
> +static const u32 rad_bus_formats[] = {
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_RGB666_1X18,
> + MEDIA_BUS_FMT_RGB565_1X16,
> +};
> +
> +struct rad_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> +
> + struct gpio_desc *reset;
> + struct backlight_device *backlight;
> +
> + bool prepared;
> + bool enabled;
> +
> + struct videomode vm;
> + u32 width_mm;
> + u32 height_mm;
> +};
> +
> +static inline struct rad_panel *to_rad_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct rad_panel, panel);
> +}
> +
> +static int rad_panel_push_cmd_list(struct mipi_dsi_device *dsi)
> +{
> + size_t i;
> + size_t count = ARRAY_SIZE(manufacturer_cmd_set);
> + int ret = 0;
> +
> + for (i = 0; i < count; i++) {
> + const struct cmd_set_entry *entry = &manufacturer_cmd_set[i];
> + u8 buffer[2] = { entry->cmd, entry->param };
> +
> + ret = mipi_dsi_generic_write(dsi, &buffer, sizeof(buffer));
> + if (ret < 0)
> + return ret;
> + }
> +
> + return ret;
> +};
> +
> +static int color_format_from_dsi_format(enum mipi_dsi_pixel_format format)
> +{
> + switch (format) {
> + case MIPI_DSI_FMT_RGB565:
> + return COL_FMT_16BPP;
> + case MIPI_DSI_FMT_RGB666:
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + return COL_FMT_18BPP;
> + case MIPI_DSI_FMT_RGB888:
> + return COL_FMT_24BPP;
> + default:
> + return COL_FMT_24BPP; /* for backward compatibility */
> + }
> +};
> +
> +static int rad_panel_prepare(struct drm_panel *panel)
> +{
> + struct rad_panel *rad = to_rad_panel(panel);
> +
> + if (rad->prepared)
> + return 0;
> +
> + if (rad->reset) {
> + gpiod_set_value_cansleep(rad->reset, 1);
> + usleep_range(3000, 5000);
> + gpiod_set_value_cansleep(rad->reset, 0);
> + usleep_range(18000, 20000);
> + }
> +
> + rad->prepared = true;
> +
> + return 0;
> +}
> +
> +static int rad_panel_unprepare(struct drm_panel *panel)
> +{
> + struct rad_panel *rad = to_rad_panel(panel);
> +
> + if (!rad->prepared)
> + return 0;
> +
> + if (rad->reset) {
> + gpiod_set_value_cansleep(rad->reset, 1);
> + usleep_range(15000, 17000);
> + gpiod_set_value_cansleep(rad->reset, 0);
> + }
> +
> + rad->prepared = false;
> +
> + return 0;
> +}
> +
> +static int rad_panel_enable(struct drm_panel *panel)
> +{
> + struct rad_panel *rad = to_rad_panel(panel);
> + struct mipi_dsi_device *dsi = rad->dsi;
> + struct device *dev = &dsi->dev;
> + int color_format = color_format_from_dsi_format(dsi->format);
> + int ret;
> +
> + if (rad->enabled)
> + return 0;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + ret = rad_panel_push_cmd_list(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to send MCS (%d)\n", ret);
> + goto fail;
> + }
> +
> + /* Select User Command Set table (CMD1) */
> + ret = mipi_dsi_generic_write(dsi, (u8[]){ WRMAUCCTR, 0x00 }, 2);
> + if (ret < 0)
> + goto fail;
> +
> + /* Software reset */
> + ret = mipi_dsi_dcs_soft_reset(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to do Software Reset (%d)\n", ret);
> + goto fail;
> + }
> +
> + usleep_range(15000, 17000);
> +
> + /* Set DSI mode */
> + ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set DSI mode (%d)\n", ret);
> + goto fail;
> + }
> + /* Set tear ON */
> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set tear ON (%d)\n", ret);
> + goto fail;
> + }
> + /* Set tear scanline */
> + ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret);
> + goto fail;
> + }
> + /* Set pixel format */
> + ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format);
> + DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n",
> + color_format);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret);
> + goto fail;
> + }
> + /* Exit sleep mode */
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to exit sleep mode (%d)\n", ret);
> + goto fail;
> + }
> +
> + usleep_range(5000, 7000);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set display ON (%d)\n", ret);
> + goto fail;
> + }
> +
> + backlight_enable(rad->backlight);
> +
> + rad->enabled = true;
> +
> + return 0;
> +
> +fail:
> + if (rad->reset)
> + gpiod_set_value_cansleep(rad->reset, 1);
> +
> + return ret;
> +}
> +
> +static int rad_panel_disable(struct drm_panel *panel)
