Message-ID: <1561746758-23216-3-git-send-email-mikelley@microsoft.com>
Date:   Fri, 28 Jun 2019 18:34:09 +0000
From:   Michael Kelley <mikelley@...rosoft.com>
To:     "tglx@...utronix.de" <tglx@...utronix.de>,
        "mingo@...hat.com" <mingo@...hat.com>,
        "bp@...en8.de" <bp@...en8.de>, "x86@...nel.org" <x86@...nel.org>
CC:     Michael Kelley <mikelley@...rosoft.com>,
        "will.deacon@....com" <will.deacon@....com>,
        "catalin.marinas@....com" <catalin.marinas@....com>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
        "olaf@...fle.de" <olaf@...fle.de>,
        "apw@...onical.com" <apw@...onical.com>,
        vkuznets <vkuznets@...hat.com>,
        "jasowang@...hat.com" <jasowang@...hat.com>,
        "marcelo.cerri@...onical.com" <marcelo.cerri@...onical.com>,
        Sunil Muthuswamy <sunilmut@...rosoft.com>,
        KY Srinivasan <kys@...rosoft.com>,
        "sashal@...nel.org" <sashal@...nel.org>,
        "vincenzo.frascino@....com" <vincenzo.frascino@....com>,
        "linux-arch@...r.kernel.org" <linux-arch@...r.kernel.org>,
        "linux-mips@...r.kernel.org" <linux-mips@...r.kernel.org>,
        "linux-kselftest@...r.kernel.org" <linux-kselftest@...r.kernel.org>,
        "arnd@...db.de" <arnd@...db.de>,
        "linux@...linux.org.uk" <linux@...linux.org.uk>,
        "ralf@...ux-mips.org" <ralf@...ux-mips.org>,
        "paul.burton@...s.com" <paul.burton@...s.com>,
        "daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
        "salyzyn@...roid.com" <salyzyn@...roid.com>,
        "pcc@...gle.com" <pcc@...gle.com>,
        "shuah@...nel.org" <shuah@...nel.org>,
        "0x7f454c46@...il.com" <0x7f454c46@...il.com>,
        "linux@...musvillemoes.dk" <linux@...musvillemoes.dk>,
        "huw@...eweavers.com" <huw@...eweavers.com>,
        "sfr@...b.auug.org.au" <sfr@...b.auug.org.au>,
        "pbonzini@...hat.com" <pbonzini@...hat.com>,
        "rkrcmar@...hat.com" <rkrcmar@...hat.com>,
        "kvm@...r.kernel.org" <kvm@...r.kernel.org>
Subject: [PATCH v4 2/2] Drivers: hv: Move Hyper-V clocksource code to new
 clocksource driver

Continue consolidating Hyper-V clock and timer code into an ISA
independent Hyper-V clocksource driver. Move the existing clocksource
code under drivers/hv and arch/x86 to the new clocksource driver
while separating out the ISA dependencies. Update Hyper-V
initialization to call initialization and cleanup routines since the
Hyper-V synthetic clock is not independently enumerated in ACPI.
Update Hyper-V clocksource users in KVM and VDSO to get definitions
from a new include file.

No behavior is changed and no new functionality is added.

Suggested-by: Marc Zyngier <marc.zyngier@....com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@...hat.com>
Signed-off-by: Michael Kelley <mikelley@...rosoft.com>
---
 arch/x86/entry/vdso/vma.c                |   2 +-
 arch/x86/hyperv/hv_init.c                |  91 +---------------------
 arch/x86/include/asm/mshyperv.h          |  81 +++----------------
 arch/x86/include/asm/vdso/gettimeofday.h |   2 +-
 arch/x86/kvm/x86.c                       |   1 +
 drivers/clocksource/hyperv_timer.c       | 130 +++++++++++++++++++++++++++++++
 include/clocksource/hyperv_timer.h       |  78 +++++++++++++++++++
 7 files changed, 225 insertions(+), 160 deletions(-)

diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index 8db1f59..349a61d 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -22,7 +22,7 @@
 #include <asm/page.h>
 #include <asm/desc.h>
 #include <asm/cpufeature.h>
-#include <asm/mshyperv.h>
+#include <clocksource/hyperv_timer.h>
 
