linux-kernel - [PATCH 2/2] regulator: s2mps11: Adjust supported buck voltages to real values

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190629114446.11381-2-krzk@kernel.org>
Date:   Sat, 29 Jun 2019 13:44:46 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Sangbeom Kim <sbkim73@...sung.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org
Subject: [PATCH 2/2] regulator: s2mps11: Adjust supported buck voltages to real values

The driver was registering buck regulators with unsupported range of
voltages for S2MPS11 devices.  Basically it assumed that all 256 values
are possible for a single 8-bit I2C register controlling buck's voltage.
This is not true, as datasheet describes subset of these which can be
used.

For example for buck[12346] the minimum voltage is 650 mV which
corresponds to register value of 0x8.  The driver was however
registering regulator starting at 600 mV, so for a step of 6.25 mV this
gave the same result.  However this allowed to try to configure
regulators to unsupported values.

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
 drivers/regulator/s2mps11.c         | 27 +++++++++++++++++----------
 include/linux/mfd/samsung/core.h    |  1 +
 include/linux/mfd/samsung/s2mps11.h |  4 +++-
 3 files changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 8f3c8730dc0d..054baaadfdfd 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -376,9 +376,10 @@ static const struct regulator_ops s2mps11_buck_ops = {
 	.ops		= &s2mps11_buck_ops,			\
 	.type		= REGULATOR_VOLTAGE,			\
 	.owner		= THIS_MODULE,				\
-	.min_uV		= MIN_600_MV,				\
+	.min_uV		= MIN_650_MV,				\
 	.uV_step	= STEP_6_25_MV,				\
-	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.linear_min_sel	= 8,					\
+	.n_voltages	= S2MPS11_BUCK12346_N_VOLTAGES,		\
 	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B1CTRL2 + (num - 1) * 2,	\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
@@ -392,9 +393,10 @@ static const struct regulator_ops s2mps11_buck_ops = {
 	.ops		= &s2mps11_buck_ops,			\
 	.type		= REGULATOR_VOLTAGE,			\
 	.owner		= THIS_MODULE,				\
-	.min_uV		= MIN_600_MV,				\
+	.min_uV		= MIN_650_MV,				\
 	.uV_step	= STEP_6_25_MV,				\
-	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.linear_min_sel	= 8,					\
+	.n_voltages	= S2MPS11_BUCK5_N_VOLTAGES,		\
 	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B5CTRL2,			\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
@@ -402,7 +404,7 @@ static const struct regulator_ops s2mps11_buck_ops = {
 	.enable_mask	= S2MPS11_ENABLE_MASK			\
 }
 
-#define regulator_desc_s2mps11_buck67810(num, min, step) {	\
+#define regulator_desc_s2mps11_buck67810(num, min, step, min_sel, voltages) {	\
 	.name		= "BUCK"#num,				\
 	.id		= S2MPS11_BUCK##num,			\
 	.ops		= &s2mps11_buck_ops,			\
@@ -410,7 +412,8 @@ static const struct regulator_ops s2mps11_buck_ops = {
 	.owner		= THIS_MODULE,				\
 	.min_uV		= min,					\
 	.uV_step	= step,					\
-	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.linear_min_sel	= min_sel,				\
+	.n_voltages	= voltages,				\
 	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B6CTRL2 + (num - 6) * 2,	\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
@@ -478,11 +481,15 @@ static const struct regulator_desc s2mps11_regulators[] = {
 	regulator_desc_s2mps11_buck1_4(3),
 	regulator_desc_s2mps11_buck1_4(4),
 	regulator_desc_s2mps11_buck5,
-	regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV),
-	regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV),
+	regulator_desc_s2mps11_buck67810(6, MIN_650_MV, STEP_6_25_MV, 8,
+					 S2MPS11_BUCK12346_N_VOLTAGES),
+	regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV, 0,
+					 S2MPS11_BUCK7810_N_VOLTAGES),
+	regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV, 0,
+					 S2MPS11_BUCK7810_N_VOLTAGES),
 	regulator_desc_s2mps11_buck9,
-	regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
+	regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV, 0,
+					 S2MPS11_BUCK7810_N_VOLTAGES),
 };
 
 static const struct regulator_ops s2mps14_reg_ops;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 3ca17eb89aa2..f1631a39acfc 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -20,6 +20,7 @@
 #define MIN_850_MV		850000
 #define MIN_800_MV		800000
 #define MIN_750_MV		750000
+#define MIN_650_MV		650000
 #define MIN_600_MV		600000
 #define MIN_500_MV		500000
 
diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
index f6c035eb87be..4805c90609c4 100644
--- a/include/linux/mfd/samsung/s2mps11.h
+++ b/include/linux/mfd/samsung/s2mps11.h
@@ -170,7 +170,9 @@ enum s2mps11_regulators {
 #define S2MPS11_ENABLE_MASK	(0x03 << S2MPS11_ENABLE_SHIFT)
 #define S2MPS11_ENABLE_SHIFT	0x06
 #define S2MPS11_LDO_N_VOLTAGES	(S2MPS11_LDO_VSEL_MASK + 1)
-#define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
+#define S2MPS11_BUCK12346_N_VOLTAGES	153
+#define S2MPS11_BUCK5_N_VOLTAGES	216
+#define S2MPS11_BUCK7810_N_VOLTAGES	225
 #define S2MPS11_BUCK9_N_VOLTAGES (S2MPS11_BUCK9_VSEL_MASK + 1)
 #define S2MPS11_RAMP_DELAY	25000		/* uV/us */
 
-- 
2.17.1