Date:   Sun, 23 Jun 2019 00:04:29 -0700
From:   Atish Patra <atish.patra@....com>
To:     Troy Benjegerdes <troy.benjegerdes@...ive.com>
Cc:     "linux-riscv@...ts.infradead.org" <linux-riscv@...ts.infradead.org>,
        "sachin.ghadi@...ive.com" <sachin.ghadi@...ive.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "paul.walmsley@...ive.com" <paul.walmsley@...ive.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "aou@...s.berkeley.edu" <aou@...s.berkeley.edu>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "yash.shah@...ive.com" <yash.shah@...ive.com>,
        "palmer@...ive.com" <palmer@...ive.com>
Subject: Re: [PATCH v2] riscv: dts: Add DT node for SiFive FU540 Ethernet
 controller driver

On 6/21/19 6:57 PM, Troy Benjegerdes wrote:
> 
> 
>> On Jun 21, 2019, at 7:33 PM, Troy Benjegerdes <troy.benjegerdes@...ive.com> wrote:
>>
>>
>>
>>> On Jun 21, 2019, at 4:59 PM, Atish Patra <Atish.Patra@....com> wrote:
>>>
>>> On Fri, 2019-06-21 at 14:46 -0700, Atish Patra wrote:
>>>> On Fri, 2019-06-21 at 14:18 -0500, Troy Benjegerdes wrote:
>>>>> Can you post the fsbl and other images you used to boot/test this?
>>>>>
>>>>
>>>
>>> Resending it without the attachment. Obviously, the mail did not go
>>> through with the binary blob attached :( :(. My bad.
>>>
>>> Let me know if you still want me to share the binary with you. I will
>>> probably share it via some other method.
>>
>> The bl came through as it was sent direct to me, and I can deal with
>> the tftp config manually. I have a kernel image, but not the boot.scr.uimg
>> that it looks like you are using. Is that from Yocto?
> 
> I got console output, after extracting the boot script from yocto.
> 

Glad it worked for you.
> The important part seems to be calling
> ‘bootm $kernel_addr_r - $fdt_addr_r’
> 
> Which maybe leads into a discussion of what can we do to at
> least output some sort of useful debug information if the device
> tree is not found or invalid?
> 
At least serial & clock needs to be correct for uart to work so that 
useful debug information can be displayed.

> I’d also like to propose that on RiscV, we use the chosen node
> for kernel command line
and initrd location (like qemu does), and
> in u-boot, default to always passing the device tree from bootm
> and other commands (like bootelf)
> 

If I understand you correctly, you want a kernel command line with fixed 
initrd location set in chosen node that U-Boot can pass on to kernel ?

If that's the case, that's not feasible as everybody's kernel command 
line may not be same and will probably override it using CONFIG_CMDLINE.

So I don't see the point int setting a fixed one. What's the advantage 
in doing that ?

>>
>>>
>>>> I have not changed fsbl. It's the default one came with the board.
>>>> Here are the heads of OpenSBI + U-Boot + Linux repo.
>>>>
>>>> OpenSBI: cd2dfdc870ed (master)
>>>> U-boot: 77f6e2dd0551 + Anup's patch series (v4)
>>>> https://github.com/atishp04/u-boot/tree/unleashed_working
>>>>
>>>> Linux: bed3c0d84e7e + Yash's Macb Series + this patch
>>>> https://github.com/atishp04/linux/tree/5.2-rc6-pre
>>>>
>>>> I have also attached the OpenSBI + U-boot binary as well. But this is
>>>> pre-configured with my tftpboot server. You need to change that.
>>>>
>>>>> I keep running into various failures when I build from source and I
>>>>> want to rule out potential hardware issues related to clock and/or
>>>>> ddr initialization
>>>>>
>>>>> On Fri, Jun 21, 2019, 2:14 PM Atish Patra <Atish.Patra@....com>
>>>>> wrote:
>>>>>> On Fri, 2019-06-21 at 16:23 +0530, Yash Shah wrote:
>>>>>>> DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver
>>>>>> added
>>>>>>> Signed-off-by: Yash Shah <yash.shah@...ive.com>
>>>>>>> ---
>>>>>>> arch/riscv/boot/dts/sifive/fu540-c000.dtsi          | 16
>>>>>>> ++++++++++++++++
>>>>>>> arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts |  9
>>>>>> +++++++++
>>>>>>> 2 files changed, 25 insertions(+)
>>>>>>>
>>>>>>> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>>>> b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>>>> index 4e8fbde..c53b4ea 100644
>>>>>>> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>>>> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>>>> @@ -225,5 +225,21 @@
>>>>>>>                      #address-cells = <1>;
>>>>>>>                      #size-cells = <0>;
>>>>>>>              };
>>>>>>> +             eth0: ethernet@...90000 {
>>>>>>> +                     compatible = "sifive,fu540-macb";
>>>>>>> +                     interrupt-parent = <&plic0>;
>>>>>>> +                     interrupts = <53>;
>>>>>>> +                     reg = <0x0 0x10090000 0x0 0x2000
>>>>>>> +                            0x0 0x100a0000 0x0 0x1000>;
>>>>>>> +                     reg-names = "control";
>>>>>>> +                     status = "disabled";
>>>>>>> +                     local-mac-address = [00 00 00 00 00 00];
>>>>>>> +                     clock-names = "pclk", "hclk";
>>>>>>> +                     clocks = <&prci PRCI_CLK_GEMGXLPLL>,
>>>>>>> +                              <&prci PRCI_CLK_GEMGXLPLL>;
>>>>>>> +                     #address-cells = <1>;
>>>>>>> +                     #size-cells = <0>;
>>>>>>> +             };
>>>>>>> +
>>>>>>>      };
>>>>>>> };
>>>>>>> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-
>>>>>>> a00.dts
>>>>>>> b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>>>> index 4da8870..d783bf2 100644
>>>>>>> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>>>> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>>>> @@ -63,3 +63,12 @@
>>>>>>>              disable-wp;
>>>>>>>      };
>>>>>>> };
>>>>>>> +
>>>>>>> +&eth0 {
>>>>>>> +     status = "okay";
>>>>>>> +     phy-mode = "gmii";
>>>>>>> +     phy-handle = <&phy1>;
>>>>>>> +     phy1: ethernet-phy@0 {
>>>>>>> +             reg = <0>;
>>>>>>> +     };
>>>>>>> +};
>>>>>>
>>>>>> Thanks. I am able to boot Unleashed with networking enabled with
>>>>>> this
>>>>>> patch.
>>>>>>
>>>>>> FWIW,
>>>>>> Tested-by: Atish Patra <atish.patra@....com>
>>>>>>
>>>>>> Regards,
>>>>>> Atish
>>>>>> _______________________________________________
>>>>>> linux-riscv mailing list
>>>>>> linux-riscv@...ts.infradead.org
>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
> 
> 


-- 
Regards,
Atish

Powered by blists - more mailing lists