 #if defined(CONFIG_X86_64)
 unsigned int __read_mostly vdso64_enabled = 1;
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 1608050..0e033ef 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -17,64 +17,13 @@
 #include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
-#include <linux/clockchips.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
 #include <linux/cpuhotplug.h>
-
-#ifdef CONFIG_HYPERV_TSCPAGE
-
-static struct ms_hyperv_tsc_page *tsc_pg;
-
-struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
-{
-	return tsc_pg;
-}
-EXPORT_SYMBOL_GPL(hv_get_tsc_page);
-
-static u64 read_hv_clock_tsc(struct clocksource *arg)
-{
-	u64 current_tick = hv_read_tsc_page(tsc_pg);
-
-	if (current_tick == U64_MAX)
-		rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs_tsc = {
-		.name		= "hyperv_clocksource_tsc_page",
-		.rating		= 400,
-		.read		= read_hv_clock_tsc,
-		.mask		= CLOCKSOURCE_MASK(64),
-		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-#endif
-
-static u64 read_hv_clock_msr(struct clocksource *arg)
-{
-	u64 current_tick;
-	/*
-	 * Read the partition counter to get the current tick count. This count
-	 * is set to 0 when the partition is created and is incremented in
-	 * 100 nanosecond units.
-	 */
-	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs_msr = {
-	.name		= "hyperv_clocksource_msr",
-	.rating		= 400,
-	.read		= read_hv_clock_msr,
-	.mask		= CLOCKSOURCE_MASK(64),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
+#include <clocksource/hyperv_timer.h>
 
 void *hv_hypercall_pg;
 EXPORT_SYMBOL_GPL(hv_hypercall_pg);
-struct clocksource *hyperv_cs;
-EXPORT_SYMBOL_GPL(hyperv_cs);
 
 u32 *hv_vp_index;
 EXPORT_SYMBOL_GPL(hv_vp_index);
@@ -343,42 +292,8 @@ void __init hyperv_init(void)
 
 	x86_init.pci.arch_init = hv_pci_init;
 
-	/*
-	 * Register Hyper-V specific clocksource.
-	 */
-#ifdef CONFIG_HYPERV_TSCPAGE
-	if (ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE) {
-		union hv_x64_msr_hypercall_contents tsc_msr;
-
-		tsc_pg = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
-		if (!tsc_pg)
-			goto register_msr_cs;
-
-		hyperv_cs = &hyperv_cs_tsc;
-
-		rdmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-
-		tsc_msr.enable = 1;
-		tsc_msr.guest_physical_address = vmalloc_to_pfn(tsc_pg);
-
-		wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-
-		hyperv_cs_tsc.archdata.vclock_mode = VCLOCK_HVCLOCK;
-
-		clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
-		return;
-	}
-register_msr_cs:
-#endif
-	/*
-	 * For 32 bit guests just use the MSR based mechanism for reading
-	 * the partition counter.
-	 */
-
-	hyperv_cs = &hyperv_cs_msr;
-	if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE)
-		clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
-
+	/* Register Hyper-V specific clocksource */
+	hv_init_clocksource();
 	return;
 
 remove_cpuhp_state:
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index cc60e61..f4fa8a9 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -105,6 +105,17 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
 #define hv_get_crash_ctl(val) \
 	rdmsrl(HV_X64_MSR_CRASH_CTL, val)
 
