linux-kernel - [PATCH 2/2] pinctrl: ocelot: fix pinmuxing for pins after 31

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190620183037.29652-2-alexandre.belloni@bootlin.com>
Date:   Thu, 20 Jun 2019 20:30:37 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Linus Walleij <linus.walleij@...aro.org>
Cc:     linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH 2/2] pinctrl: ocelot: fix pinmuxing for pins after 31

The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.

Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
 drivers/pinctrl/pinctrl-ocelot.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index d2478db975bd..fb76fb2e9ea5 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -396,7 +396,7 @@ static int ocelot_pin_function_idx(struct ocelot_pinctrl *info,
 	return -1;
 }
 
-#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+#define REG_ALT(msb, info, p) (OCELOT_GPIO_ALT0 * (info)->stride + 4 * ((msb) + ((info)->stride * ((p) / 32))))
 
 static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 				 unsigned int selector, unsigned int group)
@@ -412,19 +412,21 @@ static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 
 	/*
 	 * f is encoded on two bits.
-	 * bit 0 of f goes in BIT(pin) of ALT0, bit 1 of f goes in BIT(pin) of
-	 * ALT1
+	 * bit 0 of f goes in BIT(pin) of ALT[0], bit 1 of f goes in BIT(pin) of
+	 * ALT[1]
 	 * This is racy because both registers can't be updated at the same time
 	 * but it doesn't matter much for now.
 	 */
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(0, info, pin->pin),
 			   BIT(p), f << p);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(1, info, pin->pin),
 			   BIT(p), f << (p - 1));
 
 	return 0;
 }
 
+#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+
 static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
 				     struct pinctrl_gpio_range *range,
 				     unsigned int pin, bool input)
@@ -445,9 +447,9 @@ static int ocelot_gpio_request_enable(struct pinctrl_dev *pctldev,
 	struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	unsigned int p = offset % 32;
 
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, offset),
+	regmap_update_bits(info->map, REG_ALT(0, info, offset),
 			   BIT(p), 0);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, offset),
+	regmap_update_bits(info->map, REG_ALT(1, info, offset),
 			   BIT(p), 0);
 
 	return 0;
-- 
2.21.0