| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAEnQRZBOjSAMSAZAFvtjWhYGHc=27_tkWZ0a_vB=-bStuF-b2A@mail.gmail.com>
Date: Mon, 24 Jun 2019 13:40:53 +0300
From: Daniel Baluta <daniel.baluta@...il.com>
To: Andra Danciu <andradanciu1997@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>, leoyang.li@....com,
Aisheng Dong <aisheng.dong@....com>, sriram.dash@....com,
pramod.kumar_1@....com, bhaskar.upadhaya@....com,
vabhav.sharma@....com, pankaj.bansal@....com,
richard.hu@...hnexion.com, Lucas Stach <l.stach@...gutronix.de>,
Jacky Bai <ping.bai@....com>, manivannan.sadhasivam@...aro.org,
Devicetree List <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Daniel Baluta <daniel.baluta@....com>
Subject: Re: [RFC PATCH] arm64: dts: fsl: wandboard: Add a device tree for the PICO-PI-IMX8M
Hi Andra,
Few comments inline.
On Thu, Jun 20, 2019 at 4:35 PM Andra Danciu <andradanciu1997@...il.com> wrote:
>
> From: Richard Hu <richard.hu@...hnexion.com>
>
> The current level of support yields a working console and is able to boot
> userspace from an initial ramdisk copied via u-boot in RAM.
>
> Additional subsystems that are active :
> - Ethernet
> - USB
>
> Cc: Daniel Baluta <daniel.baluta@....com>
> Signed-off-by: Richard Hu <richard.hu@...hnexion.com>
> Signed-off-by: Andra Danciu <andradanciu1997@...il.com>
> ---
> I am using pico-pi-8mxm board to work on my project for Google Summer of Code.
> This is based on patches from https://github.com/wandboard-org.
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> arch/arm64/boot/dts/freescale/wand-pi-8m.dts | 590 +++++++++++++++++++++++++++
> 2 files changed, 591 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/wand-pi-8m.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 984554343c83..5904d6a8a033 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -23,3 +23,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> +dtb-$(CONFIG_ARCH_MXC) += wand-pi-8m.dtb
> diff --git a/arch/arm64/boot/dts/freescale/wand-pi-8m.dts b/arch/arm64/boot/dts/freescale/wand-pi-8m.dts
> new file mode 100644
> index 000000000000..9f7121014722
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/wand-pi-8m.dts
> @@ -0,0 +1,590 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 Wandboard, Org.
> + * Copyright 2017 NXP
> + *
> + * Author: Richard Hu <hakahu@...il.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mq.dtsi"
> +
> +/ {
> + model = "WAND-PI-8M";
> + compatible = "wand,imx8mq-wand-pi", "fsl,imx8mq";
> +
> + chosen {
> + bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
> + stdout-path = &uart1;
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usb_otg_vbus: usb_otg_vbus {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_otg_vbus>;
> + compatible = "regulator-fixed";
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + regulator-virtuals {
> + compatible = "simple-bus";
> +
> + virt-buck1 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck1";
> + };
> + virt-buck2 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck2";
> + };
> + virt-buck3 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck3";
> + };
> + virt-buck4 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck4";
> + };
> + virt-buck5 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck5";
> + };
> + virt-buck6 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck6";
> + };
> + virt-buck7 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck7";
> + };
> + virt-buck8 {
> + compatible = "regulator-virtual";
> + virtual-supply = "buck8";
> + };
> + virt-ldo1 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo1";
> + };
> + virt-ldo2 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo2";
> + };
> + virt-ldo3 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo3";
> + };
> + virt-ldo4 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo4";
> + };
> + virt-ldo5 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo5";
> + };
> + virt-ldo6 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo6";
> + };
> + virt-ldo7 {
> + compatible = "regulator-virtual";
> + virtual-supply = "ldo7";
> + };
> + };
> +
> + gpio-edm {
> + compatible = "gpio-edm";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wifi_ctrl>;
> +
> + gpio_wifi_wl_reg_on {
> + label = "WL_REG_ON";
> + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
> + dir = "out";
> + };
> +
> + gpio_wifi_pwr_en {
> + label = "WIFI_PWR_EN";
> + gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
> + dir = "out";
> + };
> + };
For the basic support we don't need gpio wifi nodes. Please remove them,
we can add them later.
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + wand-pi-8m {
> + pinctrl_otg_vbus: otgvbusgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* USB OTG VBUS Enable */
> + >;
> + };
> +
> + pinctrl_csi1: csi1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* CSI P1 PWDN */
> + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 /* CSI nRST */
> + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x59
> + >;
> + };
No need for pinctrl_csi1 node.