> +{
> + struct rad_panel *rad = to_rad_panel(panel);
> + struct mipi_dsi_device *dsi = rad->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (!rad->enabled)
> + return 0;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + backlight_disable(rad->backlight);
> +
> + usleep_range(10000, 12000);
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to set display OFF (%d)\n", ret);
> + return ret;
> + }
> +
> + usleep_range(5000, 10000);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "Failed to enter sleep mode (%d)\n", ret);
> + return ret;
> + }
> +
> + rad->enabled = false;
> +
> + return 0;
> +}
> +
> +static int rad_panel_get_modes(struct drm_panel *panel)
> +{
> + struct rad_panel *rad = to_rad_panel(panel);
> + struct device *dev = &rad->dsi->dev;
> + struct drm_connector *connector = panel->connector;
> + struct drm_display_mode *mode;
> + u32 *bus_flags = &connector->display_info.bus_flags;
> + int ret;
> +
> + mode = drm_mode_create(connector->dev);
> + if (!mode) {
> + DRM_DEV_ERROR(dev, "Failed to create display mode!\n");
> + return 0;
> + }
> +
> + drm_display_mode_from_videomode(&rad->vm, mode);
> + mode->width_mm = rad->width_mm;
> + mode->height_mm = rad->height_mm;
> + connector->display_info.width_mm = rad->width_mm;
> + connector->display_info.height_mm = rad->height_mm;
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +
> + if (rad->vm.flags & DISPLAY_FLAGS_DE_HIGH)
> + *bus_flags |= DRM_BUS_FLAG_DE_HIGH;
> + if (rad->vm.flags & DISPLAY_FLAGS_DE_LOW)
> + *bus_flags |= DRM_BUS_FLAG_DE_LOW;
> + if (rad->vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> + *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE;
> + if (rad->vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
> + *bus_flags |= DRM_BUS_FLAG_PIXDATA_POSEDGE;
> +
> + ret = drm_display_info_set_bus_formats(&connector->display_info,
> + rad_bus_formats,
> + ARRAY_SIZE(rad_bus_formats));
> + if (ret)
> + return ret;
> +
> + drm_mode_probed_add(panel->connector, mode);
> +
> + return 1;
> +}
> +
> +static int rad_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi);
> + struct device *dev = &dsi->dev;
> + u16 brightness;
> + int ret;
> +
> + if (!rad->prepared)
> + return 0;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "\n");
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + bl->props.brightness = brightness;
> +
> + return brightness & 0xff;
> +}
> +
> +static int rad_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi);
> + struct device *dev = &dsi->dev;
> + int ret = 0;
> +
> + if (!rad->prepared)
> + return 0;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "New brightness: %d\n", bl->props.brightness);
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops rad_bl_ops = {
> + .update_status = rad_bl_update_status,
> + .get_brightness = rad_bl_get_brightness,
> +};
> +
> +static const struct drm_panel_funcs rad_panel_funcs = {
> + .prepare = rad_panel_prepare,
> + .unprepare = rad_panel_unprepare,
> + .enable = rad_panel_enable,
> + .disable = rad_panel_disable,
> + .get_modes = rad_panel_get_modes,
> +};
> +
> +/*
> + * The clock might range from 66MHz (30Hz refresh rate)
> + * to 132MHz (60Hz refresh rate)
> + */
> +static const struct display_timing rad_default_timing = {
> + .pixelclock = { 66000000, 132000000, 132000000 },
> + .hactive = { 1080, 1080, 1080 },
> + .hfront_porch = { 20, 20, 20 },
> + .hsync_len = { 2, 2, 2 },
> + .hback_porch = { 34, 34, 34 },
> + .vactive = { 1920, 1920, 1920 },
> + .vfront_porch = { 10, 10, 10 },
> + .vsync_len = { 2, 2, 2 },
> + .vback_porch = { 4, 4, 4 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW |
> + DISPLAY_FLAGS_VSYNC_LOW |
> + DISPLAY_FLAGS_DE_LOW |
> + DISPLAY_FLAGS_PIXDATA_NEGEDGE,
> +};
> +
> +static int rad_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *timings;
> + struct rad_panel *panel;
> + struct backlight_properties bl_props;
> + int ret;
> + u32 video_mode;
> +
> + panel = devm_kzalloc(&dsi->dev, sizeof(*panel), GFP_KERNEL);
> + if (!panel)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, panel);
> +
> + panel->dsi = dsi;
