linux-kernel - [PATCH v2] mtd: rawnand: stm32_fmc2: increase DMA completion timeouts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1561713486-26597-1-git-send-email-christophe.kerello@st.com>
Date:   Fri, 28 Jun 2019 11:18:06 +0200
From:   Christophe Kerello <christophe.kerello@...com>
To:     <miquel.raynal@...tlin.com>, <richard@....at>,
        <dwmw2@...radead.org>, <computersforpeace@...il.com>,
        <marek.vasut@...il.com>, <vigneshr@...com>
CC:     <bbrezillon@...nel.org>, <linux-mtd@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Amelie Delaunay <amelie.delaunay@...com>,
        Christophe Kerello <christophe.kerello@...com>
Subject: [PATCH v2] mtd: rawnand: stm32_fmc2: increase DMA completion timeouts

From: Amelie Delaunay <amelie.delaunay@...com>

When the system is overloaded, DMA data transfer completion occurs after
100ms. Increase the timeouts to let it the time to complete.

Signed-off-by: Amelie Delaunay <amelie.delaunay@...com>
Signed-off-by: Christophe Kerello <christophe.kerello@...com>
---
Changes in v2:
  - Replace the author of the patch.
  - Define FMC2_TIMEOUT_MS to 1000.

 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 4aabea2..e63acc0 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,6 +37,8 @@
 /* Max ECC buffer length */
 #define FMC2_MAX_ECC_BUF_LEN		(FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
 
+#define FMC2_TIMEOUT_MS			1000
+
 /* Timings */
 #define FMC2_THIZ			1
 #define FMC2_TIO			8000
@@ -530,7 +532,8 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
 	int ret;
 
 	ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR,
-					 sr, sr & FMC2_SR_NWRF, 10, 1000);
+					 sr, sr & FMC2_SR_NWRF, 10,
+					 FMC2_TIMEOUT_MS);
 	if (ret) {
 		dev_err(fmc2->dev, "ham timeout\n");
 		return ret;
@@ -611,7 +614,7 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
 
 	/* Wait until the BCH code is ready */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "bch timeout\n");
 		stm32_fmc2_disable_bch_irq(fmc2);
 		return -ETIMEDOUT;
@@ -696,7 +699,7 @@ static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat,
 
 	/* Wait until the decoding error is ready */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "bch timeout\n");
 		stm32_fmc2_disable_bch_irq(fmc2);
 		return -ETIMEDOUT;
@@ -969,7 +972,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 
 	/* Wait end of sequencer transfer */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "seq timeout\n");
 		stm32_fmc2_disable_seq_irq(fmc2);
 		dmaengine_terminate_all(dma_ch);
@@ -981,7 +984,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 
 	/* Wait DMA data transfer completion */
 	if (!wait_for_completion_timeout(&fmc2->dma_data_complete,
-					 msecs_to_jiffies(100))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "data DMA timeout\n");
 		dmaengine_terminate_all(dma_ch);
 		ret = -ETIMEDOUT;
@@ -990,7 +993,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 	/* Wait DMA ECC transfer completion */
 	if (!write_data && !raw) {
 		if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete,
-						 msecs_to_jiffies(100))) {
+					msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 			dev_err(fmc2->dev, "ECC DMA timeout\n");
 			dmaengine_terminate_all(fmc2->dma_ecc_ch);
 			ret = -ETIMEDOUT;
-- 
1.9.1