linux-kernel - RE: [PATCH] usb: dwc3: Enable the USB snooping

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VE1PR04MB66557834D3588FC8B558950AF1E00@VE1PR04MB6655.eurprd04.prod.outlook.com>
Date:   Mon, 24 Jun 2019 01:45:13 +0000
From:   Ran Wang <ran.wang_1@....com>
To:     Felipe Balbi <balbi@...nel.org>, Rob Herring <robh+dt@...nel.org>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "open list:DESIGNWARE USB3 DRD IP DRIVER" <linux-usb@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        Leo Li <leoyang.li@....com>
Subject: RE: [PATCH] usb: dwc3: Enable the USB snooping

Hi Felipe,

On Monday, June 17, 2019 20:53, Felipe Balbi wrote:
> Hi,
> 
> Ran Wang <ran.wang_1@....com> writes:
> > Hi Felipe,
> >
> > On Thursday, May 30, 2019 17:09, Ran Wang wrote:
> >>
> >> <snip>
> >> > >> >> >  /* Global Debug Queue/FIFO Space Available Register */
> >> > >> >> >  #define DWC3_GDBGFIFOSPACE_NUM(n)	((n) & 0x1f)
> >> > >> >> >  #define DWC3_GDBGFIFOSPACE_TYPE(n)	(((n) << 5) & 0x1e0)
> >> > >> >> > @@ -859,6 +867,7 @@ struct dwc3_scratchpad_array {
> >> > >> >> >   * 	3	- Reserved
> >> > >> >> >   * @imod_interval: set the interrupt moderation interval in 250ns
> >> > >> >> >   *                 increments or 0 to disable.
> >> > >> >> > + * @dma_coherent: set if enable dma-coherent.
> >> > >> >>
> >> > >> >> you're not enabling dma coherency, you're enabling cache snooping.
> >> > >> >> And this property should describe that. Also, keep in mind
> >> > >> >> that different devices may want different cache types for
> >> > >> >> each of those fields, so your property would have to be a lot
> >> > >> >> more complex. Something
> >> > like:
> >> > >> >>
> >> > >> >> 	snps,cache-type = <foobar "cacheable">, <baz "cacheable">, ...
> >> > >> >>
> >> > >> >> Then driver would have to parse this properly to setup GSBUSCFG0.
> >> > >
> >> > > According to the DesignWare Cores SuperSpeed USB 3.0 Controller
> >> > > Databook (v2.60a), it has described Type Bit Assignments for all
> >> > > supported
> >> > master bus type:
> >> > > AHB, AXI3, AXI4 and Native. I found the bit definition are
> >> > > different among
> >> > them.
> >> > > So, for the example you gave above, feel a little bit confused.
> >> > > Did you mean:
> >> > >     snps,cache-type = <DATA_RD  "write allocate">, <DESC_RD
> >> > > "cacheable">, <DATA_WR  "bufferable">, <DESC_WR  "read allocate">
> >> >
> >> > yeah, something like that.
> >>
> >> I think DATA_RD  should be a macro, right? So, where I can put its define?
> >> Create a dwc3.h in include/dt-bindings/usb/ ?
> >
> > Could you please give me some advice here? I'd like to prepare next
> > version patch after getting this settled.
> >
> >> Another question about this remain open is: DWC3 data book's Table
> >> 6-5 Cache Type Bit Assignments show that bits definition will differ
> >> per MBUS_TYPEs as
> >> below:
> >> ----------------------------------------------------------------
> >>  MBUS_TYPE| bit[3]       |bit[2]       |bit[1]     |bit[0]
> >>  ----------------------------------------------------------------
> >>  AHB      |Cacheable     |Bufferable   |Privilegge |Data
> >>  AXI3     |Write Allocate|Read Allocate|Cacheable  |Bufferable
> >>  AXI4     |Allocate Other|Allocate     |Modifiable |Bufferable
> >>  AXI4     |Other Allocate|Allocate     |Modifiable |Bufferable
> >>  Native   |Same as AXI   |Same as AXI  |Same as AXI|Same as AXI
> >>  ----------------------------------------------------------------
> >>  Note: The AHB, AXI3, AXI4, and PCIe busses use different names for
> >> certain  signals, which have the same meaning:
> >>    Bufferable = Posted
> >>    Cacheable = Modifiable = Snoop (negation of No Snoop)
> >>
> >> For Layerscape SoCs, MBUS_TYPE is AXI3. So I am not sure how to use
> >> snps,cache-type = <DATA_RD  "write allocate">, to cover all MBUS_TYPE?
> >> (you can notice that AHB and AXI3's cacheable are on different bit)
> >> Or I just need to handle AXI3 case?
> >
> > Also on this open. Thank you in advance.
> 
> You could pass two strings and let the driver process them. Something
> like:
> 
> 	snps,cache_type = <"data_wr" "write allocate">, <"desc_rd"
> "cacheable">...
> 
> And so on. The only thing missing is for the mbus_type to be known by the driver.
> Is that something we can figure out on any of the HWPARAMS registers or does
> it have to be told explicitly?

I have checked Layerscape Reference manual, HWPARAMS0~8 doesn't contain mbus_type
Info, and I didn't know where have declared it explicitly.

> Another option would be to pass a string followed by one hex digit for the bits:
> 
> 	snps,cache_type = <"data_wr" 0x8>, <"desc_rd" 0x2>...;
> 
> Then we don't need to describe mbus_type since the bits are what matters.

Yes, it's also what we prefer to use, it will be more flexible, I can add above Table
6-5 Cache Type Bit Assignments in binding to help user decide which value they
would use.

I would submit another version of patch for further review, thank you very much.

Regards,
Ran

> Rob, any comments?
> 
> --
> balbi