| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190702130448.51BF944004A@finisterre.sirena.org.uk>
Date: Tue, 2 Jul 2019 14:04:48 +0100 (BST)
From: Mark Brown <broonie@...nel.org>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
Mark Brown <broonie@...nel.org>,
Sangbeom Kim <sbkim73@...sung.com>
Subject: Applied "regulator: s2mps11: Adjust supported buck voltages to real values" to the regulator tree
The patch
regulator: s2mps11: Adjust supported buck voltages to real values
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 9d83dcb3e4553f34ee1c4f09d65173159f9eb7a7 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@...nel.org>
Date: Sat, 29 Jun 2019 13:44:46 +0200
Subject: [PATCH] regulator: s2mps11: Adjust supported buck voltages to real
values
The driver was registering buck regulators with unsupported range of
voltages for S2MPS11 devices. Basically it assumed that all 256 values
are possible for a single 8-bit I2C register controlling buck's voltage.
This is not true, as datasheet describes subset of these which can be
used.
For example for buck[12346] the minimum voltage is 650 mV which
corresponds to register value of 0x8. The driver was however
registering regulator starting at 600 mV, so for a step of 6.25 mV this
gave the same result. However this allowed to try to configure
regulators to unsupported values.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/s2mps11.c | 27 +++++++++++++++++----------
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/s2mps11.h | 4 +++-
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 7a89030187a4..5b7ba7c6c4f6 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -269,9 +269,10 @@ static const struct regulator_ops s2mps11_buck_ops = {
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = MIN_600_MV, \
+ .min_uV = MIN_650_MV, \
.uV_step = STEP_6_25_MV, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = 8, \
+ .n_voltages = S2MPS11_BUCK12346_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -285,9 +286,10 @@ static const struct regulator_ops s2mps11_buck_ops = {
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = MIN_600_MV, \
+ .min_uV = MIN_650_MV, \
.uV_step = STEP_6_25_MV, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = 8, \
+ .n_voltages = S2MPS11_BUCK5_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B5CTRL2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -295,7 +297,7 @@ static const struct regulator_ops s2mps11_buck_ops = {
.enable_mask = S2MPS11_ENABLE_MASK \
}
-#define regulator_desc_s2mps11_buck67810(num, min, step) { \
+#define regulator_desc_s2mps11_buck67810(num, min, step, min_sel, voltages) { \
.name = "BUCK"#num, \
.id = S2MPS11_BUCK##num, \
.ops = &s2mps11_buck_ops, \
@@ -303,7 +305,8 @@ static const struct regulator_ops s2mps11_buck_ops = {
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
- .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = voltages, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
@@ -371,11 +374,15 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_buck1_4(3),
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
- regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(6, MIN_650_MV, STEP_6_25_MV, 8,
+ S2MPS11_BUCK12346_N_VOLTAGES),
+ regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
+ regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
regulator_desc_s2mps11_buck9,
- regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV, 0,
+ S2MPS11_BUCK7810_N_VOLTAGES),
};
static const struct regulator_ops s2mps14_reg_ops;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 3ca17eb89aa2..f1631a39acfc 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -20,6 +20,7 @@
#define MIN_850_MV 850000
#define MIN_800_MV 800000
#define MIN_750_MV 750000
+#define MIN_650_MV 650000
#define MIN_600_MV 600000
#define MIN_500_MV 500000
diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
index 6e7668a389a1..fc67c9e75bba 100644
--- a/include/linux/mfd/samsung/s2mps11.h
+++ b/include/linux/mfd/samsung/s2mps11.h
@@ -170,7 +170,9 @@ enum s2mps11_regulators {
#define S2MPS11_ENABLE_MASK (0x03 << S2MPS11_ENABLE_SHIFT)
#define S2MPS11_ENABLE_SHIFT 0x06
#define S2MPS11_LDO_N_VOLTAGES (S2MPS11_LDO_VSEL_MASK + 1)
-#define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
+#define S2MPS11_BUCK12346_N_VOLTAGES 153
+#define S2MPS11_BUCK5_N_VOLTAGES 216
+#define S2MPS11_BUCK7810_N_VOLTAGES 225
#define S2MPS11_BUCK9_N_VOLTAGES (S2MPS11_BUCK9_VSEL_MASK + 1)
#define S2MPS11_RAMP_DELAY 25000 /* uV/us */
--
2.20.1
Powered by blists - more mailing lists