> +
> + pinctrl_enet_3v3: enet3v3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49
> + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2grpgpio {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> +
> + pinctrl_pmic: pmicirq {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
> + >;
> + };
> +
> + pinctrl_wifi_ctrl: wifi_ctrlgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* WL_REG_ON */
> + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* WIFI_PWR_EN */
> + >;
No need for pinctrl_wifi_ctrl node also.
> + };
> +
> + pinctrl_tusb320_irq: tusb320_irqgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x41
> + >;
> + };
> +
> + pinctrl_typec_ss_sel: typec_ss_selgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19
> + >;
> + };
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>;
> + phy-mode = "rgmii-id";
> + pinctrl-assert-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + at803x,led-act-blind-workaround;
> + at803x,eee-disabled;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + typec_tusb320:tusb320@47 {
> + compatible = "ti,tusb320";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tusb320_irq &pinctrl_typec_ss_sel>;
> + reg = <0x47>;
> + vbus-supply = <®_usb_otg_vbus>;
> + ss-sel-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
> + tusb320,int-gpio = <&gpio3 6 GPIO_ACTIVE_LOW>;
> + tusb320,select-mode = <0>;
> + tusb320,dfp-power = <0>;
> + };
> +
> + pmic: bd71837@4b {
> + reg = <0x4b>;
> + compatible = "rohm,bd71837";
> + /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
> + pinctrl-0 = <&pinctrl_pmic>;
> + gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
> +
> + bd71837,pmic-buck1-uses-i2c-dvs;
> + bd71837,pmic-buck1-dvs-voltage = <900000>, <850000>, <800000>; /* VDD_SOC: Run-Idle-Suspend */
> + bd71837,pmic-buck2-uses-i2c-dvs;
> + bd71837,pmic-buck2-dvs-voltage = <1000000>, <900000>, <0>; /* VDD_ARM: Run-Idle */
> + bd71837,pmic-buck3-uses-i2c-dvs;
> + bd71837,pmic-buck3-dvs-voltage = <1000000>, <0>, <0>; /* VDD_GPU: Run */
> + bd71837,pmic-buck4-uses-i2c-dvs;
> + bd71837,pmic-buck4-dvs-voltage = <1000000>, <0>, <0>; /* VDD_VPU: Run */
> +
> + gpo {
> + rohm,drv = <0x0C>; /* 0b0000_1100 all gpos with cmos output mode */
> + };
> +
> + regulators {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + buck1_reg: regulator@0 {
> + reg = <0>;
> + regulator-compatible = "buck1";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + };
> +
> + buck2_reg: regulator@1 {
> + reg = <1>;
> + regulator-compatible = "buck2";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + };
> +
> + buck3_reg: regulator@2 {
> + reg = <2>;
> + regulator-compatible = "buck3";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck4_reg: regulator@3 {
> + reg = <3>;
> + regulator-compatible = "buck4";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5_reg: regulator@4 {
> + reg = <4>;
> + regulator-compatible = "buck5";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6_reg: regulator@5 {
> + reg = <5>;
> + regulator-compatible = "buck6";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck7_reg: regulator@6 {
> + reg = <6>;
> + regulator-compatible = "buck7";
> + regulator-min-microvolt = <1605000>;
> + regulator-max-microvolt = <1995000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck8_reg: regulator@7 {
> + reg = <7>;
> + regulator-compatible = "buck8";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1_reg: regulator@8 {
> + reg = <8>;
> + regulator-compatible = "ldo1";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: regulator@9 {
> + reg = <9>;
> + regulator-compatible = "ldo2";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: regulator@10 {
> + reg = <10>;
> + regulator-compatible = "ldo3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: regulator@11 {
> + reg = <11>;
> + regulator-compatible = "ldo4";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: regulator@12 {
> + reg = <12>;
> + regulator-compatible = "ldo5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: regulator@13 {
> + reg = <13>;
> + regulator-compatible = "ldo6";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: regulator@14 {
> + reg = <14>;
> + regulator-compatible = "ldo7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&uart1 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + extcon = <&typec_tusb320>;
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&A53_0 {
> + operating-points = <
> + /* kHz uV */
> + 1500000 1000000
> + 1300000 1000000
> + 1000000 900000
> + 800000 900000
> + >;
> +};
> --
> 2.11.0
>
Powered by blists - more mailing lists