| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Jun 2019 09:57:38 +0800
From: Guo Ren <guoren@...nel.org>
To: Andreas Färber <afaerber@...e.de>
Cc: linux-csky@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org
Subject: Re: [PATCH] csky: dts: Add NationalChip GX6605S
Hi Andreas,
On Tue, Jun 25, 2019 at 9:25 AM Andreas Färber <afaerber@...e.de> wrote:
>
> Am 25.06.19 um 02:45 schrieb Guo Ren:
> > Thx for the patch. No need seperate part into dtsi,
>
> Sorry, I know from many arm contributions that using a .dtsi is the
> right thing here. It logically separates the chip from the board, even
> if there's only one evaluation board currently. Think about set-top
> boxes that someone might author a .dts for - they should be able to
> reuse the .dtsi for the SoC rather than copy it.
gx6605s.dts is simple now, it's unnecessary to seperate it into two
pieces. Other things from you is all OK for me.
>
> > just follow:
> > https://lore.kernel.org/linux-csky/1561376581-19568-1-git-send-email-guoren@kernel.org/T/#u
>
> Thanks for that pointer! I still think my node names are cleaner and
> also the structure of keeping clocks and gpio users outside of /soc. I
> see the value you use is 27 MHz, will try it tomorrow. I see you use
> nice KEY_ constants, whereas I just took the raw values from the dtb.
>
> I notice that your patch doesn't have any Copyright header, how should I
> credit you in the resulting combined patch? I would then also add your
> SoB from the patch you linked to.
Copyright could be the same in arch/csky/kernel/setup.c or add yours
in addition.
>
> More comments inline...
>
> > On Tue, Jun 25, 2019 at 8:28 AM Andreas Färber <afaerber@...e.de> wrote:
> >>
> >> Add Device Trees for NationalChip GX6605S SoC (based on CK610 CPU) and its
> >> dev board. GxLoader expects as filename gx6605s.dtb, so keep that.
> >> The bootargs are prepared to boot from USB and to output to serial.
> >>
> >> Compatibles for the SoC and board are left out for now.
> >>
> >> Signed-off-by: Andreas Färber <afaerber@...e.de>
> >> ---
> >> arch/csky/boot/dts/gx6605s.dts | 104 ++++++++++++++++++++++++++++++++++++++++
> >> arch/csky/boot/dts/gx6605s.dtsi | 82 +++++++++++++++++++++++++++++++
> >> 2 files changed, 186 insertions(+)
> >> create mode 100644 arch/csky/boot/dts/gx6605s.dts
> >> create mode 100644 arch/csky/boot/dts/gx6605s.dtsi
> >>
> >> diff --git a/arch/csky/boot/dts/gx6605s.dts b/arch/csky/boot/dts/gx6605s.dts
> >> new file mode 100644
> >> index 000000000000..f7511024ec6f
> >> --- /dev/null
> >> +++ b/arch/csky/boot/dts/gx6605s.dts
> [...]
> >> + leds {
> >> + compatible = "gpio-leds";
> >> +
> >> + led0 {
> >> + label = "led10";
>
> I forgot to align the numbering here. The label matches the GPIO and
> what is printed on the board.
leds and button is so specific, that's is just a example. You could
keep your own style in the dts.
>
> >> + gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
> >> + linux,default-trigger = "heartbeat";
>
> This green one stops blinking and stays on.
Seems there is no driver for it.
>
> >> + };
> >> +
> >> + led1 {
> >> + label = "led11";
> >> + gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> >> + linux,default-trigger = "timer";
>
> This red one keeps blinking after the panic.
>
> >> + };
> >> +
> >> + led2 {
> >> + label = "led12";
> >> + gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
> >> + linux,default-trigger = "default-on";
> >> + };
> >> +
> >> + led3 {
> >> + label = "led13";
> >> + gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
> >> + linux,default-trigger = "default-on";
>
> These two remain off. So I wonder whether the GPIO polarity is wrong?
> In the example usb.img the gpio-leds module is not loaded by default, so
> maybe it wasn't noticed before?
I try this 1 years ago in linux-4.9 and it need verifying.
>
> Also, many arm boards use more complex LED labels with multiple parts
> separated by colon, like "boardname:name:function" or so.
Name is Ok for me as long as it's correct.
>
> >> + };
> >> + };
> [...]
> >> diff --git a/arch/csky/boot/dts/gx6605s.dtsi b/arch/csky/boot/dts/gx6605s.dtsi
> >> new file mode 100644
> >> index 000000000000..956af5674add
> >> --- /dev/null
> >> +++ b/arch/csky/boot/dts/gx6605s.dtsi
> >> @@ -0,0 +1,82 @@
> >> +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause */
> >> +/*
> >> + * NationalChip GX6605S SoC
> >> + *
> >> + * Copyright (c) 2019 Andreas Färber
> >> + */
> >> +
> >> +/ {
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> +
> >> + cpus {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + cpu0: cpu@0 {
> >> + device_type = "cpu";
> >> + compatible = "csky,ck610";
> >> + reg = <0>;
> >> + };
> >> + };
> >> +
> >> + soc {
> >> + compatible = "simple-bus";
> >> + interrupt-parent = <&intc>;
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + ranges;
> >> +
> >> + timer0: timer@...000 {
> >> + compatible = "csky,gx6605s-timer";
>
> The reason I left out the compatible for the SoC/board is that it looks
> unclean to me that you're using a "csky," vendor prefix for interrupt
> controller and timer instead of a new "nationalchip," prefix for the SoC
> vendor. Did I miss some reasoning for that, or did that slip through
> patch review?
csky is my current company and nationalchip is my prior company. The
gx6605s is belong to nationachip and gx6605s use csky 610 as its CPU.
>
> Being the first board we'd need to create a new YAML file to document
> them, I assume. Not sure what the best scope (=name) would be here.
>
> >> + reg = <0x0020a000 0x400>;
> >> + clocks = <&dummy_apb_clk>;
> >> + interrupts = <10>;
> >> + };
> [...]
> >> + intc: interrupt-controller@...000 {
> >> + compatible = "csky,gx6605s-intc";
>
> Here's the other SoC compatible.
It's defined in irqchip/irq-csky-apb-intc.c.
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
Powered by blists - more mailing lists