> +
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + ret = of_property_read_u32(np, "video-mode", &video_mode);
> + if (!ret) {
> + switch (video_mode) {
> + case 0:
> + /* burst mode */
> + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_BURST;
> + break;
> + case 1:
> + /* non-burst mode with sync event */
> + break;
> + case 2:
> + /* non-burst mode with sync pulse */
> + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> + break;
> + default:
> + dev_warn(dev, "invalid video mode %d\n", video_mode);
> + break;
> + }
> + }
> +
> + ret = of_property_read_u32(np, "dsi-lanes", &dsi->lanes);
> + if (ret < 0) {
> + dev_err(dev, "Failed to get dsi-lanes property (%d)\n", ret);
> + return ret;
> + }
> +
> + /*
> + * 'display-timings' is optional, so verify if the node is present
> + * before calling of_get_videomode so we won't get console error
> + * messages
> + */
> + timings = of_get_child_by_name(np, "display-timings");
> + if (timings) {
> + of_node_put(timings);
> + ret = of_get_videomode(np, &panel->vm, 0);
> + } else {
> + videomode_from_timing(&rad_default_timing, &panel->vm);
> + }
> + if (ret < 0)
> + return ret;
> +
> + of_property_read_u32(np, "width-mm", &panel->width_mm);
> + of_property_read_u32(np, "height-mm", &panel->height_mm);
> +
> + panel->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +
> + if (IS_ERR(panel->reset))
> + panel->reset = NULL;
> + else
> + gpiod_set_value_cansleep(panel->reset, 1);
> +
> + memset(&bl_props, 0, sizeof(bl_props));
> + bl_props.type = BACKLIGHT_RAW;
> + bl_props.brightness = 255;
> + bl_props.max_brightness = 255;
> +
> + panel->backlight = devm_backlight_device_register(dev, dev_name(dev),
> + dev, dsi,
> + &rad_bl_ops,
> + &bl_props);
> + if (IS_ERR(panel->backlight)) {
> + ret = PTR_ERR(panel->backlight);
> + dev_err(dev, "Failed to register backlight (%d)\n", ret);
> + return ret;
> + }
> +
> + drm_panel_init(&panel->panel);
> + panel->panel.funcs = &rad_panel_funcs;
> + panel->panel.dev = dev;
> + dev_set_drvdata(dev, panel);
> +
> + ret = drm_panel_add(&panel->panel);
> +
> + if (ret < 0)
> + return ret;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0)
> + drm_panel_remove(&panel->panel);
> +
> + return ret;
> +}
> +
> +static int rad_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi);
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "Failed to detach from host (%d)\n",
> + ret);
> +
> + drm_panel_remove(&rad->panel);
> +
> + return 0;
> +}
> +
> +static void rad_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi);
> +
> + rad_panel_disable(&rad->panel);
> + rad_panel_unprepare(&rad->panel);
> +}
> +
> +#ifdef CONFIG_PM
> +static int rad_panel_suspend(struct device *dev)
> +{
> + struct rad_panel *rad = dev_get_drvdata(dev);
> +
> + if (!rad->reset)
> + return 0;
> +
> + devm_gpiod_put(dev, rad->reset);
> + rad->reset = NULL;
> +
> + return 0;
> +}
> +
> +static int rad_panel_resume(struct device *dev)
> +{
> + struct rad_panel *rad = dev_get_drvdata(dev);
> +
> + if (rad->reset)
> + return 0;
> +
> + rad->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(rad->reset))
> + rad->reset = NULL;
> +
> + return PTR_ERR_OR_ZERO(rad->reset);
> +}
> +
> +#endif
> +
> +static const struct dev_pm_ops rad_pm_ops = {
> + SET_RUNTIME_PM_OPS(rad_panel_suspend, rad_panel_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(rad_panel_suspend, rad_panel_resume)
> +};
> +
> +static const struct of_device_id rad_of_match[] = {
> + { .compatible = "raydium,rm67191", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, rad_of_match);
> +
> +static struct mipi_dsi_driver rad_panel_driver = {
> + .driver = {
> + .name = "panel-raydium-rm67191",
> + .of_match_table = rad_of_match,
> + .pm = &rad_pm_ops,
> + },
> + .probe = rad_panel_probe,
> + .remove = rad_panel_remove,
> + .shutdown = rad_panel_shutdown,
> +};
> +module_mipi_dsi_driver(rad_panel_driver);
> +
> +MODULE_AUTHOR("Robert Chiras <robert.chiras@....com>");
> +MODULE_DESCRIPTION("DRM Driver for Raydium RM67191 MIPI DSI panel");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
Powered by blists - more mailing lists