lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v67sf3L9zH9Li6tF3xunQ4-isoodBLQmSv2VJtAj6hS7Ug@mail.gmail.com>
Date:   Mon, 24 Jun 2019 18:34:29 +0800
From:   Chen-Yu Tsai <wens@...nel.org>
To:     Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     Chen-Yu Tsai <wens@...nel.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Alessandro Zummo <a.zummo@...ertech.it>,
        Vincent Donnefort <vdonnefort@...il.com>,
        linux-rtc@...r.kernel.org, devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/3] rtc: pcf8563: Fix unhandled interrupt storm

On Fri, Jun 21, 2019 at 12:22 AM Alexandre Belloni
<alexandre.belloni@...tlin.com> wrote:
>
> On 04/06/2019 12:23:34+0800, Chen-Yu Tsai wrote:
> > From: Chen-Yu Tsai <wens@...e.org>
> >
> > Hi everyone,
> >
> > While bringing up my Pine H64, I encountered an interrupt storm from the
> > pcf8563 RTC. The RTC chip's interrupt line is shared with the PMIC, and
> > was not properly added to the device tree. Also, the driver was using an
> > trigger method incompatible with the PMIC, preventing the interrupt line
> > from being shared. Last, the driver only clears and masks the alarm
> > interrupt, while leaving the timer interrupt untouched. This is a
> > problem if previous systems left the timer interrupt enabled, and there
> > was an interrupt pending.
> >
> > This patch set fixes all three issues, one per patch.
> >
> > Please have a look.
> >
>
> I don't have that particular RTC so I can't test but the interrupt
> handling in pcf8563_irq seems problematic too. I guess the RTC will only
> trigger once per second because the call to pcf8563_set_alarm_mode will
> explicitely leave the alarm enabled. The core doesn't really care but it
> doesn't really expect the alarm to stay enabled. i.e. It will ensure the
> alarm is enabled again after setting it when necessary. I think it would
> be safer to simply clear both AIE and AF here. Could you test?

Yeah, that bit looked weird to me as well. And actually the alarm doesn't
go down to the second, only the minute.

Is there a test program I can use to test the alarms?

Thanks
ChenYu

> > Chen-Yu Tsai (3):
> >   rtc: pcf8563: Fix interrupt trigger method
> >   rtc: pcf8563: Clear event flags and disable interrupts before
> >     requesting irq
> >   arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC
> >
> >  .../arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts |  2 ++
> >  drivers/rtc/rtc-pcf8563.c                           | 13 ++++++-------
> >  2 files changed, 8 insertions(+), 7 deletions(-)
> >
> > --
> > 2.20.1
> >
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