[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190620174339.446168639@linuxfoundation.org>
Date: Thu, 20 Jun 2019 19:57:35 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.14 33/45] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs
[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]
The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:
ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff
According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.
Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index abfb9faadbc4..9b1906a65e11 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1458,6 +1458,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
sh_eth_get_stats(ndev);
sh_eth_reset(ndev);
+ /* Set the RMII mode again if required */
+ if (mdp->cd->rmiimode)
+ sh_eth_write(ndev, 0x1, RMIIMODE);
+
/* Set MAC address again */
update_mac_address(ndev);
}
--
2.20.1
Powered by blists - more mailing lists