[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <39d63d20-0fa9-9e66-a7b6-37a0f16f5925@linux.intel.com>
Date: Sat, 29 Jun 2019 00:42:55 +0300
From: Mathias Nyman <mathias.nyman@...ux.intel.com>
To: Vinod Koul <vkoul@...nel.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Christian Lamparter <chunkeey@...glemail.com>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Christian Lamparter <chunkeey@...il.com>
Subject: Re: [PATCH v4 2/4] usb: xhci: Use register defined and field names
On 26.6.2019 10.55, Vinod Koul wrote:
> Instead of using register values and fields lets define them and
> use in the driver.
>
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> Cc: Christian Lamparter <chunkeey@...glemail.com>
> Tested-by: Christian Lamparter <chunkeey@...il.com>
> ---
> drivers/usb/host/xhci-pci.c | 60 ++++++++++++++++++++++++++-----------
> 1 file changed, 43 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 237df5c47fca..0f2574b42cb1 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -57,6 +57,27 @@
> #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
> #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
>
> +#define RENESAS_FW_VERSION 0x6C
> +#define RENESAS_ROM_CONFIG 0xF0
> +#define RENESAS_FW_STATUS 0xF4
> +#define RENESAS_FW_STATUS_MSB 0xF5
> +#define RENESAS_ROM_STATUS 0xF6
> +#define RENESAS_ROM_STATUS_MSB 0xF7
> +#define RENESAS_DATA0 0xF8
> +#define RENESAS_DATA1 0xFC
> +
> +#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
> +#define RENESAS_FW_VERSION_OFFSET 8
> +
> +#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
> +#define RENESAS_FW_STATUS_LOCK BIT(1)
> +#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
> + #define RENESAS_FW_STATUS_INVALID 0
> + #define RENESAS_FW_STATUS_SUCCESS BIT(4)
> + #define RENESAS_FW_STATUS_ERROR BIT(5)
> +#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
> +#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
> +
> #define RENESAS_RETRY 10000
> #define RENESAS_DELAY 10
>
> @@ -347,7 +368,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
>
> /* step+1. Read "Set DATAX" and confirm it is cleared. */
> for (i = 0; i < RENESAS_RETRY; i++) {
> - err = pci_read_config_byte(dev, 0xF5, &fw_status);
> + err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
> + &fw_status);
> if (err)
> return pcibios_err_to_errno(err);
> if (!(fw_status & BIT(data0_or_data1)))
> @@ -362,7 +384,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
> * step+2. Write FW data to "DATAX".
> * "LSB is left" => force little endian
> */
> - err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
> + err = pci_write_config_dword(dev, data0_or_data1 ?
> + RENESAS_DATA1 : RENESAS_DATA0,
> (__force u32)cpu_to_le32(fw[step]));
> if (err)
> return pcibios_err_to_errno(err);
> @@ -370,7 +393,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
> udelay(100);
>
> /* step+3. Set "Set DATAX". */
> - err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
> + err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
> + BIT(data0_or_data1));
> if (err)
> return pcibios_err_to_errno(err);
>
> @@ -440,7 +464,7 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
> * BIOSes will initialize the device for us. If the device is
> * initialized.
> */
> - err = pci_read_config_byte(pdev, 0xF4, &fw_state);
> + err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
> if (err)
> return pcibios_err_to_errno(err);
>
> @@ -449,10 +473,10 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
> * ready we can simply continue. If the FW is not ready, we have
> * to give up.
> */
> - if (fw_state & BIT(1)) {
> + if (fw_state & RENESAS_FW_STATUS_LOCK) {
> dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
>
> - if (fw_state & BIT(4))
> + if (fw_state & RENESAS_FW_STATUS_SUCCESS)
> return 0;
>
> dev_err(&pdev->dev,
> @@ -465,33 +489,33 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
> * with it and it can't be resetted, we have to give up too... and
> * ask for a forgiveness and a reboot.
> */
> - if (fw_state & BIT(0)) {
> + if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
> dev_err(&pdev->dev,
> "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
> return -EIO;
> }
>
> /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
> - switch ((fw_state & 0x70)) {
> + switch (fw_state & RENESAS_FW_STATUS_RESULT) {
> case 0: /* No result yet */
> dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
>
> /* tell the caller, that this device needs the firmware. */
> return 1;
>
> - case BIT(4): /* Success, device should be working. */
> + case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
> dev_dbg(&pdev->dev, "FW is ready.");
> return 0;
>
> - case BIT(5): /* Error State */
> + case RENESAS_FW_STATUS_ERROR: /* Error State */
> dev_err(&pdev->dev,
> "hardware is in an error state. Giving up (poweroff/reboot needed).");
> return -ENODEV;
>
> default: /* All other states are marked as "Reserved states" */
> dev_err(&pdev->dev,
> - "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
> - (fw_state & 0x70) >> 4);
> + "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
> + (fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
> return -EINVAL;
> }
> }
> @@ -514,7 +538,8 @@ static int renesas_fw_download(struct pci_dev *pdev,
> * 0. Set "FW Download Enable" bit in the
> * "FW Download Control & Status Register" at 0xF4
> */
> - err = pci_write_config_byte(pdev, 0xF4, BIT(0));
> + err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
> + RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
> if (err)
> return pcibios_err_to_errno(err);
>
> @@ -535,7 +560,8 @@ static int renesas_fw_download(struct pci_dev *pdev,
> * is cleared by the hardware beforehand.
> */
> for (i = 0; i < RENESAS_RETRY; i++) {
> - err = pci_read_config_byte(pdev, 0xF5, &fw_status);
> + err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
> + &fw_status);
> if (err)
> return pcibios_err_to_errno(err);
> if (!(fw_status & (BIT(0) | BIT(1))))
> @@ -550,16 +576,16 @@ static int renesas_fw_download(struct pci_dev *pdev,
> * 11. After finishing writing the last data of FW, the
> * System Software must clear "FW Download Enable"
> */
> - err = pci_write_config_byte(pdev, 0xF4, 0);
> + err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
> if (err)
> return pcibios_err_to_errno(err);
>
> /* 12. Read "Result Code" and confirm it is good. */
> for (i = 0; i < RENESAS_RETRY; i++) {
> - err = pci_read_config_byte(pdev, 0xF4, &fw_status);
> + err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
> if (err)
> return pcibios_err_to_errno(err);
> - if (fw_status & BIT(4))
> + if (fw_status & RENESAS_FW_STATUS_SUCCESS)
> break;
>
> udelay(RENESAS_DELAY);
>
Most of this patch should probably be squashed together with the previous patch
-Mathias
Powered by blists - more mailing lists