linux-kernel - [PATCH AUTOSEL 5.1 35/51] gpio: pca953x: hack to fix 24 bit gpio expanders

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190626034117.23247-35-sashal@kernel.org>
Date:   Tue, 25 Jun 2019 23:40:51 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     "H. Nikolaus Schaller" <hns@...delico.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Sasha Levin <sashal@...nel.org>, linux-gpio@...r.kernel.org
Subject: [PATCH AUTOSEL 5.1 35/51] gpio: pca953x: hack to fix 24 bit gpio expanders

From: "H. Nikolaus Schaller" <hns@...delico.com>

[ Upstream commit 3b00691cc46a4089368a008b30655a8343411715 ]

24 bit expanders use REG_ADDR_AI in combination with register addressing. This
conflicts with regmap which takes this bit as part of the register number,
i.e. a second cache entry is defined for accessed with REG_ADDR_AI being
set although on the chip it is the same register as with REG_ADDR_AI being
cleared.

The problem was introduced by

	commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function")

but only became visible by

	commit 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")

because before, the regmap size was effectively ignored and
pca953x_writeable_register() did know to ignore REG_ADDR_AI. Still, there
were two separate cache entries created.

Since the use of REG_ADDR_AI seems to be static we can work around this
issue by simply increasing the size of the regmap to cover the "virtual"
registers with REG_ADDR_AI being set. This only means that half of the
regmap buffer will be unused.

Reported-by: H. Nikolaus Schaller <hns@...delico.com>
Suggested-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/gpio/gpio-pca953x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 7e76830b3368..b6f10e56dfa0 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -306,7 +306,8 @@ static const struct regmap_config pca953x_i2c_regmap = {
 	.volatile_reg = pca953x_volatile_register,

 	.cache_type = REGCACHE_RBTREE,
-	.max_register = 0x7f,
+	/* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */
+	.max_register = 0xff,
 };

 static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
-- 
2.20.1