linux-kernel - Re: [PATCH] regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190619190557.GL4814@minitux>
Date:   Wed, 19 Jun 2019 12:05:57 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Jeffrey Hugo <jeffrey.l.hugo@...il.com>
Cc:     lgirdwood@...il.com, broonie@...nel.org,
        jorge.ramirez-ortiz@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] regulator: qcom_spmi: Fix math of
 spmi_regulator_set_voltage_time_sel

On Wed 19 Jun 11:56 PDT 2019, Jeffrey Hugo wrote:

> spmi_regulator_set_voltage_time_sel() calculates the amount of delay
> needed as the result of setting a new voltage.  Essentially this is the
> absolute difference of the old and new voltages, divided by the slew rate.
> 
> The implementation of spmi_regulator_set_voltage_time_sel() is wrong.
> 
> It attempts to calculate the difference in voltages by using the
> difference in selectors and multiplying by the voltage step between
> selectors.  This ignores the possibility that the old and new selectors
> might be from different ranges, which have different step values.  Also,
> the difference between the selectors may encapsulate N ranges inbetween,
> so a summation of each selector change from old to new would be needed.
> 
> Lets avoid all of that complexity, and just get the actual voltage
> represented by both the old and new selector, and use those to directly
> compute the voltage delta.  This is more straight forward, and has the
> side benifit of avoiding issues with regulator implementations that don't
> have hardware register support to get the current configured range.
> 
> Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
> Reported-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Reported-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@...il.com>

Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>

> ---
>  drivers/regulator/qcom_spmi-regulator.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
> index 13f83be50076..877df33e0246 100644
> --- a/drivers/regulator/qcom_spmi-regulator.c
> +++ b/drivers/regulator/qcom_spmi-regulator.c
> @@ -813,14 +813,10 @@ static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
>  		unsigned int old_selector, unsigned int new_selector)
>  {
>  	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> -	const struct spmi_voltage_range *range;
>  	int diff_uV;
>  
> -	range = spmi_regulator_find_range(vreg);
> -	if (!range)
> -		return -EINVAL;
> -
> -	diff_uV = abs(new_selector - old_selector) * range->step_uV;
> +	diff_uV = abs(spmi_regulator_common_list_voltage(rdev, new_selector) -
> +		      spmi_regulator_common_list_voltage(rdev, old_selector));
>  
>  	return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
>  }
> -- 
> 2.17.1
>