| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a5e1a6df-dff7-9e0c-9551-f78103a5462f@gmail.com>
Date: Sat, 29 Jun 2019 18:10:49 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Sowjanya Komatineni <skomatineni@...dia.com>,
thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
jason@...edaemon.net, marc.zyngier@....com,
linus.walleij@...aro.org, stefan@...er.ch, mark.rutland@....com
Cc: pdeschrijver@...dia.com, pgaikwad@...dia.com, sboyd@...nel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
jckuo@...dia.com, josephl@...dia.com, talho@...dia.com,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
mperttunen@...dia.com, spatra@...dia.com, robh+dt@...nel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH V5 11/18] clk: tegra210: Add support for Tegra210 clocks
28.06.2019 5:12, Sowjanya Komatineni пишет:
> This patch adds system suspend and resume support for Tegra210
> clocks.
>
> All the CAR controller settings are lost on suspend when core power
> goes off.
>
> This patch has implementation for saving and restoring all the PLLs
> and clocks context during system suspend and resume to have the
> clocks back to same state for normal operation.
>
> Acked-by: Thierry Reding <treding@...dia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
> drivers/clk/tegra/clk-tegra210.c | 115 ++++++++++++++++++++++++++++++++++++++-
> drivers/clk/tegra/clk.c | 14 +++++
> drivers/clk/tegra/clk.h | 1 +
> 3 files changed, 127 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index 1c08c53482a5..1b839544e086 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -9,10 +9,12 @@
> #include <linux/clkdev.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/of_platform.h>
> #include <linux/delay.h>
> #include <linux/export.h>
> #include <linux/mutex.h>
> #include <linux/clk/tegra.h>
> +#include <linux/syscore_ops.h>
> #include <dt-bindings/clock/tegra210-car.h>
> #include <dt-bindings/reset/tegra210-car.h>
> #include <linux/iopoll.h>
> @@ -20,6 +22,7 @@
> #include <soc/tegra/pmc.h>
>
> #include "clk.h"
> +#include "clk-dfll.h"
> #include "clk-id.h"
>
> /*
> @@ -225,6 +228,7 @@
>
> #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
> #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
> +#define CPU_SOFTRST_CTRL 0x380
>
> #define LVL2_CLK_GATE_OVRA 0xf8
> #define LVL2_CLK_GATE_OVRC 0x3a0
> @@ -2820,6 +2824,7 @@ static int tegra210_enable_pllu(void)
> struct tegra_clk_pll_freq_table *fentry;
> struct tegra_clk_pll pllu;
> u32 reg;
> + int ret;
>
> for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
> if (fentry->input_rate == pll_ref_freq)
> @@ -2847,10 +2852,10 @@ static int tegra210_enable_pllu(void)
> fence_udelay(1, clk_base);
> reg |= PLL_ENABLE;
> writel(reg, clk_base + PLLU_BASE);
> + fence_udelay(1, clk_base);
>
> - readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
> - reg & PLL_BASE_LOCK, 2, 1000);
> - if (!(reg & PLL_BASE_LOCK)) {
> + ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
> + if (ret) {
> pr_err("Timed out waiting for PLL_U to lock\n");
> return -ETIMEDOUT;
> }
> @@ -3283,6 +3288,103 @@ static void tegra210_disable_cpu_clock(u32 cpu)
> }
>
> #ifdef CONFIG_PM_SLEEP
> +static u32 cpu_softrst_ctx[3];
> +static struct platform_device *dfll_pdev;
> +#define car_readl(_base, _off) readl_relaxed(clk_base + (_base) + ((_off) * 4))
> +#define car_writel(_val, _base, _off) \
> + writel_relaxed(_val, clk_base + (_base) + ((_off) * 4))
> +
> +static int tegra210_clk_suspend(void)
> +{
> + unsigned int i;
> + struct device_node *node;
> +
> + tegra_cclkg_burst_policy_save_context();
> +
> + if (!dfll_pdev) {
> + node = of_find_compatible_node(NULL, NULL,
> + "nvidia,tegra210-dfll");
> + if (node)
> + dfll_pdev = of_find_device_by_node(node);
> +
> + of_node_put(node);
> + if (!dfll_pdev)
> + pr_err("dfll node not found. no suspend for dfll\n");
> + }
> +
> + if (dfll_pdev)
> + tegra_dfll_suspend(dfll_pdev);
> +
> + /* Enable PLLP_OUT_CPU after dfll suspend */
> + tegra_clk_set_pllp_out_cpu(true);
> +
> + tegra_sclk_cclklp_burst_policy_save_context();
> +
> + clk_save_context();
> +
> + for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
> + cpu_softrst_ctx[i] = car_readl(CPU_SOFTRST_CTRL, i);
> +
> + return 0;
> +}
> +
> +static void tegra210_clk_resume(void)
> +{
> + unsigned int i;
> + struct clk_hw *parent;
> + struct clk *clk;
> +
> + /*
> + * clk_restore_context restores clocks as per the clock tree.
