| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJNLGsz9SGZV-+Si+6zyg91k3FebE2AwydwqTZb_ZLziwitLNw@mail.gmail.com>
Date: Tue, 2 Jul 2019 16:10:21 +0300
From: Andra Danciu <andradanciu1997@...il.com>
To: shawnguo@...nel.org
Cc: robh+dt@...nel.org, mark.rutland@....com, s.hauer@...gutronix.de,
kernel@...gutronix.de, Fabio Estevam <festevam@...il.com>,
linux-imx@....com, l.stach@...gutronix.de, abel.vesa@....com,
Anson.Huang@....com, andrew.smirnov@...il.com, angus@...ea.ca,
ccaione@...libre.com, agx@...xcpu.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM64: dts: freescale: add wand-pi-8m dtb
Please ignore this. Sent the wrong patch!
În mar., 2 iul. 2019 la 16:02, Andra Danciu <andradanciu1997@...il.com> a scris:
>
> From: Richard Hu <richard.hu@...hnexion.com>
>
> Add dtb for WAND-PI-8M board.
> ---
> arch/arm64/boot/dts/freescale/Makefile | 3 +-
> arch/arm64/boot/dts/freescale/wand-pi-8m.dts | 780 +++++++++++++++++++++++++++
> 2 files changed, 782 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/freescale/wand-pi-8m.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 7a9dae6c43f5..308bbb1caa60 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -51,7 +51,8 @@ dtb-$(CONFIG_ARCH_FSL_IMX8MQ) += fsl-imx8mq-ddr3l-arm2.dtb \
> fsl-imx8mq-evk-dual-display.dtb \
> fsl-imx8mq-evk-ak4497.dtb \
> fsl-imx8mq-evk-audio-tdm.dtb \
> - fsl-imx8mq-evk-drm.dtb
> + fsl-imx8mq-evk-drm.dtb \
> + wand-pi-8m.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/freescale/wand-pi-8m.dts b/arch/arm64/boot/dts/freescale/wand-pi-8m.dts
> new file mode 100644
> index 000000000000..cc1d55ee88e2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/wand-pi-8m.dts
> @@ -0,0 +1,780 @@
> +/*
> + * Copyright 2018 Wandboard, Org.
> + * Copyright 2017 NXP
> + *
> + * Author: Richard Hu <hakahu@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-imx8mq.dtsi"
> +
> +/ {
> + model = "WAND-PI-8M";
> + compatible = "wand,imx8mq-wand-pi", "fsl,imx8mq";
> +
> + chosen {
> + bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
> + stdout-path = &uart1;
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usdhc2_vmmc: usdhc2_vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_gpio_dvfs: regulator-gpio {
> + compatible = "regulator-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dvfs>;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "gpio_dvfs";
> + regulator-type = "voltage";
> + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + states = <900000 0x1 1000000 0x0>;
> + };
> + };
> +
> + modem_reset: modem-reset {
> + compatible = "gpio-reset";
> + reset-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <2000>;
> + reset-post-delay-ms = <40>;
> + #reset-cells = <0>;
> + };
> +
> + wm8524: wm8524 {
> + compatible = "wlf,wm8524";
> + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> + clock-names = "mclk";
> + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + sound-wm8524 {
> + compatible = "fsl,imx-audio-wm8524";
> + model = "wm8524-audio";
> + audio-cpu = <&sai2>;
> + audio-codec = <&wm8524>;
> + audio-routing =
> + "Line Out Jack", "LINEVOUTL",
> + "Line Out Jack", "LINEVOUTR";
> + };
> +
> + sound-hdmi {
> + compatible = "fsl,imx-audio-cdnhdmi";
> + model = "imx-audio-hdmi";
> + audio-cpu = <&sai4>;
> + protocol = <1>;
> + };
> +
> + sound-spdif {
> + compatible = "fsl,imx-audio-spdif";
> + model = "imx-spdif";
> + spdif-controller = <&spdif1>;
> + spdif-out;
> + spdif-in;
> + };
> +
> + sound-hdmi-arc {
> + compatible = "fsl,imx-audio-spdif";
> + model = "imx-hdmi-arc";
> + spdif-controller = <&spdif2>;
> + spdif-in;
> + };
> +};
> +
> +&clk {
> + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>;
> + assigned-clock-rates = <786432000>;
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + wand-pi-8m {
> + pinctrl_csi1: csi1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19
> + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
> + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x59
> + >;
> + };
