[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190624061603.1704-2-palmer@sifive.com>
Date: Sun, 23 Jun 2019 23:16:02 -0700
From: Palmer Dabbelt <palmer@...ive.com>
To: davem@...emloft.net
Cc: nicolas.ferre@...rochip.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Palmer Dabbelt <palmer@...ive.com>
Subject: [PATCH 1/2] net: macb: Fix compilation on systems without COMMON_CLK
The patch to add support for the FU540-C000 added a dependency on
COMMON_CLK, but didn't express that via Kconfig. This fixes the build
failure by adding CONFIG_MACB_FU540, which depends on COMMON_CLK and
conditionally enables the FU540-C000 support.
I've built this with a powerpc allyesconfig (which pointed out the bug)
and on RISC-V, manually checking to ensure the code was built. I
haven't even booted the resulting kernels.
Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Palmer Dabbelt <palmer@...ive.com>
---
drivers/net/ethernet/cadence/Kconfig | 11 +++++++++++
drivers/net/ethernet/cadence/macb_main.c | 12 ++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 1766697c9c5a..74ee2bfd2369 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -40,6 +40,17 @@ config MACB_USE_HWSTAMP
---help---
Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
+config MACB_FU540
+ bool "Enable support for the SiFive FU540 clock controller"
+ depends on MACB && COMMON_CLK
+ default y
+ ---help---
+ Enable support for the MACB/GEM clock controller on the SiFive
+ FU540-C000. This device is necessary for switching between 10/100
+ and gigabit modes on the FU540-C000 SoC, without which it is only
+ possible to bring up the Ethernet link in whatever mode the
+ bootloader probed.
+
config MACB_PCI
tristate "Cadence PCI MACB/GEM support"
depends on MACB && PCI && COMMON_CLK
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index c545c5b435d8..a903dfdd4183 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -41,6 +41,7 @@
#include <linux/pm_runtime.h>
#include "macb.h"
+#ifdef CONFIG_MACB_FU540
/* This structure is only used for MACB on SiFive FU540 devices */
struct sifive_fu540_macb_mgmt {
void __iomem *reg;
@@ -49,6 +50,7 @@ struct sifive_fu540_macb_mgmt {
};
static struct sifive_fu540_macb_mgmt *mgmt;
+#endif
#define MACB_RX_BUFFER_SIZE 128
#define RX_BUFFER_MULTIPLE 64 /* bytes */
@@ -3956,6 +3958,7 @@ static int at91ether_init(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_MACB_FU540
static unsigned long fu540_macb_tx_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -4056,7 +4059,9 @@ static int fu540_c000_init(struct platform_device *pdev)
return macb_init(pdev);
}
+#endif
+#ifdef CONFIG_MACB_FU540
static const struct macb_config fu540_c000_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
MACB_CAPS_GEM_HAS_PTP,
@@ -4065,6 +4070,7 @@ static const struct macb_config fu540_c000_config = {
.init = fu540_c000_init,
.jumbo_max_len = 10240,
};
+#endif
static const struct macb_config at91sam9260_config = {
.caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
@@ -4155,7 +4161,9 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,emac", .data = &emac_config },
{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
+#ifdef CONFIG_MACB_FU540
{ .compatible = "sifive,fu540-macb", .data = &fu540_c000_config },
+#endif
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, macb_dt_ids);
@@ -4363,7 +4371,9 @@ static int macb_probe(struct platform_device *pdev)
err_disable_clocks:
clk_disable_unprepare(tx_clk);
+#ifdef CONFIG_MACB_FU540
clk_unregister(tx_clk);
+#endif
clk_disable_unprepare(hclk);
clk_disable_unprepare(pclk);
clk_disable_unprepare(rx_clk);
@@ -4398,7 +4408,9 @@ static int macb_remove(struct platform_device *pdev)
pm_runtime_dont_use_autosuspend(&pdev->dev);
if (!pm_runtime_suspended(&pdev->dev)) {
clk_disable_unprepare(bp->tx_clk);
+#ifdef CONFIG_MACB_FU540
clk_unregister(bp->tx_clk);
+#endif
clk_disable_unprepare(bp->hclk);
clk_disable_unprepare(bp->pclk);
clk_disable_unprepare(bp->rx_clk);
--
2.21.0
Powered by blists - more mailing lists