+#define hv_get_time_ref_count(val) \
+	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, val)
+
+#define hv_get_reference_tsc(val) \
+	rdmsrl(HV_X64_MSR_REFERENCE_TSC, val)
+#define hv_set_reference_tsc(val) \
+	wrmsrl(HV_X64_MSR_REFERENCE_TSC, val)
+#define hv_set_clocksource_vdso(val) \
+	((val).archdata.vclock_mode = VCLOCK_HVCLOCK)
+#define hv_get_raw_timer() rdtsc_ordered()
+
 void hyperv_callback_vector(void);
 void hyperv_reenlightenment_vector(void);
 #ifdef CONFIG_TRACING
@@ -133,7 +144,6 @@ static inline void hv_disable_stimer0_percpu_irq(int irq) {}
 
 
 #if IS_ENABLED(CONFIG_HYPERV)
-extern struct clocksource *hyperv_cs;
 extern void *hv_hypercall_pg;
 extern void  __percpu  **hyperv_pcpu_input_arg;
 
@@ -387,73 +397,4 @@ static inline int hyperv_flush_guest_mapping_range(u64 as,
 }
 #endif /* CONFIG_HYPERV */
 
-#ifdef CONFIG_HYPERV_TSCPAGE
-struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
-static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
-				       u64 *cur_tsc)
-{
-	u64 scale, offset;
-	u32 sequence;
-
-	/*
-	 * The protocol for reading Hyper-V TSC page is specified in Hypervisor
-	 * Top-Level Functional Specification ver. 3.0 and above. To get the
-	 * reference time we must do the following:
-	 * - READ ReferenceTscSequence
-	 *   A special '0' value indicates the time source is unreliable and we
-	 *   need to use something else. The currently published specification
-	 *   versions (up to 4.0b) contain a mistake and wrongly claim '-1'
-	 *   instead of '0' as the special value, see commit c35b82ef0294.
-	 * - ReferenceTime =
-	 *        ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset
-	 * - READ ReferenceTscSequence again. In case its value has changed
-	 *   since our first reading we need to discard ReferenceTime and repeat
-	 *   the whole sequence as the hypervisor was updating the page in
-	 *   between.
-	 */
-	do {
-		sequence = READ_ONCE(tsc_pg->tsc_sequence);
-		if (!sequence)
-			return U64_MAX;
-		/*
-		 * Make sure we read sequence before we read other values from
-		 * TSC page.
-		 */
-		smp_rmb();
-
-		scale = READ_ONCE(tsc_pg->tsc_scale);
-		offset = READ_ONCE(tsc_pg->tsc_offset);
-		*cur_tsc = rdtsc_ordered();
-
-		/*
-		 * Make sure we read sequence after we read all other values
-		 * from TSC page.
-		 */
-		smp_rmb();
-
-	} while (READ_ONCE(tsc_pg->tsc_sequence) != sequence);
-
-	return mul_u64_u64_shr(*cur_tsc, scale, 64) + offset;
-}
-
-static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg)
-{
-	u64 cur_tsc;
-
-	return hv_read_tsc_page_tsc(tsc_pg, &cur_tsc);
-}
-
-#else
-static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
-{
-	return NULL;
-}
-
-static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
-				       u64 *cur_tsc)
-{
-	BUG();
-	return U64_MAX;
-}
-#endif
 #endif
diff --git a/arch/x86/include/asm/vdso/gettimeofday.h b/arch/x86/include/asm/vdso/gettimeofday.h
index a14039a..ae91429 100644
--- a/arch/x86/include/asm/vdso/gettimeofday.h
+++ b/arch/x86/include/asm/vdso/gettimeofday.h
@@ -18,7 +18,7 @@
 #include <asm/unistd.h>
 #include <asm/msr.h>
 #include <asm/pvclock.h>
-#include <asm/mshyperv.h>
+#include <clocksource/hyperv_timer.h>
 
