| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190625130231.GA31865@global.cadence.com>
Date: Tue, 25 Jun 2019 14:02:33 +0100
From: Piotr Sroka <piotrs@...ence.com>
To: Dmitry Osipenko <digetx@...il.com>
CC: <linux-kernel@...r.kernel.org>,
Boris Brezillon <bbrezillon@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
"Paul Burton" <paul.burton@...s.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Arnd Bergmann <arnd@...db.de>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Stefan Agner <stefan@...er.ch>, <linux-mtd@...ts.infradead.org>
Subject: Re: [v3 1/2] mtd: nand: Add Cadence NAND controller driver
Hi Dmitry
The 06/16/2019 16:42, Dmitry Osipenko wrote:
>EXTERNAL MAIL
>
>
>14.06.2019 18:09, Piotr Sroka пишет:
>
>Commit description is mandatory.
>
>> Signed-off-by: Piotr Sroka <piotrs@...ence.com>
>> ---
>
>[snip]
>
>> +
>> +/* Cadnence NAND flash controller capabilities get from driver data. */
>> +struct cadence_nand_dt_devdata {
>> + /* Skew value of the output signals of the NAND Flash interface. */
>> + u32 if_skew;
>> + /* It informs if aging feature in the DLL PHY supported. */
>> + u8 phy_dll_aging;
>> + /*
>> + * It informs if per bit deskew for read and write path in
>> + * the PHY is supported.
>> + */
>> + u8 phy_per_bit_deskew;
>> + /* It informs if slave DMA interface is connected to DMA engine. */
>> + u8 has_dma;
>
>There is no needed to dedicate 8 bits to a variable if you only care about a single
>bit. You may write this as:
>
>bool has_dma : 1;
I modified it locally but it looks that checkpatch does not like such
notation
"WARNING: Avoid using bool as bitfield. Prefer bool bitfields as
unsigned int or u<8|16|32>"
So maybe I will leave it as is.
>[snip]
>
>> +static struct
>> +cdns_nand_chip *to_cdns_nand_chip(struct nand_chip *chip)
>> +{
>> + return container_of(chip, struct cdns_nand_chip, chip);
>> +}
>> +
>> +static struct
>> +cdns_nand_ctrl *to_cdns_nand_ctrl(struct nand_controller *controller)
>> +{
>> + return container_of(controller, struct cdns_nand_ctrl, controller);
>> +}
>
>It's better to inline explicitly such cases because they won't get inlined with some
>kernel configurations, like enabled ftracing for example.
>
>> +static bool
>> +cadence_nand_dma_buf_ok(struct cdns_nand_ctrl *cdns_ctrl, const void *buf,
>> + u32 buf_len)
>> +{
>> + u8 data_dma_width = cdns_ctrl->caps2.data_dma_width;
>> +
>> + return buf && virt_addr_valid(buf) &&
>> + likely(IS_ALIGNED((uintptr_t)buf, data_dma_width)) &&
>> + likely(IS_ALIGNED(buf_len, data_dma_width));
>> +}
>> +
>> +static int cadence_nand_wait_for_value(struct cdns_nand_ctrl *cdns_ctrl,
>> + u32 reg_offset, u32 timeout_us,
>> + u32 mask, bool is_clear)
>> +{
>> + u32 val;
>> + int ret = 0;
>> +
>> + ret = readl_poll_timeout(cdns_ctrl->reg + reg_offset,
>> + val, !(val & mask) == is_clear,
>> + 10, timeout_us);
>
>Apparently you don't care about having memory barrier here, hence
>readl_relaxed_poll_timeout().
ok I will update it.
>
>> + if (ret < 0) {
>> + dev_err(cdns_ctrl->dev,
>> + "Timeout while waiting for reg %x with mask %x is clear %d\n",
>> + reg_offset, mask, is_clear);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int cadence_nand_set_ecc_enable(struct cdns_nand_ctrl *cdns_ctrl,
>> + bool enable)
>> +{
>> + u32 reg;
>> +
>> + if (cadence_nand_wait_for_value(cdns_ctrl, CTRL_STATUS,
>> + 1000000,
>> + CTRL_STATUS_CTRL_BUSY, true))
>> + return -ETIMEDOUT;
>> +
>> + reg = readl(cdns_ctrl->reg + ECC_CONFIG_0);
>> +
>> + if (enable)
>> + reg |= ECC_CONFIG_0_ECC_EN;
>> + else
>> + reg &= ~ECC_CONFIG_0_ECC_EN;
>> +
>> + writel(reg, cdns_ctrl->reg + ECC_CONFIG_0);
>
>And here.. looks like there is no need for the memory barries, hence use the relaxed
>versions of readl/writel. Same for the rest of the patch.