> + *
> + * dfllCPU_out is first in the clock tree to get restored and it
> + * involves programming DFLL controller along with restoring CPUG
> + * clock burst policy.
> + *
> + * DFLL programming needs dfll_ref and dfll_soc peripheral clocks
> + * to be restores which are part ofthe peripheral clocks.
> + * So, peripheral clocks restore should happen prior to dfll clock
> + * restore.
> + */
> +
> + tegra_clk_osc_resume(clk_base);
> + for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
> + car_writel(cpu_softrst_ctx[i], CPU_SOFTRST_CTRL, i);
> +
> + /* restore all plls and peripheral clocks */
> + tegra210_init_pllu();
> + clk_restore_context();
> +
> + fence_udelay(5, clk_base);
> +
> + /* resume SCLK and CPULP clocks */
> + tegra_sclk_cpulp_burst_policy_restore_context();
> +
> + /*
> + * restore CPUG clocks:
> + * - enable DFLL in open loop mode
> + * - switch CPUG to DFLL clock source
> + * - close DFLL loop
> + * - sync PLLX state
> + */
> + if (dfll_pdev)
> + tegra_dfll_resume(dfll_pdev, false);
> +
> + tegra_cclkg_burst_policy_restore_context();
> + fence_udelay(2, clk_base);
> +
> + if (dfll_pdev)
> + tegra_dfll_resume(dfll_pdev, true);
> +
> + parent = clk_hw_get_parent(__clk_get_hw(clks[TEGRA210_CLK_CCLK_G]));
> + clk = clks[TEGRA210_CLK_PLL_X];
> + if (parent != __clk_get_hw(clk))
> + tegra_clk_sync_state_pll(__clk_get_hw(clk));
> +
> + /* Disable PLL_OUT_CPU after DFLL resume */
> + tegra_clk_set_pllp_out_cpu(false);
> +}
> +
> static void tegra210_cpu_clock_suspend(void)
> {
> /* switch coresite to clk_m, save off original source */
> @@ -3298,6 +3400,11 @@ static void tegra210_cpu_clock_resume(void)
> }
> #endif
>
> +static struct syscore_ops tegra_clk_syscore_ops = {
> + .suspend = tegra210_clk_suspend,
> + .resume = tegra210_clk_resume,
> +};
> +
> static struct tegra_cpu_car_ops tegra210_cpu_car_ops = {
> .wait_for_reset = tegra210_wait_cpu_in_reset,
> .disable_clock = tegra210_disable_cpu_clock,
> @@ -3583,5 +3690,7 @@ static void __init tegra210_clock_init(struct device_node *np)
> tegra210_mbist_clk_init();
>
> tegra_cpu_car_ops = &tegra210_cpu_car_ops;
> +
> + register_syscore_ops(&tegra_clk_syscore_ops);
> }
Is it really worthwhile to use syscore_ops for suspend/resume given that drivers for
won't resume before the CLK driver anyway? Are there any other options for CLK
suspend/resume?
I'm also not sure whether PM runtime API could be used at all in the context of
syscore_ops ..
Secondly, what about to use generic clk_save_context() / clk_restore_context()
helpers for the suspend-resume? It looks to me that some other essential (and proper)
platform driver (soc/tegra/? PMC?) should suspend-resume the clocks using the generic
CLK Framework API.
Powered by blists - more mailing lists