 #define __vdso_data (VVAR(_vdso_data))
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9857992..07ddb1e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -67,6 +67,7 @@
 #include <asm/mshyperv.h>
 #include <asm/hypervisor.h>
 #include <asm/intel_pt.h>
+#include <clocksource/hyperv_timer.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 30615f3..274614d 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -14,6 +14,8 @@
 #include <linux/percpu.h>
 #include <linux/cpumask.h>
 #include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
 #include <linux/mm.h>
 #include <clocksource/hyperv_timer.h>
 #include <asm/hyperv-tlfs.h>
@@ -189,3 +191,131 @@ void hv_stimer_global_cleanup(void)
 	hv_stimer_free();
 }
 EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
+
+/*
+ * Code and definitions for the Hyper-V clocksources.  Two
+ * clocksources are defined: one that reads the Hyper-V defined MSR, and
+ * the other that uses the TSC reference page feature as defined in the
+ * TLFS.  The MSR version is for compatibility with old versions of
+ * Hyper-V and 32-bit x86.  The TSC reference page version is preferred.
+ */
+
+struct clocksource *hyperv_cs;
+EXPORT_SYMBOL_GPL(hyperv_cs);
+
+#ifdef CONFIG_HYPERV_TSCPAGE
+
+static struct ms_hyperv_tsc_page *tsc_pg;
+
+struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+	return tsc_pg;
+}
+EXPORT_SYMBOL_GPL(hv_get_tsc_page);
+
+static u64 read_hv_sched_clock_tsc(void)
+{
+	u64 current_tick = hv_read_tsc_page(tsc_pg);
+
+	if (current_tick == U64_MAX)
+		hv_get_time_ref_count(current_tick);
+
+	return current_tick;
+}
+
+static u64 read_hv_clock_tsc(struct clocksource *arg)
+{
+	return read_hv_sched_clock_tsc();
+}
+
+static struct clocksource hyperv_cs_tsc = {
+		.name		= "hyperv_clocksource_tsc_page",
+		.rating		= 400,
+		.read		= read_hv_clock_tsc,
+		.mask		= CLOCKSOURCE_MASK(64),
+		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+#endif
+
+static u64 read_hv_sched_clock_msr(void)
+{
+	u64 current_tick;
+	/*
+	 * Read the partition counter to get the current tick count. This count
+	 * is set to 0 when the partition is created and is incremented in
+	 * 100 nanosecond units.
+	 */
+	hv_get_time_ref_count(current_tick);
+	return current_tick;
+}
+
+static u64 read_hv_clock_msr(struct clocksource *arg)
+{
+	return read_hv_sched_clock_msr();
+}
+
+static struct clocksource hyperv_cs_msr = {
+	.name		= "hyperv_clocksource_msr",
+	.rating		= 400,
+	.read		= read_hv_clock_msr,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init hv_init_clocksource(void)
+{
+#ifdef CONFIG_HYPERV_TSCPAGE
+	if (ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE) {
+
+		u64		tsc_msr;
+		phys_addr_t	phys_addr;
+
+		tsc_pg = vmalloc(PAGE_SIZE);
+		if (!tsc_pg)
+			goto register_msr_cs;
+
+		hyperv_cs = &hyperv_cs_tsc;
+		phys_addr = page_to_phys(vmalloc_to_page(tsc_pg));
+
+		/* The Hyper-V TLFS specifies to preserve the value of
+		 * reserved bits in registers.  So read the existing
+		 * value, preserve the low order 12 bits, and add in
+		 * the guest physical address (which already has at
+		 * least the low 12 bits set to zero since it is page
+		 * aligned). Also set the "enable" bit, which is bit 0.
+		 */
+		hv_get_reference_tsc(tsc_msr);
+		tsc_msr &= GENMASK_ULL(11, 0);
+		tsc_msr = tsc_msr | 0x1 | (u64)phys_addr;
+		hv_set_reference_tsc(tsc_msr);
+
+		hv_set_clocksource_vdso(hyperv_cs_tsc);
+		clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
+
+		/*
+		 * sched_clock_register is needed on ARM64 but
+		 * is a no-op on x86
+		 */
+		sched_clock_register(read_hv_sched_clock_tsc,
+						64, HV_CLOCK_HZ);
+		return;
+	}
+register_msr_cs:
+#endif
+	/*
+	 * For 32 bit guests just use the MSR based mechanism for reading
+	 * the partition counter.
+	 */
+	hyperv_cs = &hyperv_cs_msr;
+	if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE) {
+		clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+
+		/*
+		 * sched_clock_register is needed on ARM64 but
+		 * is a no-op on x86
+		 */
+		sched_clock_register(read_hv_sched_clock_msr,
+						64, HV_CLOCK_HZ);
+	}
+}
+EXPORT_SYMBOL_GPL(hv_init_clocksource);
diff --git a/include/clocksource/hyperv_timer.h b/include/clocksource/hyperv_timer.h
index ba5dc17..e17e8a2 100644
--- a/include/clocksource/hyperv_timer.h
+++ b/include/clocksource/hyperv_timer.h
@@ -13,6 +13,10 @@
 #ifndef __CLKSOURCE_HYPERV_TIMER_H
 #define __CLKSOURCE_HYPERV_TIMER_H
 