> + pinctrl_csi2: csi2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19
> + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
> + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x59
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> + >;
> + };
> +
> +
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C4_SCL_GPIO5_IO20 0x16
> + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16
> + MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16
> + >;
> + };
> +
> + pinctrl_pcie1: pcie1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C4_SDA_GPIO5_IO21 0x16
> + MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x16
> + MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x16
> + >;
> + };
> +
> + pinctrl_dvfs: dvfsgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16
> + >;
> + };
> +
> + pinctrl_qspi: qspigrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> +
> + >;
> + };
> +
> + pinctrl_typec: typecgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x16
> + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x17059
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
> + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49
> + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49
> + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2grpgpio {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
> + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
> + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
> + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6
> + >;
> + };
> +
> + pinctrl_spdif1: spdif1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
> + MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + at803x,led-act-blind-workaround;
> + at803x,eee-disabled;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze100@08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3ab {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> +
> + typec_ptn5100: ptn5110@50 {
> + compatible = "usb,tcpci";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_typec>;
> + reg = <0x50>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <3 8>;
> + ss-sel-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> + src-pdos = <0x380190c8>;
> + snk-pdos = <0x380190c8 0x3802d0c8>;
> + max-snk-mv = <9000>;
> + max-snk-ma = <1000>;
> + op-snk-mw = <9000>;
> + port-type = "drp";
> + default-role = "sink";
> + };
> +
> + ov5640_mipi: ov5640_mipi@3c {
> + compatible = "ovti,ov5640_mipi";
> + reg = <0x3c>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_csi1>;
> + clocks = <&clk IMX8MQ_CLK_CLKO2_DIV>;
> + clock-names = "csi_mclk";
> + assigned-clocks = <&clk IMX8MQ_CLK_CLKO2_SRC>,
> + <&clk IMX8MQ_CLK_CLKO2_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_200M>;
> + assigned-clock-rates = <0>, <20000000>;
> + csi_id = <0>;
> + pwn-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> + rst-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> + mclk = <20000000>;
> + mclk_source = <0>;
> + port {
> + ov5640_mipi1_ep: endpoint {
> + remote-endpoint = <&mipi1_sensor_ep>;
> + };
> + };
> + };
> +
> + ov5640_mipi2: ov5640_mipi2@3c {
> + compatible = "ovti,ov5640_mipi";
> + reg = <0x3c>;
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_csi2>;
> + clocks = <&clk IMX8MQ_CLK_CLKO2_DIV>;
> + clock-names = "csi_mclk";
> + assigned-clocks = <&clk IMX8MQ_CLK_CLKO2_SRC>,
> + <&clk IMX8MQ_CLK_CLKO2_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_200M>;
> + assigned-clock-rates = <0>, <20000000>;
> + csi_id = <0>;
> + pwn-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + rst-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> + mclk = <20000000>;
> + mclk_source = <0>;
> + port {
> + ov5640_mipi2_ep: endpoint {
> + remote-endpoint = <&mipi2_sensor_ep>;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "disabled";
> +};
> +
> +&pcie0{
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + clkreq-gpio = <&gpio5 20 GPIO_ACTIVE_LOW>;
> + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> + reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
> + ext_osc = <1>;
> + hard-wired = <1>;
> + status = "okay";
> +};
> +
> +&pcie1{
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie1>;
> + clkreq-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
> + disable-gpio = <&gpio5 10 GPIO_ACTIVE_LOW>;
> + reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
> + ext_osc = <1>;
> + status = "okay";
> +};
> +
> +&uart1 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART1_SRC>;
> + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
> + status = "okay";
> +};
> +
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash0: n25q256a@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "micron,n25q256a";
> + spi-max-frequency = <29000000>;
> + spi-nor,ddr-quad-read-dummy = <6>;
> + };
> +};
> +
> +&uart3 { /* BT */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART3_SRC>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + fsl,uart-has-rtscts;
> + resets = <&modem_reset>;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb3_0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + status = "okay";
> + extcon = <&typec_ptn5100>;
> + dr_mode = "otg";
> +};
> +
> +&usb3_phy1 {
> + status = "okay";
> +};
> +
> +&usb3_1 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&sai2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai2>;
> + assigned-clocks = <&clk IMX8MQ_CLK_SAI2_SRC>,
> + <&clk IMX8MQ_CLK_SAI2_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <0>, <24576000>;
> + status = "okay";
> +};
> +
> +&sai4 {
> + assigned-clocks = <&clk IMX8MQ_CLK_SAI4_SRC>,
> + <&clk IMX8MQ_CLK_SAI4_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <0>, <24576000>;
> + status = "okay";
> +};
> +
> +&spdif1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spdif1>;
> + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1_SRC>,
> + <&clk IMX8MQ_CLK_SPDIF1_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <0>, <24576000>;
> + status = "okay";
> +};
> +
> +&spdif2 {
> + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2_SRC>,
> + <&clk IMX8MQ_CLK_SPDIF2_DIV>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <0>, <24576000>;
> + status = "okay";
> +};
> +
> +&gpu_pd {
> + power-supply = <&sw1a_reg>;
> +};
> +
> +&vpu_pd {
> + power-supply = <&sw1c_reg>;
> +};
> +
> +&gpu {
> + status = "okay";
> +};
> +
> +&vpu {
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&mu {
> + status = "okay";
> +};
> +
> +&rpmsg{
> + /*
> + * 64K for one rpmsg instance:
> + * --0xb8000000~0xb800ffff: pingpong
> + */
> + vdev-nums = <1>;
> + reg = <0x0 0xb8000000 0x0 0x10000>;
> + status = "okay";
> +};
> +
> +&A53_0 {
> + operating-points = <
> + /* kHz uV */
> + 1500000 1000000
> + 1300000 1000000
> + 1000000 900000
> + 800000 900000
> + >;
> + dc-supply = <®_gpio_dvfs>;
> +};
> +
> +&dcss {
> + status = "okay";
> +
> + disp-dev = "hdmi_disp";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_cec {
> + status = "okay";
> +};
> +
> +&csi1_bridge {
> + fsl,mipi-mode;
> + fsl,two-8bit-sensor-mode;
> + status = "okay";
> +
> + port {
> + csi1_ep: endpoint {
> + remote-endpoint = <&csi1_mipi_ep>;
> + };
> + };
> +};
> +
> +&csi2_bridge {
> + fsl,mipi-mode;
> + fsl,two-8bit-sensor-mode;
> + status = "disabled";
> +
> + port {
> + csi2_ep: endpoint {
> + remote-endpoint = <&csi2_mipi_ep>;
> + };
> + };
> +};
> +
> +&mipi_csi_1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> + port {
> + mipi1_sensor_ep: endpoint1 {
> + remote-endpoint = <&ov5640_mipi1_ep>;
> + data-lanes = <1 2>;
> + };
> +
> + csi1_mipi_ep: endpoint2 {
> + remote-endpoint = <&csi1_ep>;
> + };
> + };
> +};
> +
> +&mipi_csi_2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + port {
> + mipi2_sensor_ep: endpoint1 {
> + remote-endpoint = <&ov5640_mipi2_ep>;
> + data-lanes = <1 2>;
> + };
> +
> + csi2_mipi_ep: endpoint2 {
> + remote-endpoint = <&csi2_ep>;
> + };
> + };
> +};
> --
> 2.11.0
>
Powered by blists - more mailing lists