[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190620121025.GB19295@kroah.com>
Date: Thu, 20 Jun 2019 14:10:25 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Yinbo Zhu <yinbo.zhu@....com>
Cc: Alan Stern <stern@...land.harvard.edu>, xiaobo.xie@....com,
jiafei.pan@....com,
Ramneek Mehresh <ramneek.mehresh@...escale.com>,
Nikhil Badola <nikhil.badola@...escale.com>,
Ran Wang <ran.wang_1@....com>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 4/5] usb: host: Stops USB controller init if PLL fails
to lock
On Fri, Jun 14, 2019 at 04:54:32PM +0800, Yinbo Zhu wrote:
> From: Ramneek Mehresh <ramneek.mehresh@...escale.com>
>
> USB erratum-A006918 workaround tries to start internal PHY inside
> uboot (when PLL fails to lock). However, if the workaround also
> fails, then USB initialization is also stopped inside Linux.
> Erratum-A006918 workaround failure creates "fsl,erratum_a006918"
> node in device-tree. Presence of this node in device-tree is
> used to stop USB controller initialization in Linux
>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@...escale.com>
> Signed-off-by: Suresh Gupta <suresh.gupta@...escale.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@....com>
> ---
> Change in v7:
> keep v5 version "fall through"
>
> drivers/usb/host/ehci-fsl.c | 9 +++++++++
> drivers/usb/host/fsl-mph-dr-of.c | 3 ++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index 8f3bf3efb038..ef3dfd33a62e 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -236,6 +236,15 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> portsc |= PORT_PTS_PTW;
> /* fall through */
> case FSL_USB2_PHY_UTMI:
> + /* Presence of this node "has_fsl_erratum_a006918"
> + * in device-tree is used to stop USB controller
> + * initialization in Linux
> + */
> + if (pdata->has_fsl_erratum_a006918) {
> + dev_warn(dev, "USB PHY clock invalid\n");
> + return -EINVAL;
> + }
> +
You need a /* fall through */ comment here, right?
thanks,
greg k-h
Powered by blists - more mailing lists