+#include <linux/clocksource.h>
+#include <linux/math64.h>
+#include <asm/mshyperv.h>
+
 #define HV_MAX_MAX_DELTA_TICKS 0xffffffff
 #define HV_MIN_DELTA_TICKS 1
 
@@ -24,4 +28,78 @@
 extern void hv_stimer_global_cleanup(void);
 extern void hv_stimer0_isr(void);
 
+#if IS_ENABLED(CONFIG_HYPERV)
+extern struct clocksource *hyperv_cs;
+extern void hv_init_clocksource(void);
+#endif /* CONFIG_HYPERV */
+
+#ifdef CONFIG_HYPERV_TSCPAGE
+extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
+static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
+				       u64 *cur_tsc)
+{
+	u64 scale, offset;
+	u32 sequence;
+
+	/*
+	 * The protocol for reading Hyper-V TSC page is specified in Hypervisor
+	 * Top-Level Functional Specification ver. 3.0 and above. To get the
+	 * reference time we must do the following:
+	 * - READ ReferenceTscSequence
+	 *   A special '0' value indicates the time source is unreliable and we
+	 *   need to use something else. The currently published specification
+	 *   versions (up to 4.0b) contain a mistake and wrongly claim '-1'
+	 *   instead of '0' as the special value, see commit c35b82ef0294.
+	 * - ReferenceTime =
+	 *        ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset
+	 * - READ ReferenceTscSequence again. In case its value has changed
+	 *   since our first reading we need to discard ReferenceTime and repeat
+	 *   the whole sequence as the hypervisor was updating the page in
+	 *   between.
+	 */
+	do {
+		sequence = READ_ONCE(tsc_pg->tsc_sequence);
+		if (!sequence)
+			return U64_MAX;
+		/*
+		 * Make sure we read sequence before we read other values from
+		 * TSC page.
+		 */
+		smp_rmb();
+
+		scale = READ_ONCE(tsc_pg->tsc_scale);
+		offset = READ_ONCE(tsc_pg->tsc_offset);
+		*cur_tsc = hv_get_raw_timer();
+
+		/*
+		 * Make sure we read sequence after we read all other values
+		 * from TSC page.
+		 */
+		smp_rmb();
+
+	} while (READ_ONCE(tsc_pg->tsc_sequence) != sequence);
+
+	return mul_u64_u64_shr(*cur_tsc, scale, 64) + offset;
+}
+
+static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg)
+{
+	u64 cur_tsc;
+
+	return hv_read_tsc_page_tsc(tsc_pg, &cur_tsc);
+}
+
+#else /* CONFIG_HYPERV_TSC_PAGE */
+static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+	return NULL;
+}
+
+static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
+				       u64 *cur_tsc)
+{
+	return U64_MAX;
+}
+#endif /* CONFIG_HYPERV_TSCPAGE */
+
 #endif
-- 
1.8.3.1

Powered by blists - more mailing lists