linux-kernel - RE: [PATCH v5 2/5] net: macb: add support for sgmii MAC-PHY interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <SN2PR07MB2480B53AFE512F46986A1CAFC1E30@SN2PR07MB2480.namprd07.prod.outlook.com>
Date:   Tue, 25 Jun 2019 09:26:29 +0000
From:   Parshuram Raju Thombare <pthombar@...ence.com>
To:     Russell King - ARM Linux admin <linux@...linux.org.uk>
CC:     "andrew@...n.ch" <andrew@...n.ch>,
        "nicolas.ferre@...rochip.com" <nicolas.ferre@...rochip.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Rafal Ciepiela <rafalc@...ence.com>,
        Anil Joy Varughese <aniljoy@...ence.com>,
        Piotr Sroka <piotrs@...ence.com>
Subject: RE: [PATCH v5 2/5] net: macb: add support for sgmii MAC-PHY interface

>> +	if (change_interface) {
>> +		bp->phy_interface = state->interface;
>> +		gem_writel(bp, NCR, ~GEM_BIT(TWO_PT_FIVE_GIG) &
>> +			   gem_readl(bp, NCR));
>This could do with a comment, such as the one I gave in my example.
Sure. I will add a comment here.

>> @@ -493,6 +516,7 @@ static void gem_mac_config(struct phylink_config
>*pl_config, unsigned int mode,
>>  		reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
>>  		if (macb_is_gem(bp))
>>  			reg &= ~GEM_BIT(GBE);
>> +
>Useless change.
Ok, I will remove this empty line.


>> +		if (phy_mode == PHY_INTERFACE_MODE_SGMII) {
>> +			if (!(bp->caps & MACB_CAPS_PCS))
>> +				interface_supported = 0;
>
>So if bp->caps does not have MACB_CAPS_PCS set, then SGMII mode is not
>supported?
Yes

>In which case, gem_phylink_validate() must clear the support mask when
>SGMII mode is requested to indicate that the interface mode is not
>supported.
>The same goes for _all_ other PHY link modes that the hardware does not
>actually support, such as PHY_INTERFACE_MODE_10GKR...
If interface is not supported by hardware probe returns with error, so we don't 
net interface is not registered at all.
I think what is missing is setting appropriate err value (-ENOTSUPP ?), right now it is returning
default err.



Regards,
Parshuram Thombare