linux-kernel - Re: mgag200 fails kdump kernel booting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190626082907.GY24419@MiWiFi-R3L-srv>
Date:   Wed, 26 Jun 2019 16:29:07 +0800
From:   Baoquan He <bhe@...hat.com>
To:     airlied@...hat.com
Cc:     kexec@...ts.infradead.org, x86@...nel.org,
        linux-kernel@...r.kernel.org, dyoung@...hat.com
Subject: Re: mgag200 fails kdump kernel booting

On 06/26/19 at 04:15pm, Baoquan He wrote:
> Hi Dave,
> 
> We met an kdump kernel boot failure on a lenovo system. Kdump kernel
> failed to boot, but just reset to firmware to reboot system. And nothing
> is printed out.
> 
> The machine is a big server, with 6T memory and many cpu, its graphic
> driver module is mgag200.
> 
> When added 'earlyprintk=ttyS0' into kernel command line, it printed
> out only one line to console during kdump kernel booting:
>      KASLR disabled: 'nokaslr' on cmdline.
> 
> Then reset to firmware to reboot system.
> 
> By further code debugging, the failure happened in
> arch/x86/boot/compressed/misc.c, during kernel decompressing stage. It's
> triggered by the vga printing. As you can see, in __putstr() of
> arch/x86/boot/compressed/misc.c, the code checks if earlyprintk= is
> specified, and print out to the target. And no matter if earlyprintk= is
> added or not, it will print to VGA. And printing to VGA caused it to
> reset to firmware. That's why we see nothing when didn't specify
> earlyprintk=, but see only one line of printing about the 'KASLR
> disabled'.

Here I mean:
That's why we see nothing when didn't specify earlyprintk=, but see only
one line of printing about the 'KASLR disabled' message when
earlyprintk=ttyS0 added.

> 
> To confirm it's caused by VGA printing, I blacklist the mgag200 by
> writting it into /etc/modprobe.d/blacklist.conf. The kdump kernel can
> boot up successfully. And add 'nomodeset' can also make it work. So it's
> for sure mgag driver or related code have something wrong when booting
> code tries to re-init it.
> 
> This is the only case we ever see, tend to pursuit fix in mgag200 driver
> side. Any idea or suggestion? We have two machines to be able to
> reproduce it stablly.
> 
> Thanks
> Baoquan