>
ok
>> + return 0;
>> +}
>> +
>> +static void cadence_nand_set_ecc_strength(struct cdns_nand_ctrl *cdns_ctrl,
>> + u8 corr_str_idx)
>> +{
>> + u32 reg;
>> +
>> + if (cdns_ctrl->curr_corr_str_idx == corr_str_idx)
>> + return;
>> +
>> + reg = readl(cdns_ctrl->reg + ECC_CONFIG_0);
>> + reg &= ~ECC_CONFIG_0_CORR_STR;
>> + reg |= FIELD_PREP(ECC_CONFIG_0_CORR_STR, corr_str_idx);
>> + writel(reg, cdns_ctrl->reg + ECC_CONFIG_0);
>> +
>> + cdns_ctrl->curr_corr_str_idx = corr_str_idx;
>> +}
>> +
>> +static u8 cadence_nand_get_ecc_strength_idx(struct cdns_nand_ctrl *cdns_ctrl,
>> + u8 strength)
>> +{
>> + u8 i, corr_str_idx = 0;
>> +
>> + for (i = 0; i < BCH_MAX_NUM_CORR_CAPS; i++) {
>> + if (cdns_ctrl->ecc_strengths[i] == strength) {
>> + corr_str_idx = i;
>> + break;
>> + }
>> + }
>
>Is it a error case when i == BCH_MAX_NUM_CORR_CAPS?
Yes it is an error but it could appear only if ECC capability registers
have wrong values. I will handle that error anyway.
>> + return corr_str_idx;
>> +}
>> +
>> +static int cadence_nand_set_skip_marker_val(struct cdns_nand_ctrl *cdns_ctrl,
>> + u16 marker_value)
>> +{
>> + u32 reg = 0;
>> +
>> + if (cadence_nand_wait_for_value(cdns_ctrl, CTRL_STATUS,
>> + 1000000,
>> + CTRL_STATUS_CTRL_BUSY, true))
>> + return -ETIMEDOUT;
>> +
>> + reg = readl(cdns_ctrl->reg + SKIP_BYTES_CONF);
>> + reg &= ~SKIP_BYTES_MARKER_VALUE;
>> + reg |= FIELD_PREP(SKIP_BYTES_MARKER_VALUE,
>> + marker_value);
>> +
>> + writel(reg, cdns_ctrl->reg + SKIP_BYTES_CONF);
>> +
>> + return 0;
>> +}
>> +
>> +static int cadence_nand_set_skip_bytes_conf(struct cdns_nand_ctrl *cdns_ctrl,
>> + u8 num_of_bytes,
>> + u32 offset_value,
>> + int enable)
>> +{
>> + u32 reg = 0;
>> + u32 skip_bytes_offset = 0;
>
>Please don't initialize variables if not necessary. You could also write this in a
>single line.
>
> u32 skip_bytes_offset, reg;
>
>Same for the rest of the patch.
>
Ok to I will change it.
>> + if (cadence_nand_wait_for_value(cdns_ctrl, CTRL_STATUS,
>> + 1000000,
>> + CTRL_STATUS_CTRL_BUSY, true))
>> + return -ETIMEDOUT;
>> +
>> + if (!enable) {
>> + num_of_bytes = 0;
>> + offset_value = 0;
>> + }
>> +
>> + reg = readl(cdns_ctrl->reg + SKIP_BYTES_CONF);
>> + reg &= ~SKIP_BYTES_NUM_OF_BYTES;
>> + reg |= FIELD_PREP(SKIP_BYTES_NUM_OF_BYTES,
>> + num_of_bytes);
>> + skip_bytes_offset = FIELD_PREP(SKIP_BYTES_OFFSET_VALUE,
>> + offset_value);
>> +
>> + writel(reg, cdns_ctrl->reg + SKIP_BYTES_CONF);
>> + writel(skip_bytes_offset, cdns_ctrl->reg + SKIP_BYTES_OFFSET);
>> +
>> + return 0;
>> +}
>> +
>> +/* Fucntions enables/disables hardware detection of erased data */
>
>s/Fucntions/Function/, please use spellchecker. I'd also recommend to start all
>single-line comments with a lower case (and without a dot in the end) because it is a
>more common style in the kernel and is a bit easier for the eyes.
Ok I will do it.
>
>[snip]
Thanks
Piotr Sroka
Powered by blists - more mailing lists