[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR04MB41581F96118B9FD33636C63DE9E00@VI1PR04MB4158.eurprd04.prod.outlook.com>
Date: Mon, 24 Jun 2019 04:05:42 +0000
From: Yinbo Zhu <yinbo.zhu@....com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Alan Stern <stern@...land.harvard.edu>,
Xiaobo Xie <xiaobo.xie@....com>,
Jiafei Pan <jiafei.pan@....com>,
Ramneek Mehresh <ramneek.mehresh@...escale.com>,
Nikhil Badola <nikhil.badola@...escale.com>,
Ran Wang <ran.wang_1@....com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [EXT] Re: [PATCH v7 4/5] usb: host: Stops USB controller init if
PLL fails to lock
> -----Original Message-----
> From: Greg Kroah-Hartman [mailto:gregkh@...uxfoundation.org]
> Sent: 2019年6月20日 20:10
> To: Yinbo Zhu <yinbo.zhu@....com>
> Cc: Alan Stern <stern@...land.harvard.edu>; Xiaobo Xie <xiaobo.xie@....com>;
> Jiafei Pan <jiafei.pan@....com>; Ramneek Mehresh
> <ramneek.mehresh@...escale.com>; Nikhil Badola
> <nikhil.badola@...escale.com>; Ran Wang <ran.wang_1@....com>;
> linux-usb@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: [EXT] Re: [PATCH v7 4/5] usb: host: Stops USB controller init if PLL fails to
> lock
>
> Caution: EXT Email
>
> On Fri, Jun 14, 2019 at 04:54:32PM +0800, Yinbo Zhu wrote:
> > From: Ramneek Mehresh <ramneek.mehresh@...escale.com>
> >
> > USB erratum-A006918 workaround tries to start internal PHY inside
> > uboot (when PLL fails to lock). However, if the workaround also fails,
> > then USB initialization is also stopped inside Linux.
> > Erratum-A006918 workaround failure creates "fsl,erratum_a006918"
> > node in device-tree. Presence of this node in device-tree is used to
> > stop USB controller initialization in Linux
> >
> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@...escale.com>
> > Signed-off-by: Suresh Gupta <suresh.gupta@...escale.com>
> > Signed-off-by: Yinbo Zhu <yinbo.zhu@....com>
> > ---
> > Change in v7:
> > keep v5 version "fall through"
> >
> > drivers/usb/host/ehci-fsl.c | 9 +++++++++
> > drivers/usb/host/fsl-mph-dr-of.c | 3 ++-
> > 2 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> > index 8f3bf3efb038..ef3dfd33a62e 100644
> > --- a/drivers/usb/host/ehci-fsl.c
> > +++ b/drivers/usb/host/ehci-fsl.c
> > @@ -236,6 +236,15 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> > portsc |= PORT_PTS_PTW;
> > /* fall through */
> > case FSL_USB2_PHY_UTMI:
> > + /* Presence of this node "has_fsl_erratum_a006918"
> > + * in device-tree is used to stop USB controller
> > + * initialization in Linux
> > + */
> > + if (pdata->has_fsl_erratum_a006918) {
> > + dev_warn(dev, "USB PHY clock invalid\n");
> > + return -EINVAL;
> > + }
> > +
>
> You need a /* fall through */ comment here, right?
>
HI greg k-h.
Thanks your feedback!
Yes ,it is needed, because this case doesn't have break, in addition I will add a "/* fall through*/" in
case FSL_USB2_PHY_UTMI, please you note.
Thanks
Best Regards,
Yinbo Zhu.
> thanks,
>
> greg k-h
Powered by blists - more mailing lists